Start Demo

Track a detection

Detection tracking enables you to assign users, set a status, and add notes to a detection card.

You can also filter your view of detections by specific status or assignee.
Video:See the related training: Detection Tracking

Before you begin

Users must have limited write privileges or higher to complete the tasks in this guide.
You can change the assignee to any user in the system, add notes, and set the status on a detection to one of the following:
Open
The detection has not been reviewed.
Acknowledge
The detection has been seen and should be prioritized for follow-up.
In Progress
The detection has been assigned to a team member and is being reviewed.
Closed - Action Taken
The detection was reviewed and action was taken to address the potential risk.
Closed - No Action Taken
The detection was reviewed and required no action.


Here are important considerations about tracking detections:

  • The Acknowledged or Closed status does not hide the detection.
  • The detection status can be updated by any privileged user.
  • You can add detection tracking with ExtraHop and third-party systems in the Administration settings.

To track a detection, complete the following steps:

  1. Log in to the ExtraHop system through https://<extrahop-hostname-or-IP-address>.
  2. At the top of the page, click Detections.
  3. Click Actions from the lower-left corner of the detection card.
  4. (Optional): Click a detection status to add it to the detection.
    Option Description
    Acknowledge The detection has been seen and should be prioritized for follow-up.
    In Progress The detection has been assigned to a team member and is being reviewed.
    Closed - Action Taken The detection was reviewed and action was taken to address the potential risk.
    Closed - No Action Taken The detection was reviewed and required no action.


  5. Click Track Detection… to set the detection status, assign the detection to a user, and add notes to the detection card.


    From the Actions dropdown, select Track Detection... and then Open to remove the status from the detection; the assignee and notes remain visible.

Track a detection from a detection card

You can track a detection by adding an assignee, status, and notes from a detection card.

To track a detection, complete the following steps:

  1. Log in to the ExtraHop system through https://<extrahop-hostname-or-IP-address>.
  2. At the top of the page, click Detections.
  3. Click Actions from the lower-left corner of the detection card.
  4. (Optional): Click a detection status to add it to the detection.
  5. Click Track Detection… to set the detection status, assign the detection to a user, and add notes to the detection card.

    From the Actions dropdown, select Track Detection... and then Open to remove the status from the detection; the assignee and notes remain visible.

Track a group of detections from a detection summary

You can apply a status, assignee, or note to multiple detections at the same time from a summary panel on the Detections page.

A summary panel appears when detections are grouped by Type in Summary view on the Detections page.

To track a group of detections from a detection summary, complete the following steps:

  1. Log in to the ExtraHop system through https://<extrahop-hostname-or-IP-address>.
  2. At the top of the page, click Detections.
    By default, the page should be in Summary view with detections grouped by Type. If they are not, click the Summary view and then group by Type.
  3. Click a detection type in your detections list.
  4. Click the criteria you want to filter by: participants, properties, or network localities.
  5. In the lower left corner of the summary panel click Track All Detections.
    The link will include how many detections you are updating. For example, Track All 14 Detections. This link does not appear on the summary panel if the Hidden status filter is applied.
  6. (Optional): Select the status you want to apply to all selected detections.
  7. (Optional): Select the assignee you want to apply to all selected detections.
  8. (Optional): Select whether you want to add a new note to the existing notes of the selected detections, or overwrite all existing notes.
    When adding your note to existing notes, the new note is added above existing notes.
  9. Click Save.
Last modified 2024-04-13