ExtraHop REST API Guide
Introduction to the ExtraHop REST API
The ExtraHop REST API enables you to automate administration and configuration tasks on your ExtraHop system. You can send requests to the ExtraHop API through a Representational State Transfer (REST) interface, which is accessed through resource URIs and standard HTTP methods.
Video: | See the related training: Rest API Overview |
Each ExtraHop system provides access to the built-in ExtraHop REST API Explorer, which enables you to view all of the available system resources, methods, properties, and parameters. The REST API Explorer also enables you to send API calls directly to your ExtraHop system.
Note: | This guide is intended for an audience that has a basic familiarity with software development and the ExtraHop system. |
ExtraHop API requirements
Before you can begin writing scripts for the ExtraHop REST API or performing operations through the REST API Explorer, you must meet the following requirements:
- Your ExtraHop system must be configured to allow API key generation for the type of user you are (remote or local).
- You must generate a valid API key.
- You must have a user account on the ExtraHop system with appropriate privileges set for the type of tasks you want to perform.
Access and authenticate to the ExtraHop REST API
Setup users and users with system and access administration privileges control whether users can generate API keys. For example, you can prevent remote users from generating keys or you can disable API key generation entirely. When this functionality is enabled, API keys are generated by users and can be viewed only by the user who generated the key.
Note: | Administrators set up user accounts and assign privileges, but then users generate their own API keys. Users can delete API keys for their own account, and users with system and access administration privileges can delete API keys for any user. For more information, see Users and user groups. |
After you generate an API key, you must append the key to your request headers. The following example shows a request that retrieves metadata about the firmware running on the ExtraHop system:
curl -i -X GET --header "Accept: application/json" \ --header "Authorization: ExtraHop apikey=2bc07e55971d4c9a88d0bb4d29ecbb29" \ "https://<hostname-or-IP-of-your-ExtraHop-system>/api/v1/extrahop"
Privilege levels
User privilege levels determine which ExtraHop system and administration tasks the user can perform through the ExtraHop REST API.
You can view the privilege levels for users through the granted_roles and effective_roles properties. The granted_roles property shows you which privilege levels are explicitly granted to the user. The effective_roles property shows you all privilege levels for a user, including those received outside of the granted role, such as through a user group.
The granted_roles and effective_roles properties are returned by the following operations:
- GET /users
- GET /users/{username}
The granted_roles and effective_roles properties support the following privilege levels. Note that the type of tasks for each ExtraHop system vary by the available resources listed in the REST API Explorer and depend on the modules enabled on the system and user module access privileges.
Privilege level | Actions allowed |
---|---|
"system": "full" |
|
"write": "full" |
|
"write": "limited" |
|
"write": "personal" |
|
"metrics": "full" |
|
"metrics": "restricted" |
|
"ndr": "full" |
This is a module access privilege that can be granted to a user in addition to one of the following system access privilege levels:
|
"ndr": "none" |
This is a module access privilege that can be granted to a user in addition to one of the following system access privilege levels:
|
"npm": "full" |
This is a module access privilege that can be granted to a user in addition to one of the following system access privilege levels:
|
"npm": "none" |
This is a module access privilege that can be granted to a user in addition to one of the following system access privilege levels:
|
"packets": "full" |
This is an add-on privilege that can be granted to a user with one of the following privilege levels:
|
"packets": "full_with_keys" |
This is an add-on privilege that can be granted to a user with one of the following privilege levels:
|
"packets": "slices_only" |
This is an add-on privilege that can be granted to a user with one of the following privilege levels:
|
Manage API key access
Users with system and access administration privileges can configure whether users can generate API keys for the ExtraHop system. You can allow only local users to generate keys, or you can also disable API key generation entirely.
- Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
- In the Access Settings section, click API Access.
-
In the Manage API Access section, select one of the
following options:
- Allow all users to generate an API key: Local and remote users can generate API keys.
- Only local users can generate an API key: Remote users cannot generate API keys.
- No users can generate an API key: No API keys can be generated by any user.
- Click Save Settings.
Generate an API key
You must generate an API key before you can perform operations through the ExtraHop REST API. Keys can be viewed only by the user who generated the key or by users with system and access administration privileges. After you generate an API key, add the key to your request headers or the ExtraHop REST API Explorer.
Before you begin
Make sure the ExtraHop system is configured to allow API key generation.- In the Access Settings section, click API Access.
- In the Generate an API Key section, type a description for the new key, and then click Generate.
- Scroll down to the API Keys section and copy the API key that matches your description.
Configure cross-origin resource sharing (CORS)
Cross-origin resource sharing (CORS) allows you to access the ExtraHop REST API across domain-boundaries and from specified web pages without requiring the request to travel through a proxy server.
- Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
- In the Access Settings section, click API Access.
-
In the CORS Settings section, specify one of the following
access configurations.
- To add a specific URL, type an origin URL in the text box, and then
click the plus (+) icon or press ENTER.
The URL must include a scheme, such as HTTP or HTTPS, and the exact domain name. You cannot append a path; however, you can provide a port number.
- To allow access from any URL, select the Allow API requests
from any Origin checkbox.
Note: Allowing REST API access from any origin is less secure than providing a list of explicit origins.
- To add a specific URL, type an origin URL in the text box, and then
click the plus (+) icon or press ENTER.
- Click Save Settings and then click Done.
Set up an TLS certificate
Before making requests to an ExtraHop system with a self-signed certificate, you must set up an TLS certificate for each user who will access the ExtraHop system from a particular computer.
In each of the following examples, replace {HOST} with the hostname of your ExtraHop system.
Note: | The TLS certificate applies only to the user performing the command. Each user must run the command with their login credentials to set up the TLS certificate. |
Learn about the REST API Explorer
The REST API Explorer is a web-based tool that enables you to view detailed information about the ExtraHop REST API resources, methods, parameters, properties, and error codes. Code samples are available in Python, cURL, and Ruby for each resource. You also can perform operations directly through the tool.
Open the REST API Explorer
You can open the REST API Explorer from the Administration settings or through the following URL:
https://<extrahop-hostname-or-ip-address>/api/v1/explore/
View operation information
From the REST API Explorer, you can click any operation to view configuration information for the resource.
The following table provides information about the sections available for resources in the REST API Explorer. Section availability varies by HTTP method. Not all methods have all of the sections listed in the table.
Section | Description | ||
---|---|---|---|
Body Parameters | Provides all of the fields for the request body and supported values for each field. | ||
Parameters | Provides information about the available query parameters. | ||
Responses | Provides information about the possible HTTP status
codes for the resource. If you click Send Request, this
section also includes the response from the server and the cURL, Python, and Ruby
syntax required to send the specified request.
|
Identify objects on the ExtraHop system
To perform API operations on a specific object, you must locate the object ID. You can easily locate the object ID through the following methods in the REST API Explorer.
- The object ID is provided in the headers returned from a POST request. For example, if you
send a POST request to create a page, the response headers display a location URL.
The following request returned the location for the newly created tag as /api/v1/tags/1 and the ID for the tag as 1.
{ "date": "Tue, 09 Nov 2021 18:21:00 GMT ", "via": "1.1 localhost", "server": "Apache", "content-type": "text/plain; charset=utf-8", "location": "/api/v1/tags/1", "cache-control": "private, max-age=0", "connection": "Keep-Alive", "keep-alive": "timeout=90, max=100", "content-length": "0" }
- The object ID is provided for all objects returned from a GET request. For example, if you
perform a GET request on all devices, the response body contains information for
each device, including the ID.
The following response body displays an entry for a single device, with an ID of 10212:
{ "mod_time": 1448474346504, "node_id": null, "id": 10212, "extrahop_id": "test0001", "description": null, "user_mod_time": 1448474253809, "discover_time": 1448474250000, "vlanid": 0, "parent_id": 9352, "macaddr": "00:05:G3:FF:FC:28", "vendor": "Cisco", "is_l3": true, "ipaddr4": "10.10.10.5", "ipaddr6": null, "device_class": "node", "default_name": "Cisco5", "custom_name": null, "cdp_name": "", "dhcp_name": "", "netbios_name": "", "dns_name": "", "custom_type": "", "analysis_level": 1 },
ExtraHop API resources
You can perform operations on the following resources through the ExtraHop REST API. You also can view more detailed information about these resources, such as available HTTP methods, query parameters, and object properties in the REST API Explorer.
