ExtraHop Explore Admin UI Guide

You must configure an email server and sender before the ExtraHop system can send alert notifications or scheduled reports.

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
2. In the Network Settings section, click Notifications.
3. Click Email Server and Sender.
4. In the SMTP Server field, type the IP address or hostname for the outgoing SMTP mail server.
   The SMTP server is the fully qualified domain name (FQDN) or IP address of an outgoing mail server that is accessible from the ExtraHop system. If the DNS server is set, then the SMTP server can be a FQDN, otherwise you must type an IP address.
5. In the SMTP Port field, type the port number for SMTP communication.
   Port 25 is the default value for SMTP, and port 465 is the default value for TLS encrypted SMTP.
6. From the Encryption drop-down list, select one of the following encryption methods:

   None

   SMTP communication is not encrypted.

   TLS

   SMTP communication is encrypted through the Secure Socket Layer/Transport Layer Security protocol.

   STARTTLS

   SMTP communication is encrypted through STARTTLS.

7. In the Alert Sender Address field, type the email address for the notification sender.

   Note:

   The displayed sender address might be changed by the SMTP server. When sending through a Google SMTP server, for example, the sender email is changed to the username supplied for authentication, instead of the originally entered sender address.

8. (Optional): Select the Validate SSL Certificates checkbox to enable certificate validation.
   If you select this option, the certificate on the remote endpoint is validated against the root certificate chains specified by the trusted certificates manager. Note that the host name specified in the certificate presented by the SMTP server must match the hostname specified in your SMTP configuration or validation will fail. In addition, you must configure which certificates you want to trust on the Trusted Certificates page. For more information, see Add a trusted certificate to your ExtraHop system.
9. In the Report Sender Address field, type the email address responsible for sending the message.
   This field is only applicable when sending scheduled reports from an ExtraHop console or RevealX 360.
10. Select the Enable SMTP authentication checkbox.
11. In the Username and Password fields, type the SMTP server setup credentials.
12. (Optional): Click Test Settings, type your email address, and then click Send.
    You should receive an email message with the subject title ExtraHop Test Email.
13. Click Save.

You can send system storage alerts to individual recipients. Alerts are sent under the following conditions:

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
2. In the Network Settings section, click Notifications.
3. Under Notifications, click Email Addresses.
4. In the Email address text box, type the recipient email address.
5. Click Save.

The state of the network can be monitored through the Simple Network Management Protocol (SNMP). SNMP collects information by polling devices on the network. SNMP enabled devices can also send alerts to SNMP management stations. SNMP communities define the group where devices and management stations running SNMP belong, which specifies where information is sent. The community name identifies the group.

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
2. In the Network Settings section, click Notifications.
3. Under Notifications, click SNMP.
4. On the SNMP Settings page, in the SNMP Monitor field, type the hostname for the SNMP trap receiver.
   Separate multiple hostnames with commas.
5. In the SNMP Community field, type the SNMP community name.
6. In the SNMP Port field, type the SNMP port number for your network that is used by the SNMP agent to respond back to the source port on the SNMP manager.
   The default response port is 162.
7. (Optional): Click Test Settings to verify that your SNMP settings are correct.
   If the settings are correct, you should see an entry in the SNMP log file on the SNMP server similar to this example, where 192.0.2.0 is the IP address of your ExtraHop system and 192.0.2.255 is the IP address of the SNMP server:
   A response similar to this example displays:

   Connection from UDP: [192.0.2.0]:42164->[ 192.0.2.255]:162

   Copy
8. Click Save.

The syslog export option enables you to send alerts from an ExtraHop system to any remote system that receives syslog input for long-term archiving and correlation with other sources.

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
2. In the Network Settings section, click Notifications.
3. In the Destination field, type the IP address of the remote syslog server.
4. From the Protocol drop-down list, select TCP or UDP.
   This option specifies the protocol over which the information will be sent to your remote syslog server.
5. In the Port field, type the port number for your remote syslog server.
   The default value is 514.
6. Click Test Settings to verify that your syslog settings are correct.
   If the settings are correct, you should see an entry in the syslog log file on the syslog server similar to the following:

   Jul 27 21:54:56 extrahop name="ExtraHop Test" event_id=1

   Copy
7. Click Save.
8. (Optional): Modify the format of syslog messages.
   By default, syslog messages are not compliant with RFC 3164 or RFC 5424. However, you can format syslog messages to be compliant by modifying the running configuration file.
   1. Click Admin.
   2. Click Running Config (Unsaved Changes).
   3. Click Edit Config.
   4. Add an entry under syslog_notification, where the key is rfc_compliant_format and the value is either rfc5424 or rfc3164.
      The syslog_notification section should look similar to the following code:

          "syslog_notification": {
              "syslog_destination": "192.168.0.0",
              "syslog_ipproto": "udp",
              "syslog_port": 514,
              "rfc_compliant_format": "rfc5424"
          }

      Copy
   5. Click Update.
   6. Click Done.
9. (Optional): Modify the timezone referenced in syslog timestamps.
   By default, syslog timestamps reference UTC time. However, you can modify timestamps to reference the ExtraHop system time by modifying the running configuration file.
   1. Click Admin.
   2. Click Running Config (Unsaved Changes).
   3. Click Edit Config.
   4. Add an entry under syslog_notification where the key is syslog_use_localtime and the value is true.
      The syslog_notification section should look similar to the following code:

          "syslog_notification": {
              "syslog_destination": "192.168.0.0",
              "syslog_ipproto": "udp",
              "syslog_port": 514,
              "syslog_use_localtime": true
          }

      Copy
   5. Click Update.
   6. Click Done.

You must upload a .pem file that includes both a private key and either a self-signed certificate or a certificate-authority certificate.

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
2. In the Network Settings section, click TLS Certificate.
3. Click Manage certificates to expand the section.
4. Click Choose File and navigate to the certificate that you want to upload.
5. Click Open.
6. Click Upload.
7. Save the running configuration file

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
2. In the Network Settings section, click TLS Certificate.
3. Click Manage certificates to expand the section.
4. Click Build SSL self-signed certificate based on hostname.
5. On the Generate Certificate page, click OK to generate the TLS self-signed certificate.

   Note:

   The default hostname is extrahop.

6. Save the running configuration file

A certificate signing request (CSR) is a block of encoded text that is given to your Certificate Authority (CA) when you apply for an TLS certificate. The CSR is generated on the ExtraHop system where the TLS certificate will be installed and contains information that will be included in the certificate such as the common name (domain name), organization, locality, and country. The CSR also contains the public key that will be included in the certificate. The CSR is created with the private key from the ExtraHop system, making a key pair.

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
2. In the Network Settings section, click TLS Certificate.
3. Click Manage certificates and then click Export a Certificate Signing Request (CSR).
4. In the Subject Alternative Names section, type the DNS name of the ExtraHop system.
   You can add multiple DNS names and IP addresses to be protected by a single TLS Certificate.
5. In the Subject section, complete the following fields.
   Only the Common Name field is required.

   Field	Description	Examples
   Common Name	The fully qualified domain name (FQDN) of the ExtraHop system. The FQDN must match one of the Subject Alternative Names.	*.example.com discover.example.com
   E-mail Address	The email address of the primary contact for your organization.	webmaster@example.com
   Organizational Unit	The division of your organization handling the certificate.	IT Department
   Organization	The legal name of your organization. This entry should not be abbreviated and should include suffixes such as Inc, Corp, or LLC.	Example, Inc.
   Locality/City	The city where your organization is located.	Seattle
   State/Province	The state or province where your organization is located. This entry should not be abbreviated.	Washington
   Country Code	The two-letter ISO code for the country where your organization is located.	US

6. Click Export.
   The CSR file is automatically downloaded to your computer.

1. In the Access Settings section, click Support Access.
2. Click Generate SSH Key.
3. Copy the encrypted key from the text box and email the key to your ExtraHop representative.
4. Click Done.

To prevent SSH access to the ExtraHop system with an existing SSH key, you can revoke the current SSH key. A new SSH key can also be regenerated if needed.

1. In the Access Settings section, click Support Access.
2. Click Generate SSH Key.
3. Choose one of the following options:
   • Click Regenerate SSH Key and then click Regenerate.

     Copy the encrypted key from the text box and email the key to your ExtraHop representative and then click Done.

   • Click Revoke SSH Key to prevent SSH access to the system with the current key.

By adding a local user account, you can provide users with direct access to your ExtraHop system and restrict their privileges as needed by their role in your organization.

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
2. In the Access Settings section, click Users.
3. Click Add User.
4. In the Personal Information section, in the Login ID field, type the username that users will log in to the sensor with, which cannot contain any spaces.
   For example, adalovelace.
5. In the Full Name field, type a display name for the user.
   The name can contain spaces. For example, Ada Lovelace.
6. In the Password field, type the password for this account.

