Connect the console and sensors to ExtraHop recordstores

After you deploy an ExtraHop recordstore, you must establish a connection from all ExtraHop sensors and the console to the recordstore nodes before you can query for stored records.

1. Log in to the Administration settings on the console or sensor.

   Note:

   If the recordstore connections are managed from a console, you must perform this procedure from the console instead of from each sensor.

2. In the ExtraHop Recordstore Settings section, click Connect Recordstores.
3. Click Add New.
4. In the Node 1 field, type the hostname or IP address of any recordstore in the recordstore cluster.

   Note:

   If the cluster also contains manager-only nodes, add only the data-only nodes.

5. For each additional recordstore node in the cluster, click Add New and enter the individual hostname or IP address in the corresponding Node field.
   
   
   
6. Click Save.
7. Confirm that the fingerprint on this page matches the fingerprint of Node 1 of the cluster.
8. In the Recordstore Setup Password field, type the password for the Node 1 setup user account.
9. Click Connect.
10. When the cluster settings are saved, click Done.