Activity Map
An activity map is a dynamic visual representation of the L4-L7 protocol activity between devices in your network. Create a 2D or 3D layout of device connections in real-time to learn about the traffic flow and relationships between devices.
Here are some important considerations about activity maps:
- You can only create activity maps for devices in Standard Analysis and Advanced Analysis. Discovery Mode devices are not included in activity maps. For more information, see Analysis levels.
- If you create an activity map for a device, activity group, or device group with no protocol activity in the selected time interval, the map appears without any data. Change the time interval or your origin selection and try again.
- You can create an activity map in a console to view device connections across all of your sensors.
To learn about configuring and navigating activity maps, see Activity maps.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /activitymaps | Retrieve all activity maps. |
POST /activitymaps | Create a new activity map. |
POST /activitymaps/query | Perform a network topology query, which returns activity map data in flat file content. |
DELETE /activitymaps/{id} | Delete a specific activity map. |
GET /activitymaps/{id} | Retrieve a specific activity map. |
PATCH /activitymaps/{id} | Update a specific activity map. |
POST /activitymaps/{id}/query | Perform a topology query for a specific activity map, which returns activity map data in flat file content. |
GET /activitymaps/{id}/sharing | Retrieve the users and their sharing permissions for a specific activity map. |
PATCH /activitymaps/{id}/sharing | Update the users and their sharing permissions for a specific activity map. |
PUT /activitymaps/{id}/sharing | Replace the users and their sharing permissions for a specific activity map. |
Operation details
POST /activitymaps
Specify the following parameters.
- body: Object
- The activity map properties.
- name: String
- The friendly name for the activity map.
- short_code: String
- (Optional) The unique short code that is global to all activity maps.
- description: String
- The description for the activity map.
- weighting: String
- (Optional) The metric value that determines how activity is weighted between devices. Supported element values are "bytes", "connections", and "turns".
- mode: String
- (Optional) The layout of the activity map. Supported values are "2dforce" and "3dforce".
- show_alert_status: Boolean
- (Optional) Indicates whether to show the alert status for devices on the activity map. If enabled, the color of each device on the map represents the most severe alert level associated with the device.
- walks: Array of Objects
- The list of one or more walk objects. A walk is the path of traffic composed of one or more steps. Each walk begins with one or more origin devices and expands to connections to peer devices that are based on protocol activity. Each expansion from the origin is a step. The contents of the object are defined in the "walk" section below.
- origins: Array of Objects
- The list of one or more origin devices of the first step within the walk. Object contents are defined in the "source_object" section below.
- object_type: String
- The metric source type.
The following values are valid:
- device
- device_group
- object_id: Number
- The unique identifier for the source object.
- steps: Array of Objects
- The list of one or more steps within the walk. Each step is defined by the protocol activity between devices of the previous step to a new set of peer devices. Object contents are defined in the "step" section below.
- relationships: Array of Objects
- (Optional) The list of one or more filters that define the relationship between two devices. The filters specify which roles and protocols to search for when locating peer devices in the step. Relationships are represented as an edge in the activity map. Object contents are defined in the "relationship" section below. If no value is specified, the operation will locate all peers.
- protocol: String
- (Optional) The metric protocol associated with the relationship, such as "HTTP" or "DNS". The operation only locates connections between devices over the specified protocol.
- role: String
- (Optional) The device role associated with the metric protocol of the relationship. The operation only locates connections between devices over the associated protocol in the specified role. Supported role values are "client", "server", or "any". Set to "any" to locate all client, server, and peer device relationships associated with the specified protocol.
- peer_in: Array of Objects
- (Optional) The list of one or more peer device objects to include in the activity map. Only relationships to peers of the specified source object are included. Object contents are defined in the "source_object" section below.
- object_type: String
- The metric source type.
The following values are valid:
- device
- device_group
- object_id: Number
- The unique identifier for the source object.
- peer_not_in: Array of Objects
- (Optional) The list of one or more peer device objects to exclude from the activity map. Relationships to peers of the specified source object are excluded. Object contents are defined in the "source_object" section below.
- object_type: String
- The metric source type.
The following values are valid:
- device
- device_group
- object_id: Number
- The unique identifier for the source object.
Specify the body parameter in the following JSON format.
{ "description": "string", "mode": "string", "name": "string", "short_code": "string", "show_alert_status": true, "walks": { "origins": { "object_type": "string", "object_id": 0 }, "steps": { "relationships": { "protocol": "string", "role": "string" }, "peer_in": { "object_type": "string", "object_id": 0 }, "peer_not_in": { "object_type": "string", "object_id": 0 } } }, "weighting": "string" }
POST /activitymaps/query
Specify the following parameters.
- body: Object
- The topology query properties.
- from: Number
- The beginning timestamp of the time range the query will search, expressed in milliseconds since the epoch.
- until: Number
- (Optional) The ending timestamp of the time range the query will search, expressed in milliseconds since the epoch. If no value is set, the query end defaults to "now".
- weighting: String
- (Optional) The metric value that determines how activity is weighted between devices.
The following values are valid:
- bytes
- connections
- turns
- edge_annotations: Array of Strings
- (Optional) The list of one or more edge annotations to include in the topology query.
The following values are valid:
- protocols
- appearances
- walks: Array of Objects
- The list of one or more walk objects to include in the topology query. A walk is the path of traffic composed of one or more steps. Each walk begins with one or more origin devices and expands to connections to peer devices that are based on protocol activity. Each expansion from the origin is a step. Object contents are defined in the "topology_walk" section below.
- origins: Array of Objects
- The list of one or more origin devices of the first step within the walk. Object contents are defined in the "topology_source" section below.
- object_type: String
- The type of source object.
The following values are valid:
- all_devices
- device_group
- device
- object_id: Number
- The unique identifier for the source object. Set to 0 if the value of the "object_type" parameter is "all_devices".
- steps: Array of Objects
- The list of one or more steps within the walk. Each step is defined by the protocol activity between devices of the previous step to a new set of peer devices. Object coontents are defined in the "topology_step" section below.
- relationships: Array of Objects
- (Optional) The list of one or more filters that define the relationship between two devices. The filters specify which roles and protocols to search for when locating peer devices in the step. Relationships are represented as an edge in the activity map. If no value is set, the operation includes all peers. Object contents are defined in the "topology_relationship" section below.
- role: String
- (Optional) The role of the peer device in relation to the origin device.
The following values are valid:
- client
- server
- any
- protocol: String
- (Optional) The protocol over which the origin device is communicating, such as "HTTP". If no value is set, the object includes any protocol.
- peer_in: Array of Objects
- (Optional) The list of one or more peer devices to include in the topology graph. Only relationships to peers of the specified source object are included. Object contents are defined in the "topology_source" section below.
- object_type: String
- The type of source object.
The following values are valid:
- all_devices
- device_group
- device
- object_id: Number
- The unique identifier for the source object. Set to 0 if the value of the "object_type" parameter is "all_devices".
- peer_not_in: Array of Objects
- (Optional) The list of one or more peer devices to exclude from the topology graph. Relationships to peer devices of the specified source object are excluded. Object contents are defined in the "topology_source" section below.
- object_type: String
- The type of source object.
The following values are valid:
- all_devices
- device_group
- device
- object_id: Number
- The unique identifier for the source object. Set to 0 if the value of the "object_type" parameter is "all_devices".
Specify the body parameter in the following JSON format.
{ "edge_annotations": [], "from": 0, "until": 0, "walks": { "origins": { "object_type": "string", "object_id": 0 }, "steps": { "relationships": { "role": "string", "protocol": "string" }, "peer_in": { "object_type": "string", "object_id": 0 }, "peer_not_in": { "object_type": "string", "object_id": 0 } } }, "weighting": "string" }
GET /activitymaps
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "description": "string", "id": 0, "mod_time": 0, "mode": "string", "name": "string", "owner": "string", "rights": [ "string" ], "short_code": "string", "show_alert_status": true, "walks": [], "weighting": "string" }
GET /activitymaps/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the activity map.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "description": "string", "id": 0, "mod_time": 0, "mode": "string", "name": "string", "owner": "string", "rights": [ "string" ], "short_code": "string", "show_alert_status": true, "walks": [], "weighting": "string" }
POST /activitymaps/{id}/query
Specify the following parameters.