   Note:

   On sensors and consoles, the password must meet the criteria specified by the global password policy. On ExtraHop recordstores and packetstores, passwords must be 5 characters or more.

7. In the Confirm Password field, re-type the password from the Password field.
8. In the Authentication Type section, select Local.
9. In the User Type section, select the type of privileges for the user.
   • System and access administration privileges enables full read and write access to the ExtraHop system, including Administration settings.
   • Limited privileges enable you to select from a subset of privileges and options.

   Note:

   For more information, see the User privileges section.

10. Click Save.

The ExtraHop system supports the Lightweight Directory Access Protocol (LDAP) for authentication and authorization. Instead of storing user credentials locally, you can configure your ExtraHop system to authenticate users remotely with an existing LDAP server. Note that ExtraHop LDAP authentication only queries for user accounts; it does not query for any other entities that might be in the LDAP directory.

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
2. In the Access Settings section, click Remote Authentication.
3. From the Remote authentication method drop-down list, select LDAP and then click Continue.
4. On the LDAP Settings page, complete the following server information fields:
   1. In the Hostname field, type the hostname or IP address of the LDAP server. If you are configuring a hostname, make sure that the DNS entry of the ExtraHop system is properly configured.
   2. In the Port field, type the port number on which the LDAP server is listening.
   3. From the Server Type drop-down list, select Posix or Active Directory.
   4. (Optional): In the Bind DN field, type the bind DN. The bind DN is the user credentials that allow you to authenticate with the LDAP server to perform the user search. The bind DN must have list access to the base DN and any OU, groups, or user account required for LDAP authentication. If this value is not set, then an anonymous bind is performed. Note that anonymous binds are not enabled on all LDAP servers.
   5. (Optional): In the Bind Password field, type the bind password. The bind password is the password required when authenticating with the LDAP server as the bind DN specified above. If you are configuring an anonymous bind, leave this field blank. In some cases, an unauthenticated bind is possible, where you supply a Bind DN value but no bind password. Consult your LDAP administrator for the proper settings.
   6. From the Encryption drop-down list, select one of the following encryption options.

      None: This options specifies cleartext TCP sockets. All passwords are sent across the network in cleartext in this mode.

      LDAPS: This option specifies LDAP wrapped inside TLS.

      StartTLS: This option specifies TLS LDAP. (TLS is negotiated before any passwords are sent.)

   7. Select Validate SSL Certificates to enable certificate validation. If you select this option, the certificate on the remote endpoint is validated against the root certificates as specified by the trusted certificates manager. You must configure which certificates you want to trust on the Trusted Certificates page. For more information, see Add a trusted certificate to your ExtraHop system.
   8. In the Refresh Interval field, type a time value or leave the default setting of 1 hour.
      The refresh interval ensures that any changes made to user or group access on the LDAP server are updated on the ExtraHop system.
5. Configure the following user settings:
   1. In the Base DN field, type the base distinguished name (DN).
      The Base DN is the point from where a server will search for users. The base DN must contain all user accounts that will have access to the ExtraHop system. The users can be direct members of the base DN or nested within an OU within the base DN if the Whole Subtree option is selected for the Search Scope specified below.
   2. In the Search Filter field, type a search filter.
      Search filters enable you to define search criteria when searching the LDAP directory for user accounts.

      Important:

      The ExtraHop system automatically adds parentheses to wrap the filter and will not parse this parameter correctly if you add parentheses manually. Add your search filters in this step and in step 5b, similar to the following example: cn=atlas* |(cn=EH-*)(cn=IT-*) In addition, if your group names include the asterisk (*) character, the asterisk must be escaped as Copy \2a. For example, if your group has a CN called test*group, type cn=test\2agroup in the Search Filter field.

   3. From the Search Scope drop-down list, select one of the following options.
      Search scope specifies the scope of the directory search when looking for user entities.

      Whole subtree: This option looks recursively under the group DN for matching users.

      Single level: This option looks for users that exist in the base DN only; not any subtrees.

6. (Optional): To import user groups, select the Import user groups from LDAP server checkbox and configure the following settings.

   Note:

   Importing LDAP user groups enables you to share dashboards with those groups. The imported groups appear on the User Group page in the Administration settings.

   1. In the Base DN field, type the base DN.
      The Base DN is the point from where a server will search for user groups. The base DN must contain all user groups that will have access to the ExtraHop system. The user groups can be direct members of the base DN or nested within an OU within the base DN if the Whole Subtree option is selected for the Search Scope specified below.
   2. In the Search Filter field type a search filter.
      Search filters enable you to define search criteria when searching the LDAP directory for user groups.

