Add your own identity provider to Reveal(x) 360

The Reveal(x) 360 system includes a default identity provider that enables you to manage your users who access the ExtraHop system. If your company already has an identity provider (IdP) that supports SAML 2.0, you can configure the IdP to manage your users on the ExtraHop system.

Before you begin

You must have an ExtraHop user account with System and Access Administration privileges to configure Reveal(x) 360.
Identity providers must meet the following criteria:
  • SAML 2.0
  • Support SP-initiated login flows. IdP-initiated login flows are not supported.
  • Support signed SAML Responses
  • Support HTTP-Redirect binding
Tip:These procedures require you to copy and paste information between the ExtraHop system and your IdP, so it is helpful to have each system open side-by-side.

Review Reveal(x) 360 access types and privilege levels

There are three types of access, each with their own privilege levels, that you can grant to your users in Reveal(x) 360: user privilege access, packets and session keys access, and detections access.

Familiarize yourself with the following access types and their associated privilege levels. You will map attribute names between both systems in the procedures in this guide.

See User privileges to learn what users can do in each privilege level in Reveal(x) 360.

User privilege access
Grants users read and write privileges throughout the system. There are 8 available privilege levels: system and access administration, system administration, full write, limited write, personal write, full read-only, restricted read-only, and none.
Packets and session keys access
Grants users the ability to view and download packet captures, with or without the ability to download session keys: No access, Packet slices only, Packets only, or Packets and session keys.
Detections access
Grants users the ability to view detections: No access or Full access.

If you only want to grant your users access to privilege levels for Full write and Full read-only, no packet access, and full detection access, create a worksheet similar to the following example:

Access Type Privilege Level Name in Reveal(x) 360 Attribute Value in your IdP
User privilege access Full write Full Write
User privilege access Full read-only Read-Only
Packets access No access None
Detections access Full access Full

Create an application in your IdP

  1. Log into Reveal(x) 360.
  2. Click System Settings at the top right of the page and then click All Administration.
  3. Click User Access.
  4. Note the Assertion Consumer Service (ACS) URL and Entity ID, which you will paste into your IdP configuration.
  5. Paste the ACS URL from Reveal(x) 360 into the ACS URL field on your IdP.
  6. Paste the SP Entity ID from Reveal(x) 360 into the SP Entity ID field on your IdP.

Next steps

Leave the IdP settings open and configure attribute mappings next.

Configure attributes that identify the user

You must configure attributes on your IdP that identify the user throughout the ExtraHop system by their first name, last name, and email address. Refer to your identity provider documentation for the correct property names when mapping these attributes or attribute statements.

Complete the following steps on your IdP.
  1. In the application attribute mapping section, add three attributes.
  2. In the first attribute, select email or similar. (For example, in Okta, this attribute is called user.email.)
  3. For the Service Provider, paste the following string: urn:oid:0.9.2342.19200300.100.1.3
  4. In the second attribute, select last name or similar. (For example, in Okta, this attribute is called user.lastName.)
  5. For the Service Provider, paste the following string: urn:oid:2.5.4.4
  6. In the third attribute, select first name or similar. (For example, in Okta, this attribute is called user.firstName.)
  7. For the Service Provider, paste the following string: urn:oid:2.5.4.42
In Okta for example, the attribute mapping section should look similar to the following:
Service Provider Attribute Name (Reveal(x) 360) Identity Provider Attribute Name (Okta)
urn:oid:0.9.2342.19200300.100.1.3 user.email
urn:oid:2.5.4.4 user.lastName
urn:oid:2.5.4.42 user.firstName

Configure attributes for system access

You must configure attributes on your identity provider to grant users access to the ExtraHop system. You can type any name for these attributes, but they must match what you configure later in Reveal(x) 360.