- id: Number
- The unique identifier for the activity map.
- body: Object
- The topology query properties.
- from: Number
- The beginning timestamp of the time range the query will search, expressed in milliseconds since the epoch.
- until: Number
- (Optional) The ending timestamp of the time range the query will search, expressed in milliseconds since the epoch. If no value is set, the query end defaults to "now".
- edge_annotations: Array of Strings
- (Optional) The list of one or more edge annotations to include in the topology query.
The following values are valid:
- protocols
- appearances
Specify the body parameter in the following JSON format.
{ "edge_annotations": [], "from": 0, "until": 0 }
DELETE /activitymaps/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the activity map.
PATCH /activitymaps/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the activity map.
- body: Object
- The activity map properties to update.
GET /activitymaps/{id}/sharing
Specify the following parameters.
- id: Number
- The unique identifier for the activity map.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "anyone": "string", "groups": {}, "users": {} }
Alert
Alerts are system notifications that are generated upon specified alert criteria. Default alerts are available in the system, or you can create a custom alert.
Note: | Machine learning detections require a connection to ExtraHop Cloud Services. |
The following table displays all of the operations you can perform this resource:
Operation | Description |
---|---|
GET /alerts | Retrieve all alerts. |
POST /alerts | Create a new alert with specified values. |
DELETE /alerts/{id} | Delete a specific alert. |
GET /alerts/{id} | Retrieve a specific alert. |
PATCH /alerts/{id} | Apply updates to a specific alert. |
GET /alerts/{id}/applications | Retrieve all applications that have a specific alert assigned. |
POST /alerts/{id}/applications | Assign and unassign a specific alert to applications. |
DELETE /alerts/{id}/applications/{child-id} | Unassign an application from a specific alert. |
POST /alerts/{id}/applications/{child-id} | Assign an application to a specific alert. |
GET /alerts/{id}/devicegroups | Retrieve all device groups that have a specific alert assigned. |
POST /alerts/{id}/devicegroups | Assign and unassign a specific alert to device groups. |
DELETE /alerts/{id}/devicegroups/{child-id} | Unassign a device group from a specific alert. |
POST /alerts/{id}/devicegroups/{child-id} | Assign a device group to a specific alert. |
GET /alerts/{id}/devices | Retrieve all devices that have a specific alert assigned. |
POST /alerts/{id}/devices | Assign and unassign a specific alert to devices. |
DELETE /alerts/{id}/devices/{child-id} | Unassign a device from a specific alert. |
POST /alerts/{id}/devices/{child-id} | Assign a device to a specific alert. |
GET /alerts/{id}/emailgroups | Retrieve all email groups that have a specific alert assigned. |
POST /alerts/{id}/emailgroups | Assign and unassign a specific alert to email groups. |
DELETE /alerts/{id}/emailgroups/{child-id} | Unassign a email group from a specific alert. |
POST /alerts/{id}/emailgroups/{child-id} | Assign a email group to a specific alert. |
GET /alerts/{id}/exclusionintervals | Retrieve all exclustion intervals that have a specific alert assigned. |
POST /alerts/{id}/exclusionintervals | Assign and unassign a specific alert to exclustion intervals. |
DELETE /alerts/{id}/exclusionintervals/{child-id} | Unassign an exclusion interval from a specific alert. |
POST /alerts/{id}/exclusionintervals/{child-id} | Assign an exclusion interval to a specific alert. |
GET /alerts/{id}/networks | Retrieve all networks that have a specific alert assigned. |
POST /alerts/{id}/networks | Assign and unassign a specific alert to networks. |
DELETE /alerts/{id}/networks/{child-id} | Unassign a network from a specific alert. |
POST /alerts/{id}/networks/{child-id} | Assign a network to a specific alert. |
GET /alerts/{id}/stats | Retrieve all additional statistics for a specific alert. |
Operation details
GET /alerts
If the request is successful, the ExtraHop system returns an object in the following format.
{ "apply_all": true, "author": "string", "categories": [ "string" ], "cc": [], "description": "string", "disabled": true, "field_name": "string", "field_name2": "string", "field_op": "string", "id": 0, "interval_length": 0, "mod_time": 0, "name": "string", "notify_snmp": true, "object_type": "string", "operand": "string", "operator": "string", "param": {}, "param2": {}, "protocols": [ "string" ], "refire_interval": 0, "severity": 0, "stat_name": "string", "type": "string", "units": "string" }
POST /alerts
Specify the following parameters.
- body: Object
- Apply the specified property values to the new alert.
- description: String
- An optional description for the alert.
- notify_snmp: Boolean
- (Optional) Indicates whether to send an SNMP trap when an alert is generated.
- field_op: String
- The type of comparison between the field_name and field_name2 fields when applying a ratio. Only applicable to threshold alerts.
The following values are valid:
- /
- null
- stat_name: String
- The statistic name for the alert. Only applicable to threshold alerts.
- disabled: Boolean
- (Optional) Indicates whether the alert is disabled.
- operator: String
- The logical operator applied when comparing the value of the operand field to alert conditions. Only applicable to threshold alerts.
The following values are valid:
- ==
- >
- <
- >=
- <=
- operand: String
- The value to compare against alert conditions. The compare method is specified by the value of the operator field. Only applicable to threshold alerts.
- field_name: String
- The name of the monitored metric. Only applicable to threshold alerts.
- name: String
- The unique, friendly name for the alert.
- cc: Array of Strings
- The list of email addresses, not included in an email group, to receive notifications.
- apply_all: Boolean
- Indicates whether the alert is assigned to all available data sources.
- severity: Number
- (Optional) The severity level of the alert, which is displayed in the Alert History, email notifications, and SNMP traps. Severity levels 0-2 require immediate attention. Severity levels are described in the REST API Guide.
The following values are valid:
- 0
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- author: String
- The name of the user that created the alert.
- param: Object
- The first alert parameter, which is either a key pattern or a data point. Only applicable to threshold alerts.
- interval_length: Number
- The length of the alert interval, expressed in seconds. Only applicable to threshold alerts.
The following values are valid:
- 30
- 60
- 120
- 300
- 600
- 900
- 1200
- 1800
- param2: Object
- The second alert parameter, which is either a key pattern or a data point. Only applicable to threshold alerts.
- units: String
- The interval in which to evaluate the alert condition. Only applicable to threshold alerts.
The following values are valid:
- none
- period
- 1 sec
- 1 min
- 1 hr
- field_name2: String
- The second monitored metric when applying a ratio. Only applicable to threshold alerts.
- refire_interval: Number
- (Optional) The time interval in which alert conditions are monitored, expressed in seconds.
The following values are valid:
- 300
- 600
- 900
- 1800
- 3600
- 7200
- 14400
- type: String
- The type of alert.
The following values are valid:
- threshold
- object_type: String
- The type of metric source monitored by the alert configuration. Only applicable to detection alerts.
The following values are valid:
- application
- device
- protocols: Array of Strings
- (Optional) The list of monitored protocols. Only applicable to detection alerts.
- categories: Array of Strings
- (Optional) The list of one or more detection categories. An alert is generated only if a detection is identified in the specified categories. Only applicable to detection alerts.
Specify the body parameter in the following JSON format.
{ "apply_all": true, "author": "string", "categories": [ "string" ], "cc": [], "description": "string", "disabled": true, "field_name": "string", "field_name2": "string", "field_op": "string", "interval_length": 0, "name": "string", "notify_snmp": true, "object_type": "string", "operand": "string", "operator": "string", "param": {}, "param2": {}, "protocols": [ "string" ], "refire_interval": 0, "severity": 0, "stat_name": "string", "type": "string", "units": "string" }
GET /alerts/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the alert.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "apply_all": true, "author": "string", "categories": [ "string" ], "cc": [], "description": "string", "disabled": true, "field_name": "string", "field_name2": "string", "field_op": "string", "id": 0, "interval_length": 0, "mod_time": 0, "name": "string", "notify_snmp": true, "object_type": "string", "operand": "string", "operator": "string", "param": {}, "param2": {}, "protocols": [ "string" ], "refire_interval": 0, "severity": 0, "stat_name": "string", "type": "string", "units": "string" }
DELETE /alerts/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the alert.