      Important:

      For group search filters, the ExtraHop system implicitly filters on the objectclass=group, and so objectclass=group should not be added to this filter.

   3. From the Search Scope drop-down list, select one of the following options.
      Search scope specifies the scope of the directory search when looking for user group entities.

      Whole subtree: This option looks recursively under the base DN for matching user groups.

      Single level: This option looks for user groups that exist in the base DN; not any subtrees.

7. Click Test Settings.
   If the test succeeds, a status message appears near the bottom of the page. If the test fails, click Show details to see a list of errors. You must resolve any errors before you continue.
8. Click Save and Continue.

The ExtraHop system supports Remote Authentication Dial In User Service (RADIUS) for remote authentication and local authorization only. For remote authentication, the ExtraHop system supports unencrypted RADIUS and plaintext formats.

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
2. In the Access Settings section, click Remote Authentication.
3. From the Remote authentication method drop-down list, select RADIUS and then click Continue.
4. On the Add RADIUS Server page, type the following information:

   Host

   The hostname or IP address of the RADIUS server. Make sure that the DNS of the ExtraHop system is properly configured if you specify a hostname.

   Secret

   The shared secret between the ExtraHop system and the RADIUS server. Contact your RADIUS administrator to obtain the shared secret.

   Timeout

   The amount of time in seconds that the ExtraHop system waits for a response from the RADIUS server before attempting the connection again.

5. Click Add Server.
6. (Optional): Add additional servers as needed.
7. Click Save and Finish.
8. From the Privilege assignment options drop-down list, choose one of the following options:
   • Remote users have full write access

     This option grants remote users full write access to the ExtraHop system. In addition, you can grant additional access for packet downloads, TLS session keys, NDR module access, and NPM module access.

   • Remote users have full read-only access

     This option grants remote users read-only access to the ExtraHop system. In addition, you can grant additional access for packet downloads, TLS session keys, NDR module access, and NPM module access.

9. (Optional): Configure packet and session key access. Select one of the following options to allow remote users to download packet captures and TLS session keys.
   • No access
   • Packet slices only
   • Packets only
   • Packets and session keys
10. (Optional): Configure NDR and NPM module access.
    • No access
    • Full access
11. Click Save and Finish.
12. Click Done.

The ExtraHop system supports Terminal Access Controller Access-Control System Plus (TACACS+) for remote authentication and authorization.

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
2. In the Access Settings section, click Remote Authentication.
3. From the Remote authentication method drop-down list, select TACACS+, and then click Continue.
4. On the Add TACACS+ Server page, type the following information:

   Host: The hostname or IP address of the TACACS+ server. Make sure that the DNS of the ExtraHop system is properly configured if you are entering a hostname.

   Secret: The shared secret between the ExtraHop system and the TACACS+ server. Contact your TACACS+ administrator to obtain the shared secret.

   Note:

   The secret cannot include the number sign (#).

   Timeout: The amount of time in seconds that the ExtraHop system waits for a response from the TACACS+ server before attempting to connect again.

5. Click Add Server.
6. (Optional): Add additional servers as needed.
7. Click Save and Finish.
8. From the Permission assignment options drop-down list, choose one of the following options:
   • Obtain privileges level from remote server

     This option allows remote users to obtain privilege levels from the remote server. You must also configure permissions on the TACACS+ server.

   • Remote users have full write access

     This option grants remote users full write access to the ExtraHop system. In addition, you can grant additional access for packet downloads, TLS session keys, NDR module access, and NPM module access.

   • Remote users have full read-only access

     This option grants remote users read-only access to the ExtraHop system. In addition, you can grant additional access for packet downloads, TLS session keys, NDR module access, and NPM module access.

9. (Optional): Configure packet and session key access. Select one of the following options to allow remote users to download packet captures and TLS session keys.
   • No access
   • Packet slices only
   • Packets only
   • Packets and session keys
10. (Optional): Configure NDR and NPM module access.
    • No access
    • Full access
11. Click Save and Finish.
12. Click Done.

Users with system and access administration privileges can configure whether users can generate API keys for the ExtraHop system. You can allow only local users to generate keys, or you can also disable API key generation entirely.

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
2. In the Access Settings section, click API Access.
3. In the Manage API Access section, select one of the following options:
   • Allow all users to generate an API key: Local and remote users can generate API keys.
   • Only local users can generate an API key: Remote users cannot generate API keys.
   • No users can generate an API key: No API keys can be generated by any user.
4. Click Save Settings.