You must create at least one attribute for user privilege access. Packet and detection access is optional, but we recommend you create these attributes now.
Important:Attribute values must be less than 2,000 characters.
  1. In the application attribute mapping section, add three attributes.
  2. In the first attribute, select custom or similar and type a descriptive name for user privileges, such as writelevel.
  3. For the Service Provider, type a descriptive term to identify the attribute in Reveal(x) 360, such as write.
  4. In the second attribute, select custom or similar and type a descriptive name, such as packetslevel.
  5. For the Service Provider, type a descriptive term to identify the attribute in Reveal(x) 360, such as packets.
  6. In the third attribute, select custom or similar and type a descriptive name, such as detectionslevel.
  7. For the Service Provider, type a descriptive term to identify the attribute in Reveal(x) 360, such as detections.
  8. Save the settings and then export the application metadata XML file.
In Okta for example, the attribute mapping section should look similar to the following:
Service Provider Attribute Name (Reveal(x) 360) Identity Provider Attribute Name (IdP)
write writelevel
packets packetslevel
detections detectionslevel

Configure your identity provider information in Reveal(x) 360

Before you complete the following steps, make sure you have identified the privilege levels you want to grant for your users for each type of system access.
  1. In Reveal(x) 360, on the User Access page, click Add Identity Provider.
  2. In the Provider Name field, type a name to identify your specific identity provider. This name appears on the ExtraHop system log in page.
  3. Open the metadata file you exported in the previous procedure, and then copy and paste the contents into the Provider Metadata (XML) field.
  4. Scroll to the User Privilege Attributes section. There are three sections, one for each of the access types.
  5. In the Attribute Name field, type the name you configured on your IdP for user privilege access.
  6. In our example above, we specified write. In the Attribute Values fields, type the names of the privilege levels you identified for your users. In the figure below, we specified Full Write for the Full write privileges value.
    Important:You must specify the Attribute Name and configure at least one attribute value other than None to enable users to log in.


  7. Scroll to the Packets and Session Key Access section.
    Configuring packets and session key attributes is optional and is only required if you have a connected packetstore. If you do not have a packetstore, type NA in the Attribute Name field and leave the Attribute Value fields blank.
  8. In the Attribute Name field, type the name you configured on your IdP for packets access. In our example above, we specified packets.
  9. In the Attribute Values fields, type the names of the privilege levels you created for your users. In the figure below, we specified None.


  10. Scroll to the Detections Access section.
    Configuring detections attributes is optional. If you do not want users to have access to detections, type NA in the Attribute Name field and leave the Attribute Values fields blank.
  11. In the Attribute Name field, type the name you configured on your IdP for detections access. In our example above, we specified detections.
  12. In the Attribute Values fields, type the names of the privilege levels you created for your users. In the figure below, we specified Full.
  13. Click Save. It can take up to two minutes for the IdP configuration to be saved and enabled on the system.

Assign privileges to users in your IdP

You can now add system access attributes and their associated privilege levels to your existing users. You can assign multiple privileges to a user, but the user is always granted the highest privilege when they log in to the system.

Tip:The ExtraHop system supports group attribute statements to easily map user privileges to all members of a specific group. When you configure the ExtraHop application on your identity provider, specify a group attribute name. This name is then entered in the Attribute Name field when you configure the identity provider on the ExtraHop system.
  1. In your IdP, select the user you want to grant privileges to.
  2. Add an attribute for the type of access you previously defined, such as writelevel, packetslevel, or detectionslevel.
  3. In the same row, add the name you specified for the privilege level, such as Full Write.
The following figure shows an example of these attributes in JumpCloud:

View users in Reveal(x) 360

Users appear on the Users page in Reveal(x) 360 after they log in the first time. If a user does not appear in the table, they are not successfully being authenticated and authorized. Contact ExtraHop Support if you need assistance.

  1. Log in to Reveal(x) 360.
  2. Click System Settings at the top right of the page and then click All Administration.
  3. Click User Access. Users that successfully log in to the system appear in the table on the Users page in Reveal(x) 360. The table displays the name of the identity provider and the assigned privileges for each user.
  4. Click on a user name to see user details or to delete the user from the system.
    Important:When you delete a user, you must also revoke user access to the ExtraHop System through your IdP. Otherwise, the user might be able to log in again.
Last modified 2023-11-07