PATCH /alerts/{id}
Specify the following parameters.
- body: Object
- Apply the specified property value updates to the alert.
- id: Number
- The unique identifier for the alert.
GET /alerts/{id}/stats
Specify the following parameters.
- id: Number
- The unique identifier for the alert.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "alert_id": 0, "field_name": "string", "id": 0, "param": "string", "stat_name": "string" }
GET /alerts/{id}/devicegroups
Specify the following parameters.
- id: Number
- The unique identifier for the alert.
POST /alerts/{id}/devicegroups
Specify the following parameters.
- body: Object
- The list of unique identifiers for device groups that is assigned and unassigned to the alert.
- assign: Array of Numbers
- IDs of resources to assign
- unassign: Array of Numbers
- IDs of resources to unassign
Specify the body parameter in the following JSON format.
{ "assign": [], "unassign": [] }
- id: Number
- The unique identifier for the alert.
POST /alerts/{id}/devicegroups/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the device group.
- id: Number
- The unique identifier for the alert.
DELETE /alerts/{id}/devicegroups/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the device group.
- id: Number
- The unique identifier for the alert.
GET /alerts/{id}/emailgroups
Specify the following parameters.
- id: Number
- The unique identifier for the alert.
POST /alerts/{id}/emailgroups
Specify the following parameters.
- body: Object
- The list of unique identifiers for email groups that is assigned and unassigned to the alert.
- assign: Array of Numbers
- IDs of resources to assign
- unassign: Array of Numbers
- IDs of resources to unassign
Specify the body parameter in the following JSON format.
{ "assign": [], "unassign": [] }
- id: Number
- The unique identifier for the alert.
POST /alerts/{id}/emailgroups/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the email group.
- id: Number
- The unique identifier for the alert.
DELETE /alerts/{id}/emailgroups/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the email group.
- id: Number
- The unique identifier for the alert.
GET /alerts/{id}/exclusionintervals
Specify the following parameters.
- id: Number
- The unique identifier for the alert.
POST /alerts/{id}/exclusionintervals
Specify the following parameters.
- body: Object
- The list of unique identifiers for exclusion intervals that is assigned and unassigned to the alert.
- assign: Array of Numbers
- IDs of resources to assign
- unassign: Array of Numbers
- IDs of resources to unassign
Specify the body parameter in the following JSON format.
{ "assign": [], "unassign": [] }
- id: Number
- The unique identifier for the alert.
POST /alerts/{id}/exclusionintervals/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the exclusion interval.
- id: Number
- The unique identifier for the alert.
DELETE /alerts/{id}/exclusionintervals/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the exclusion interval.
- id: Number
- The unique identifier for the alert.
GET /alerts/{id}/devices
Specify the following parameters.
- id: Number
- The unique identifier for the alert.
POST /alerts/{id}/devices
Specify the following parameters.
- body: Object
- The list of unique identifiers for devices that is assigned and unassigned to the alert.
- assign: Array of Numbers
- IDs of resources to assign
- unassign: Array of Numbers
- IDs of resources to unassign
Specify the body parameter in the following JSON format.
{ "assign": [], "unassign": [] }
- id: Number
- The unique identifier for the alert.
POST /alerts/{id}/devices/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the device.
- id: Number
- The unique identifier for the alert.
DELETE /alerts/{id}/devices/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the device.
- id: Number
- The unique identifier for the alert.
GET /alerts/{id}/networks
Specify the following parameters.
- id: Number
- The unique identifier for the alert.
POST /alerts/{id}/networks
Specify the following parameters.
- body: Object
- The list of unique identifiers for networks that is assigned and unassigned to the alert.
- assign: Array of Numbers
- IDs of resources to assign
- unassign: Array of Numbers
- IDs of resources to unassign
Specify the body parameter in the following JSON format.
{ "assign": [], "unassign": [] }
- id: Number
- The unique identifier for the alert.
POST /alerts/{id}/networks/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the network.
- id: Number
- The unique identifier for the alert.
DELETE /alerts/{id}/networks/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the network.
- id: Number
- The unique identifier for the alert.
GET /alerts/{id}/applications
Specify the following parameters.
- id: Number
- The unique identifier for the alert.
POST /alerts/{id}/applications
Specify the following parameters.
- body: Object
- The list of unique identifiers for applications that is assigned and unassigned to the alert.
- assign: Array of Numbers
- IDs of resources to assign
- unassign: Array of Numbers
- IDs of resources to unassign
Specify the body parameter in the following JSON format.
{ "assign": [], "unassign": [] }
- id: Number
- The unique identifier for the alert.
Alert severity levels
The severity level you specify for an alert is displayed on the Alerts page, email notifications, and SNMP traps.
The following severity levels are supported. Severity levels 0-2 require immediate attention.
Value | Name | Description |
---|---|---|
0 | Emergency | System functionality is unavailable. |
1 | Alert | Immediate action is required. |
2 | Critical | Critical conditions are occurring. |
3 | Error | Error conditions are occurring. |
4 | Warning | Warning conditions are occurring. |
5 | Notice | Normal operations are occurring with significant conditions, such as a restart. |
6 | Info | Normal operations are occurring with process updates. |
7 | Debug | Debug-level messages are available. |
Analysis Priority
The ExtraHop system analyzes and classifies traffic for every device it discovers. Your license reserves capacity for the ExtraHop system to collect metrics for high value devices. This capacity is associated with two analysis levels: Advanced Analysis and Standard Analysis.
You can specify which devices receive Advanced Analysis and Standard Analysis levels by configuring analysis priority rules. Analysis priorities help inform the ExtraHop system about which devices are important in your environment. A third analysis level, Discovery Mode, is available for devices that are not in Advanced or Standard Analysis.
Note: | By default, each sensor manages its own analysis priorities. If the sensor is connected to a console, you can centrally manage these shared system settings from the console. |
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /analysispriority/config/{sensor_id} | Retrieve the analysis priority rules for a specific sensor. |
PUT /analysispriority/config/{sensor_id} | Replace the analysis priority rules for a specific sensor. |
GET /analysispriority/{sensor_id}/manager | Retrieve the system that is configured to manage the analysis priority rules for the sensor. |
PATCH /analysispriority/{sensor_id}/manager | Update the system that manages analysis priority rules for a specific sensor. |
Operation details
GET /analysispriority/{appliance_id}/manager
Specify the following parameters.
- appliance_id: Number
- The identifier for the local sensor. This value must be set to 0.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "manager": {} }
GET /analysispriority/config/{appliance_id}
Specify the following parameters.
- appliance_id: Number
- The identifier for a sensor. Set this value to 0 if calling on a sensor.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "advanced_rules": [], "autofill_advanced": true, "autofill_standard": true, "is_in_effect": true, "standard_rules": [] }
PUT /analysispriority/config/{appliance_id}
Specify the following parameters.
- body: Object
- The properties of the priority analysis rules.
- autofill_advanced: Boolean
- Indicates whether to automatically place devices in Advanced Analysis until capacity is reached. Devices in the advanced_rules list are prioritized, followed by devices in the standard_rules list, and then by the discovery time for the device. The capacity for Advanced Analysis is determined by the ExtraHop system license.
- advanced_rules: Array of Objects
- (Optional) The Advanced Analysis priority rules for a device group.
- type: String
- The type of group the analysis priority rules apply to.
The following values are valid:
- device_group
- object_id: Number
- The unique identifier for the group.
- description: String
- (Optional) The description for analysis priority rules.
- autofill_standard: Boolean
- Indicates whether to automatically place devices in Standard Analysis until total capacity is reached. Devices in the standard_rules list are prioritized, followed by the discovery time for the device. The total capacity is determined by the ExtraHop system license.
- standard_rules: Array of Objects
- (Optional) The Standard Analysis priority rules for a device group.
- type: String
- The type of group the analysis priority rules apply to.
The following values are valid:
- device_group
- object_id: Number
- The unique identifier for the group.