Cross-origin resource sharing (CORS) allows you to access the ExtraHop REST API across domain-boundaries and from specified web pages without requiring the request to travel through a proxy server.

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
2. In the Access Settings section, click API Access.
3. In the CORS Settings section, specify one of the following access configurations.
   • To add a specific URL, type an origin URL in the text box, and then click the plus (+) icon or press ENTER.

     The URL must include a scheme, such as HTTP or HTTPS, and the exact domain name. You cannot append a path; however, you can provide a port number.

   • To allow access from any URL, select the Allow API requests from any Origin checkbox.

     Note:

     Allowing REST API access from any origin is less secure than providing a list of explicit origins.

4. Click Save Settings and then click Done.

You must generate an API key before you can perform operations through the ExtraHop REST API. Keys can be viewed only by the user who generated the key or by users with system and access administration privileges. After you generate an API key, add the key to your request headers or the ExtraHop REST API Explorer.

1. In the Access Settings section, click API Access.
2. In the Generate an API Key section, type a description for the new key, and then click Generate.
3. Scroll down to the API Keys section and copy the API key that matches your description.

When you modify any of the system configuration settings on an ExtraHop system, you must confirm the updates by saving the running configuration file. If you do not save the settings, the changes are lost when your ExtraHop system restarts.

1. Click View and Save Changes.
   
2. Review the comparison between the old running configuration and the current (unsaved) running configuration, and then select from the following options:
   • If the changes are correct, click Save.
   • If the changes are not correct, click Cancel and then revert the changes by clicking Revert config.

You can download the running configuration file to your workstation. You can open this text file and make changes to it locally, before copying those changes into the Running Config window.

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
2. In the Appliance Settings section, click Running Config.
3. Click Download config as a file.

By default, the ExtraHop system synchronizes the system time through the *.extrahop.pool.ntp.org network time protocol (NTP) servers. If your network environment prevents the ExtraHop system from communicating with these time servers, you must configure an alternate time server source.

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
2. In the Appliance Settings section, click System Time.
3. Click Configure Time.
4. From the Select time zone drop-down list, select your time zone.
5. Click Save and Continue.
6. On the Time Setup page, select one of the following options:
   • Set time manually

     Note:

     You cannot manually set the time for sensors that are managed by a console or RevealX 360.

   • Set time with NTP server
7. Select Set time with NTP server and then click Select.
   The ExtraHop time servers, 0.extrahop.pool.ntp.org, 1.extrahop.pool.ntp.org, 2.extrahop.pool.ntp.org, and 3.extrahop.pool.ntp.org appear in the first four Time Server fields by default.
8. In the Time Server fields, type the IP address or fully qualified domain name (FQDN) for the time servers.
   You can specify up to nine time servers.

   Tip:	After adding the fifth time server, click Add Server to display up to four additional timer server fields.

9. Click Done.

1. On the Admin page in the Appliance Settings section, click Shutdown or Restart.
2. Select Restart for the component you want to restart:
   • System (can also be shutdown completely)
   • Admin
   • Receiver
   • Search

When you purchase a new protocol module, service, or feature, the updated license is automatically available on the ExtraHop system. However you must apply the updated license to the system through the Administration settings for the new changes to take effect.

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
2. In the Appliance Settings section, click License.
   A message appears about the availability of your new license.
   
   
3. Click Apply new license.
   The capture process restarts, which might take a few minutes.

   Note:

   If your license is not automatically updated, troubleshoot licensing server connectivity or contact ExtraHop Support.

If ExtraHop Support provides you with a license file, you can install this file on your appliance to update the license.

1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
2. In the Appliance Settings section, click License.
3. Click Manage License.
4. Click Update.
5. In the Enter License text box, enter the licensing information for the module.
   Paste the license text provided to you by ExtraHop Support. Be sure to include all of the text, including the BEGIN and END lines, as shown in the example below:

   -----BEGIN EXTRAHOP LICENSE-----
   serial=ABC123D;
   dossier=1234567890abcdef1234567890abcdef;
   mod_cifs=1;
   mod_nfs=1;
   mod_amf=0;
   live_capture=1;
   capture_upload=1;
   ...
   ssl_decryption=0;
   +++;
   ABCabcDE/FGHIjklm12nopqrstuvwXYZAB12345678abcde901abCD;
   12ABCDEFG1HIJklmnOP+1aA=;
   =abcd;
   -----END EXTRAHOP LICENSE-----

   Copy
6. Click Update.