Deploy an ExtraHop packetstore in Azure

The following procedures explain how to deploy an ExtraHop virtual packetstore in a Microsoft Azure environment. You must have experience administering in an Azure environment to complete these procedures.

Before you begin

  • You must have experience deploying virtual machines in Azure within your virtual network infrastructure. To ensure that the deployment is successful, make sure you have access to, or the ability to create the required resources. You might need to work with other experts in your organization to ensure that the necessary resources are available.
  • You must have a Linux, Mac, or Windows client with the latest version of Azure CLI installed.
  • You must have the ExtraHop virtual hard disk (VHD) file, available on the ExtraHop Customer Portal. Extract the VHD file from the downloaded .zip archive file.
  • You must have an ExtraHop product key.

System requirements

The table below shows the environmental parameters that you need to configure, or might have already configured in your Azure environment to successfully deploy your ExtraHop virtual packetstore.

Parameter Description
Azure account Provides access to your Azure subscriptions.
Resource Group A container that holds related resources for the ExtraHop packetstore.
Location The geographic region where the Azure resources are located to sustain your virtual packetstore.
Storage account The Azure storage account contains all of your Azure Storage data objects, including blobs and disks.
Blob storage container The storage container where the ExtraHop packetstore image is stored as a blob.
Managed disk The disk required for ExtraHop packetstore data storage.
Network security group The network security group contains security rules that allow or deny inbound network traffic to, or outbound network traffic from the ExtraHop packetstore.
Azure VM instance size An Azure instance size that most closely matches the sensor VM size, as follows:

ETA 1150v: Standard_D4S_v3

Public or private IP address The IP address that enables access to the ExtraHop system.

Deploy the ETA 1150v

Before you begin

The procedures below assume that you do not have the required resource group, storage account, storage container, and network security group configured. If you already have these parameters configured, you can proceed to step 6 after you log in to your Azure account.
  1. Open a terminal application on your client and log in to your Azure account.
    az login
  2. Open https://aka.ms/devicelogin in a web browser and enter the code to authenticate, and then return to the command-line interface.
  3. Create a resource group.
    az group create --name <name> --location <location>

    For example, create a new resource group in the West US region.

    az group create --name exampleRG --location westus
  4. Create a storage account.
    az storage account create --resource-group <resource group name> --name <storage account name> 

    For example:

    az storage account create --resource-group exampleRG --name examplesa 
  5. View the storage account key. The value for key1 is required for step 6.
    az storage account keys list --resource-group <resource group name> --account-name <storage account name>

    For example:

    az storage account keys list --resource-group exampleRG --account-name examplesa

    Output similar to the following appears:

    [ 
     {
       "keyName": "key1",
       "permissions": "Full",
       "value": "CORuU8mTcxLxq0bbszhZ4RKTB93CqLpjZdAhCrNJugAorAyvJjhGmBSedjYPmnzXPikSRigd
    5T5/YGYBoIzxNg=="
     },
     { "keyName": "key2",
       "permissions": "Full",
       "value": "DOlda4+6U3Cf5TUAng8/GKotfX1HHJuc3yljAlU+aktRAf4/KwVQUuAUnhdrw2yg5Pba5FpZn6oZYvROncnT8Q=="
     }
    ]
  6. Set default Azure storage account environment variables. You can have multiple storage accounts in your Azure subscription. To select one account to apply to all subsequent storage commands, set these environment variables. If you do not set environment variables you will always have to specify --account-name and --account-key in the commands in the rest of this procedure.

    PowerShell

    $Env:AZURE_STORAGE_ACCOUNT = <storage account name>
    
    $Env:AZURE_STORAGE_KEY = <key1>

    Where <key1> is the storage account key value that appears in step 5.

    For example:

    $Env:AZURE_STORAGE_ACCOUNT = examplesa
    $Env:AZURE_STORAGE_KEY=CORuU8mTcxLxq0bbszhZ4RKTB93CqLpjZdAhCrNJugAor
    AyvJjhGmBSedjYPmnzXPikSRigd5T5/YGYBoIzxNg==
    
    Tip:
    • Set environment variables in the Windows command interpreter (cmd.exe) with the following syntax:
      set <variable name>=<string>
    • Set environment variables in the Linux command-line interface with the following syntax:
      export <variable name>=<string>
  7. Create a storage container.
    az storage container create --name <storage container name>

    For example:

    az storage container create --name examplesc
  8. Upload the ExtraHop VHD file to the blob storage.
     az storage blob upload --container-name <container> --type page --name <blob name> --file <path/to/file> --validate-content 
    

    For example:

    az storage blob upload --container-name examplesc --type page
    --name extrahop.vhd --file /Users/admin/Downloads/extrahop-eta-azure-7.2.0.5000.vhd --validate-content
  9. Retrieve the blob URI. You will need the URI when you create the managed disk in the next step.
    az storage blob url --container-name <storage container name> --name <blob name>

    For example:

    az storage blob url --container-name examplesc --name extrahop.vhd

    Output similar to the following example appears:

    https://examplesa.blob.core.windows.net/examplesc/extrahop.vhd
  10. Create a managed disk, sourcing the ExtraHop VHD file.
    az disk create --resource-group <resource group name> --location <Azure region> 
    --name <disk name> --sku <storage SKU> --source <blob uri> --size-gb <size gb>

    Where storage SKU specifies the type of disk and desired replication pattern. For example, Premium_LRS, StandardSSD_LRS, or Standard_LRS.

    You can configure the disk size (--size-gb) between 50 GB and 2 TB

    For example:
    az disk create --resource-group exampleRG --location westus 
    --name exampleDisk --sku Premium_LRS --source https://examplesa.blob.core.windows.net/examplesc/extrahop.vhd 
    --size-gb 60
  11. Create the VM and attach the managed disk. This command creates the packetstore VM with a default network security group and private IP address.
    az vm create --resource-group <resource group name> --public-ip-address "" 
    --location <Azure region> --name <vm name> --os-type linux --attach-os-disk <disk name> 
    --size <azure machine size>

    For example:

    az vm create --resource-group exampleRG --public-ip-address "" 
    --location westus --name exampleVM --os-type linux 
    --attach-os-disk exampleDisk --size Standard_D4S_v3
  12. Log in to the Azure portal through https://portal.azure.com and configure the networking rules for the packetstore. The network security group must have the following rules configured:
    Table 1. Inbound Port Rules
    Name Port Protocol
    HTTPS 443 TCP
    RPCAP 2003 TCP
    RPCAP 2003-2034 UDP
    SSH 22 TCP
    Table 2. Outbound Port Rules
    Name Port Protocol
    DNS 53 UDP
    HTTPS 443 TCP
    RPCAP 2003 TCP
    SSH 22 TCP

Next steps

Open a web browser and log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin. The default login name is setup and the password is default.

Register your ExtraHop system and complete the recommended procedures in the post-deployment checklist.

Last modified 2024-03-27