- description: String
- (Optional) The description for analysis priority rules.
Specify the body parameter in the following JSON format.
{ "advanced_rules": { "type": "string", "object_id": 0, "description": "string" }, "autofill_advanced": true, "autofill_standard": true, "standard_rules": { "type": "string", "object_id": 0, "description": "string" } }
- appliance_id: Number
- The identifier for a sensor. Set this value to 0 if calling on a sensor.
PATCH /analysispriority/{appliance_id}/manager
Specify the following parameters.
- body: Object
- The ID of the sensor or console that will manage analysis priority rules for the local sensor. Set this value to 0 to restore management to the local sensor.
- manager: Number
- The unique identifier for the managing sensor or console.
Specify the body parameter in the following JSON format.
{ "manager": 0 }
- appliance_id: Number
- The identifier for the local sensor. This value must be set to 0.
APIKey
An API key enables a user to perform operations through the ExtraHop REST API.
You can generate the initial API key for the setup user account through the REST API. All other API keys are generated through the API Access page in the Administration settings.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /apikeys | Retrieve all API keys. |
POST /apikeys | Create the initial API key for the setup user account. |
GET /apikeys/{keyid} | Retrieve information about a specific API key. |
Operation details
GET /apikeys
If the request is successful, the ExtraHop system returns an object in the following format.
{ "description": "string", "id": 0, "key": "string", "time_added": 0, "user_id": 0, "username": "string" }
GET /apikeys/{keyid}
Specify the following parameters.
- keyid: Number
- The unique identifier for the API key.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "description": "string", "id": 0, "key": "string", "time_added": 0, "user_id": 0, "username": "string" }
Appliance
The ExtraHop system consists of a network of connected ExtraHop appliances, such as sensors, consoles, recordstores, and packetstores that perform tasks such as monitoring traffic, analyzing data, storing data, and identifying detections.
You can retrieve information and establish connections for local and remote ExtraHop appliances.
Note: | You can only establish a connection between similar ExtraHop appliances, such as RevealX Enterprise or Performance. |
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /appliances | Retrieve all remote ExtraHop appliances connected to the local appliance. |
POST /appliances | Establish a new connection to a remote ExtraHop appliance. |
DELETE /appliances/{id} | Disconnect a specific ExtraHop appliance from this console. |
GET /appliances/{id} | Retrieve a specific remote ExtraHop appliance connected to the local appliance (only valid on consoles). |
GET /appliances/{id}/cloudservices | Retrieve the status of ExtraHop Cloud Services on this appliance. |
POST /appliances/{id}/cloudservices | Modify ExtraHop Cloud Services settings on this appliance. |
GET /appliances/{id}/productkey | Retrieve the product key for a specified appliance (only valid on consoles). |
GET /appliances/{ids_id}/association | Retrieve the ID of the packet sensor that the IDS sensor is joined to. |
POST /appliances/{ids_id}/association | Join an IDS sensor to a packet sensor. |
GET /appliances/firmware/next | Retrieve firmware versions that remote ExtraHop systems can be upgraded to (only valid on consoles). |
POST /appliances/firmware/upgrade | Upgrade firmware on remote ExtraHop systems connected to the local system. Firmware images are downloaded from ExtraHop Cloud Services (only valid on consoles). |
GET /appliances/{ids_id}/association | Retrieve the ID of the packet sensor that the IDS sensor is joined to (only valid on consoles). |
POST /appliances/{ids_id}/association | Join an IDS sensor to a packet sensor (only valid on consoles). |
Operation details
GET /appliances
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "add_time": 0, "advanced_analysis_capacity": 0, "analysis_levels_managed": true, "connection_type": "string", "data_access": true, "display_name": "string", "fingerprint": "string", "firmware_version": "string", "hostname": "string", "id": 0, "license_platform": "string", "license_status": "string", "licensed_features": {}, "licensed_modules": [ "string" ], "managed_by_local": true, "manages_local": true, "nickname": "string", "platform": "string", "status_message": "string", "sync_time": 0, "total_capacity": 0, "uuid": "string" }
GET /appliances/{id}
Specify the following parameters.
- id: Number
- Specify the unique identifier for the appliance. Specify 0 to select the local appliance.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "add_time": 0, "advanced_analysis_capacity": 0, "analysis_levels_managed": true, "connection_type": "string", "data_access": true, "display_name": "string", "fingerprint": "string", "firmware_version": "string", "hostname": "string", "id": 0, "license_platform": "string", "license_status": "string", "licensed_features": {}, "licensed_modules": [ "string" ], "managed_by_local": true, "manages_local": true, "nickname": "string", "platform": "string", "status_message": "string", "sync_time": 0, "total_capacity": 0, "uuid": "string" }
GET /appliances/{ids_id}/association
Specify the following parameters.
- ids_id: Number
- Specify the ID of the IDS sensor.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "associated_sensor_id": 0 }
POST /appliances/{ids_id}/association
Specify the following parameters.
- ids_id: Number
- Specify the ID of the IDS sensor.
- body: Object
- Specify the ID of the packet sensor.
- associated_sensor_id: Number
- The ID of the packet sensor.
Specify the body parameter in the following JSON format.
{ "associated_sensor_id": 0 }
GET /appliances/{id}/productkey
Specify the following parameters.
- id: Number
- Specify the unique identifier for the appliance.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "product_key": "string" }
GET /appliances/firmware/next
Specify the following parameters.
- ids: String
- (Optional) A CSV list of unique identifiers for the remote appliances. If this parameter is specified, the operation returns firmware versions that any of the specified remote appliances can be upgraded to. If this parameter is not specified, the operation returns firmware versions that any remote appliance can be upgraded to.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "release": "string", "versions": [] }
GET /appliances/{id}/cloudservices
Specify the following parameters.
- id: Number
- Specify the unique identifier for the appliance. This value must be set to 0, which selects the local appliance.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "connection_status": "string", "connection_status_color": "string", "enabled_services": [], "last_active_time": 0, "last_analyzed_time": 0 }
POST /appliances/{id}/cloudservices
Specify the following parameters.
- id: Number
- Specify the unique identifier for the appliance. This value must be set to 0, which selects the local appliance.
- body: Object
- Specify the action to modify ExtraHop Cloud Services settings.
- action: String
- Specify the action to modify ExtraHop Cloud Services settings.
The following values are valid:
- unenroll
Specify the body parameter in the following JSON format.
{ "action": "string" }
POST /appliances/firmware/upgrade
Specify the following parameters.
- body: Object
- The firmware upgrade options.
- version: String
- The firmware version to upgrade appliances to. You can retrieve a list of valid versions with the GET /api/v1/appliances/firmware/next operation.
- system_ids: Array of Numbers
- A list of unique identifiers for the remote appliances. You can retrieve appliance IDs with the GET /api/v1/appliances operation; appliance IDs are returned in the id fields of the response.
Specify the body parameter in the following JSON format.
{ "system_ids": [], "version": "string" }
POST /appliances
Specify the following parameters.
- body: Object
- Specify the properties of the new connection.
- host: String
- The hostname of the remote appliance.
- remote_setup_password: String
- (Optional) The password for the setup user account on the target EXA or ExtraHop packetstore. This parameter is not required if the remote appliance is a node in an Explore cluster already connected to the console. This parameter is not valid if the remote appliance is a sensor.
- remote_pairing_token: String
- (Optional) The token generated on the target sensor. You must specify this parameter to authenticate to the target sensor. This parameter is not valid if you are connecting to an EXA or ExtraHop packetstore.
- fingerprint: String
- (Optional) The fingerprint of the remote appliance. If you are connecting a console to an EXA or ExtraHop packetsore, this field is required. Otherwise, to bypass fingerprint verification, specify 'insecure_skip_verification'. Note that bypassing verification can allow for man-in-the-middle attacks.
- reset_configuration: Boolean
- (Optional) Indicates whether to reset the configuration of the remote appliance.
- remote_nickname_for_local: String
- (Optional) The nickname for the remote appliance, referred to by the local appliance. If you are connecting a sensor to any other appliance, this field is required.
- local_nickname_for_remote: String
- (Optional) The nickname for the local appliance, referred to by the remote appliance.
- remote_appliance_type: String
- The type of appliance for the new connection.
The following values are valid:
- command
- explore
- discover
- trace
- manages_local: Boolean
- (Optional) Indicates whether the remote appliance manages the local appliance.
- managed_by_local: Boolean
- (Optional) Indicates whether the remote appliance is managed by the local appliance. If you are connecting a console to a sensor, this field is not required because console always manage connected sensors.
- data_access: Boolean
- Indicates whether data can be shared between the local and remote appliances.
- product_key: String
- (Optional) The product key for the remote appliance. If this parameter is specified, the remote appliance is licensed with the product key. This parameter is invalid when the remote_pairing_token parameter is specified.
Specify the body parameter in the following JSON format.
{ "data_access": true, "fingerprint": "string", "host": "string", "local_nickname_for_remote": "string", "managed_by_local": true, "manages_local": true, "product_key": "string", "remote_appliance_type": "string", "remote_nickname_for_local": "string", "remote_pairing_token": "string", "remote_setup_password": "string", "reset_configuration": true }
Application
Applications are user-defined groups that collect metrics identified through triggers across multiple types of traffic. The default All Activity application contains all collected metrics.
The following table displays all of the operations you can perform on the application resource:
Operation | Description |
---|---|
GET /applications | Retrieve all applications that were active within a specific timeframe. |
POST /applications | Create a new application. |
GET /applications/{id} | Retreive a specific application. |
PATCH /applications/{id} | Update a specific application. |
GET /applications/{id}/activity | Retrieve all activity for a specific application. |
GET /applications/{id}/alerts | Retrieve all alerts that are assigned to a specific application. |
POST /applications/{id}/alerts | Assign and unassign alerts to a specific application. |
DELETE /applications/{id}/alerts/{child-id} | Unassign an alert from a specific application. |
POST /applications/{id}/alerts/{child-id} | Assign an alert to a specific application. |
GET /applications/{id}/dashboards | Retrieve all dashboards related to a specific application. |
Operation details
GET /applications/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the application.
- include_criteria: Boolean
- (Optional) Indicates whether to include the criteria associated with the application in the response.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "criteria": [], "description": "string", "discovery_id": "string", "display_name": "string", "extrahop_id": "string", "id": 0, "mod_time": 0, "node_id": 0, "user_mod_time": 0 }
POST /applications
Specify the following parameters.
- body: Object
- The properties of the application.
- node_id: Number
- (Optional) The unique identifier for the sensor that this application is associated with. The identifier can be retrieved through the GET /appliances operation. This field is valid only on a console.
- discovery_id: String
- The unique identifier for the application, which is displayed on the application page in the ExtraHop system.
- display_name: String
- The friendly name for the application.
- description: String
- (Optional) An optional description for the application.
- criteria: Array of Objects
- (Optional) An array of protocol and source criteria associated with the application. The contents of this array are defined in the 'criteria' section below.
- protocol_default: String
- The default protocols monitored by the application. Supported values are 'any' and 'none'.
- sources: Array of Objects
- An array containing one or more metric sources associated with the application. The application only collects metrics from the specified sources. The contents of this array are defined in the 'source' section below.
- type: String
- The type of metric source associated with the application. Supported source type values are 'device' and 'device_group'.
- id: Number
- The unique identifier for the device or device group associated with the application.
- protocols: Object
- (Optional) The list of one or more protocol and role mappings associated with the application. The application only collects metrics from the specified protocols. The format of each protocol is {'protocol':'role'}. Example: {'http': 'server'}. Supported role values are 'client', 'server', 'any', or 'none'.
Specify the body parameter in the following JSON format.
{ "criteria": { "protocol_default": "string", "sources": { "type": "string", "id": 0 }, "protocols": {} }, "description": "string", "discovery_id": "string", "display_name": "string", "node_id": 0 }
PATCH /applications/{id}
Specify the following parameters.
- body: Object
- Apply the specified property updates to the application.
- id: Number
- The unique identifier for the application.
GET /applications
Specify the following parameters.
- active_from: Number
- (Optional) Return only applications that are active after the specified time. Positive values specify the time in milliseconds since the epoch. Negative values specify the time in milliseconds before the current time.
- active_until: Number
- (Optional) Return only applications that are active before the specified time. Positive values specify the time in milliseconds since the epoch. Negative values specify the time in milliseconds before the current time.
- limit: Number
- (Optional) Limit the number of applications that are returned to the specified maximum number.
- offset: Number
- (Optional) Skip the first n application results. This parameter is often combined with the limit parameter.
- search_type: String
- The object type to search for.
The following values are valid:
- any
- name
- node
- discovery_id
- extrahop-id
- value: String
- (Optional) The search criteria. Add a forward slash before and after the criteria to apply RegEx matching.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "criteria": [], "description": "string", "discovery_id": "string", "display_name": "string", "extrahop_id": "string", "id": 0, "mod_time": 0, "node_id": 0, "user_mod_time": 0 }
GET /applications/{id}/activity
Specify the following parameters.
- id: Number
- The unique identifier for the application.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "application_id": 0, "from_time": 0, "id": 0, "mod_time": 0, "stat_name": "string", "until_time": 0 }
GET /applications/{id}/alerts
Specify the following parameters.
- id: Number
- Retrieve the unique identifier for the application.
- direct_assignments_only: Boolean
- (Optional) Indicates whether results are restricted to alerts that are directly assigned to the application.
POST /applications/{id}/alerts
Specify the following parameters.
- body: Object
- Assign or unassign the specified list of unique identifiers for alerts.
- assign: Array of Numbers
- IDs of resources to assign
- unassign: Array of Numbers
- IDs of resources to unassign
Specify the body parameter in the following JSON format.
{ "assign": [], "unassign": [] }
- id: Number
- Provide a unique identifier for the application.
POST /applications/{id}/alerts/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the alert.
- id: Number
- The unique identifier for the application.
Audit log
The audit log displays a record of all recorded system administration and configuration activity, such as the time of the activity, the user who performed the activity, the operation, operation details, and system component..
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /auditlog | Retrieve all audit log messages. |
Operation details
GET /auditlog
Specify the following parameters.
- limit: Number
- (Optional) The maximum number of log messages to return.
- offset: Number
- (Optional) The number of log messages to skip in the results. Returns log messages starting from the offset value.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "body": {}, "id": 0, "occur_time": 0, "time": 0 }
Auth
You can configure secure, single sign-on (SSO) authentication to the ExtraHop system through one or more security assertion markup language (SAML) identity providers.
When a user logs in to an ExtraHop system that is configured as a service provider (SP) for SAML SSO authentication, the ExtraHop system requests authorization from the appropriate identity provider (IdP). The identity provider authenticates the user's credentials and then returns the authorization for the user to the ExtraHop system. The user is then able to access the ExtraHop system.
Operation | Description |
---|---|
GET /auth/identityproviders | Retrieve all identity providers. |
POST /auth/identityproviders | Add an identity provider for remote authentication. |
DELETE /auth/identityproviders/{id} | Delete a specific identity provider. |
GET /auth/identityproviders/{id} | Retrieve a specific identity provider. |
PATCH /auth/identityproviders/{id} | Update an existing identity provider. |
GET /auth/identityproviders/{id}/privileges | Retrieve the privilege settings for a specific identity provider. |
PATCH /auth/identityproviders/{id}/privileges | Update the privilege settings for a specific identity provider. |
GET /auth/samlsp | Retrieve SAML security provider (SP) metadata for this ExtraHop system. |
Operation details
POST /auth/identityproviders
Specify the following parameters.
- body: Object
- Parameters for the identity provider.
- name: String
- The name of the identity provider.
- enabled: Boolean
- Indicates whether authentication through the identity provider is enabled on the ExtraHop system.
- entity_id: String
- (Optional) The SAML 2.0 entityID.
- sso_url: String
- (Optional) The SAML 2.0 Single Sign-On (SSO) URL.
- signing_certificate: String
- (Optional) The SAML 2.0 X.509 signing certificate in PEM format.
- type: String
- The type of identity provider.
The following values are valid:
- saml
- auto_provision_users: Boolean
- Indicates whether a user can be created on the ExtraHop system from the identity provider.
Specify the body parameter in the following JSON format.
{ "auto_provision_users": true, "enabled": true, "entity_id": "string", "name": "string", "signing_certificate": "string", "sso_url": "string", "type": "string" }
GET /auth/identityproviders
If the request is successful, the ExtraHop system returns an object in the following format.
{ "auto_provision_users": true, "enabled": true, "entity_id": "string", "id": 0, "name": "string", "signing_certificate": "string", "sso_url": "string", "type": "string" }
GET /auth/identityproviders/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the identity provider.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "auto_provision_users": true, "enabled": true, "entity_id": "string", "id": 0, "name": "string", "signing_certificate": "string", "sso_url": "string", "type": "string" }
PATCH /auth/identityproviders/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the identity provider.
- body: Object
- The parameters for the identity provider.
DELETE /auth/identityproviders/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the identity provider.
GET /auth/identityproviders/{id}/privileges
Specify the following parameters.
- id: Number
- The unique identifier for the identity provider.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "detectionsaccesslevel": {}, "ndrlevel": {}, "npmlevel": {}, "packetslevel": {}, "writelevel": {} }
Bundle
Bundles are JSON-formatted documents that contain information about selected system configuration, such as triggers, dashboards, applications, or alerts.
You can create a bundle and then transfer those configurations to another ExtraHop system, or save the bundle as a backup. Bundles can also be downloaded from ExtraHop Solution Bundles and applied through the REST API. For more information, see Bundles.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /bundles | Retrieve metadata about all bundles on the ExtraHop system. |
POST /bundles | Upload a new bundle to the ExtraHop system. |
DELETE /bundles/{id} | Delete a specific bundle. |
GET /bundles/{id} | Retrieve a specific bundle export. |
POST /bundles/{id}/apply | Apply a saved bundle to the ExtraHop system. |
Operation details
GET /bundles
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "built_in": true, "created_time": 0, "description": "string", "id": 0, "mod_time": 0, "name": "string" }
POST /bundles
Specify the following parameters.
- body: String
- A JSON formatted bundle export.
- name: String
- The friendly name for the bundle.
- description: String
- (Optional) An optional description for the bundle.
Specify the body parameter in the following JSON format.
{ "description": "string", "name": "string" }
GET /bundles/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the bundle.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "built_in": true, "created_time": 0, "description": "string", "id": 0, "mod_time": 0, "name": "string" }
DELETE /bundles/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the bundle.
POST /bundles/{id}/apply
Specify the following parameters.
- id: Number
- The unique identifier for the bundle.
- body: Object
- The configuration options for applying the bundle.
- policy: String
- Indicates whether conflicting objects should be overwritten or skipped.
The following values are valid:
- overwrite
- skip
- include_assignments: Boolean
- Indicates whether object assignments should be restored with the bundle.
- node_ids: Array of Numbers
- A list of unique identifiers for the sensors on which to apply the bundle. This field is valid only on a console.
Specify the body parameter in the following JSON format.
{ "include_assignments": true, "node_ids": [], "policy": "string" }
Cloud
This resource enables you to connect your on-premises sensors to RevealX 360 For more information, see Connect to RevealX 360 from self-managed sensors.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
POST /cloud/connect | Connect the ExtraHop system to RevealX 360. |
Operation details
POST /cloud/connect
Specify the following parameters.
- body: Object
- The token you generated from RevealX 360.
- cloud_token: String
- The token you generated from RevealX 360.
- nickname: String
- A nickname to easily identify the sensor.
Specify the body parameter in the following JSON format.
{ "cloud_token": "string", "nickname": "string" }
Custom device
You can create a custom device by defining a set of rules.
For example, you can create a custom device that has an IP address on a specified VLAN. By default, all IP addresses outside of the locally-monitored broadcast domains are aggregated behind a router. To identify devices that are behind that router, you can create a custom device, and then collect metrics from the device. For more information, see Create custom devices through the REST API.
Note: | The custom device resource is not available on consoles. |
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /customdevices | Retrieve all custom devices. |
POST /customdevices | Create a custom device. |
DELETE /customdevices/{id} | Delete a specific custom device. |
GET /customdevices/{id} | Retrieve a specific custom device. |
PATCH /customdevices/{id} | Update a specific custom device. |
Operation details
GET /customdevices
Specify the following parameters.
- include_criteria: Boolean
- (Optional) Indicates whether the custom device criteria should be included.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "author": "string", "criteria": [], "description": "string", "disabled": true, "extrahop_id": "string", "id": 0, "mod_time": 0, "name": "string" }
GET /customdevices/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the custom device.
- include_criteria: Boolean
- (Optional) Indicates whether the custom device criteria should be included.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "author": "string", "criteria": [], "description": "string", "disabled": true, "extrahop_id": "string", "id": 0, "mod_time": 0, "name": "string" }
DELETE /customdevices/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the custom device.
POST /customdevices
Specify the following parameters.
- body: Object
- Apply the specified property values to the new custom device.
- author: String
- The name of the custom device creator.
- extrahop_id: String
- (Optional) A unique identifier for the custom device. If this field is not specified, an ID is generated from the custom device name. The ID cannot contain spaces and cannot be changed after the custom device is saved.
- name: String
- The friendly name for the custom device.
- description: String
- (Optional) An optional description of the custom device.
- disabled: Boolean
- Indicates whether the custom device is inactive.
- criteria: Array of Objects
- (Optional) An array of custom device criteria for this device. If this field is specified with the PATCH method, all previously specified criteria are deleted.
- ipaddr: String
- The IP address to match the custom device to.
- ipaddr_direction: String
- The direction of traffic to match the ipaddr address to. The criteria determines which direction of traffic to or from the ipaddr address is matched.
The following values are valid:
- any
- dst
- src
- ipaddr_peer: String
- The IP address that the ipadder address is communicating with to match the custom device to. If specified, this parameter limits the traffic matched by the custom device. For example, if ipaddr_direction is "src", the custom device only matches traffic to the ipaddr_peer address from the ipaddr address. This parameter is only valid if ipaddr is specified and ipaddr_direction is not "any".
- src_port_min: Number
- The lower source port boundary to match the custom device to. Supported values: 1-65535.
- src_port_max: Number
- The maximum source port boundary to match the custom device to. Supported values: 1-65535.
- dst_port_min: Number
- The lower destination port boundary to match the custom device to. Supported values: 1-65535.
- dst_port_max: Number
- The maximum destination port boundary to match the custom device to. Supported values: 1-65535.
- vlan_min: Number
- The lower VLAN boundary to match the custom device to.
- vlan_max: Number
- The maximum VLAN boundary to match the custom device to.
Specify the body parameter in the following JSON format.
{ "author": "string", "criteria": { "ipaddr": "string", "ipaddr_direction": "string", "ipaddr_peer": "string", "src_port_min": 0, "src_port_max": 0, "dst_port_min": 0, "dst_port_max": 0, "vlan_min": 0, "vlan_max": 0 }, "description": "string", "disabled": true, "extrahop_id": "string", "name": "string" }
Customization
The Customization resource enables you to manage backups files on the ExtraHop system. You must have system and access administration privileges to perform operations on this resource.
Backup files contain both customizations and systems resources. Customizations are user-defined objects, such as alerts, dashboards, triggers, and custom metrics. System resources are items such as bundles, local users and groups, and the TLS certificate. For more information, see Back up and restore a sensor or console.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /customizations | Retrieve all backup files. |
POST /customizations | Create a backup file. |
GET /customizations/status | Retrieve status details for the most recent backup attempt. |
DELETE /customizations/{id} | Delete a specific backup file. |
GET /customizations/{id} | Retrieve a specific backup file. |
POST /customizations/{id}/apply | Restore only customizations from a specific backup file. |
POST /customizations/{id}/download | Download a specific backup file. |
Operation details
GET /customizations
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "auto": true, "create_time": 0, "id": 0, "name": "string", "recovered": true }
POST /customizations
Specify the following parameters.
- body: Object
- A unique name for the backup file.
- name: String
- A unique name for the backup file.
Specify the body parameter in the following JSON format.
{ "name": "string" }
GET /customizations/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the backup file.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "auto": true, "create_time": 0, "id": 0, "name": "string", "recovered": true }
DELETE /customizations/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the backup file.
POST /customizations/{id}/apply
Specify the following parameters.
- id: Number
- The unique identifier for the backup file.
Dashboards
Dashboards are built-in or customized views of your ExtraHop metrics information. For more information, see Dashboards.
The following table displays all of the operations you can perform on this resource:
Operation | Description | ||
---|---|---|---|
GET /dashboards | Retrieve all dashboards. | ||
DELETE /dashboards/{id} | Delete a specific dashboard. | ||
GET /dashboards/{id} | Retrieve a specific dashboard. | ||
PATCH /dashboards/{id} | Update ownership of a specific dashboard. | ||
GET /dashboards/{id}/reports | Retrieve dashboard reports that contain a specific dashboard.
|
||
GET /dashboards/{id}/sharing | Retrieve the users and their sharing permissions for a specific dashboard. | ||
PATCH /dashboards/{id}/sharing | Update the users and their sharing permissions for a specific dashboard. | ||
PUT /dashboards/{id}/sharing | Replace the users and their sharing permissions for a specific dashboard. |
Operation details
GET /dashboards
If the request is successful, the ExtraHop system returns an object in the following format.
{ "author": "string", "comment": "string", "id": 0, "mod_time": 0, "name": "string", "owner": "string", "rights": [ "string" ], "short_code": "string", "type": "string" }
GET /dashboards/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the dashboard.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "author": "string", "comment": "string", "id": 0, "mod_time": 0, "name": "string", "owner": "string", "rights": [ "string" ], "short_code": "string", "type": "string" }
DELETE /dashboards/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the dashboard.
PATCH /dashboards/{id}
Specify the following parameters.
- body: Object
- The username of the dashboard owner.
- id: Number
- The unique identifier for the dashboard.
GET /dashboards/{id}/sharing
Specify the following parameters.
- id: Number
- The unique identifier for the dashboard.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "anyone": "string", "groups": {}, "users": {} }
PUT /dashboards/{id}/sharing
Specify the following parameters.
- body: Object
- The users and their permission levels.
- id: Number
- The unique identifier for the dashboard.
Device
Devices are objects on your network that have been identified and classified by your ExtraHop system. For more information, see Devices.
The following table displays all of the operations you can perform on this resource:
Operation | Description | ||
---|---|---|---|
GET /devices | Retrieve all devices that were active within a specific time period. For more
information, see Extract the device list through the REST API.
|
||
POST /devices/search | Retrieve all devices that match specific criteria. For more information, see Search for a device through the REST API.
|
||
GET /devices/{id} | Retrieve a specific device. | ||
PATCH /devices/{id} | Update a specific device. | ||
GET /devices/{id}/activity | Retrieve all activity for a device. | ||
GET /devices/{id}/alerts | Retrieve all alerts that are assigned to a specific device. | ||
POST /devices/{id}/alerts | Assign and unassign a specific device to alerts. | ||
DELETE /devices/{id}/alerts/{child-id} | Unassign an alert from a specific device. | ||
POST /devices/{id}/alerts/{child-id} | Assign an alert to a specific device. | ||
GET /devices/{id}/dashboards | Retrieve all dashboards related to a specific device. | ||
GET /devices/{id}/devicegroups | Retrieve all device groups that are assigned to a specific device. | ||
POST /devices/{id}/devicegroups | Assign and unassign a specific device to device groups. | ||
DELETE /devices/{id}/devicegroups/{child-id} | Unassign a device group from a specific device. | ||
POST /devices/{id}/devicegroups/{child-id} | Assign a device group to a specific device. | ||
GET /devices/{id}/dnsnames | Retrieve all DNS names that are associated with a specific device. | ||
GET /devices/{id}/ipaddrs | Retrieve all IP addresses that were associated with a specific device within a given time period. | ||
GET /devices/{id}/software | Retrieve a list of software running on the specified device. | ||
GET /devices/{id}/tags | Retrieve all tags that are assigned to a specific device. | ||
POST /devices/{id}/tags | Assign and unassign a specific device to tags. | ||
DELETE /devices/{id}/tags/{child-id} | Unassign a tag from a specific device. | ||
POST /devices/{id}/tags/{child-id} | Assign a tag to a specific device. | ||
GET /devices/{id}/triggers | Retrieve all triggers that are assigned to a specific device. | ||
POST /devices/{id}/triggers | Assign and unassign a specific device to triggers. | ||
DELETE /devices/{id}/triggers/{child-id} | Unassign a trigger from a specific device. | ||
POST /devices/{id}/triggers/{child-id} | Assign a trigger to a specific device. |
Operation details
GET /devices
Specify the following parameters.
- active_from: Number
- (Optional) The beginning timestamp for the request. Return only devices active after this time. Time is expressed in milliseconds since the epoch. 0 indicates the time of the request. A negative value is evaluated relative to the current time. The default unit for a negative value is milliseconds, but other units can be specified with a unit suffix. See the REST API Guide for supported time units and suffixes.
- active_until: Number
- (Optional) The ending timestamp for the request. Return only device active before this time. Follows the same time value guidelines as the active_from parameter.
- limit: Number
- (Optional) Limit the number of devices returned to the specified maximum number.
- offset: Number
- (Optional) Skip the first n device results. This parameter is often combined with the limit parameter.
- search_type: String
- Indicates the field to search.
The following values are valid:
- any
- name
- discovery_id
- ip address
- mac address
- vendor
- type
- tag
- activity
- node
- vlan
- discover time
- value: String
- (Optional) Specifies the search criteria.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "activity": [], "analysis": "string", "analysis_level": 0, "auto_role": "string", "cdp_name": "string", "cloud_account": "string", "cloud_instance_description": "string", "cloud_instance_id": "string", "cloud_instance_name": "string", "cloud_instance_type": "string", "critical": true, "custom_criticality": "string", "custom_make": "string", "custom_model": "string", "custom_name": "string", "custom_type": "string", "default_name": "string", "description": "string", "device_class": "string", "dhcp_name": "string", "discover_time": 0, "discovery_id": "string", "display_name": "string", "dns_name": "string", "extrahop_id": "string", "id": 0, "ipaddr4": "string", "ipaddr6": "string", "is_l3": true, "last_seen_time": 0, "macaddr": "string", "mod_time": 0, "model": "string", "model_override": "string", "netbios_name": "string", "node_id": 0, "on_watchlist": true, "parent_id": 0, "role": "string", "subnet_id": "string", "user_mod_time": 0, "vendor": "string", "vlanid": 0, "vpc_id": "string" }
POST /devices/search
Specify the following parameters.
- body: Object
- The device criteria.
- active_from: Number
- (Optional) The beginning timestamp for the request. Return only devices active after this time. Time is expressed in milliseconds since the epoch. 0 indicates the time of the request. A negative value is evaluated relative to the current time. The default unit for a negative value is milliseconds, but other units can be specified with a unit suffix. See the REST API Guide for supported time units and suffixes.
- active_until: Number
- (Optional) The ending timestamp for the request. Return only devices active before this time. Follows the same time value guidelines as the active_from parameter.
- limit: Number
- (Optional) Limit the number of devices returned to the specified maximum number.
- offset: Number
- (Optional) Skip the specified number of devices. This parameter is often combined with the limit parameter to paginate result sets.
- filter: Object
- (Optional) Specify the filter criteria for search results.
- field: String
- The name of the field to filter results on. The search compares the contents of the field parameter to the value of the operand parameter.
The following values are valid:
- name
- discovery_id
- ipaddr
- macaddr
- vendor
- tag
- activity
- node
- vlan
- discover_time
- role
- dns_name
- dhcp_name
- netbios_name
- cdp_name
- custom_name
- software
- model
- is_critical
- instance_id
- instance_name
- instance_type
- cloud_account
- vpc_id
- subnet_id
- is_active
- analysis
- network_locality_type
- network_locality_id
- id
- operator: String
- The compare method applied when matching the operand value against the field contents. All filter objects require an operator.
The following values are valid:
- >
- <
- <=
- >=
- =
- !=
- startswith
- and
- or
- not
- exists
- not_exists
- ~
- !~
- in
- not_in
- operand: String or Number or Object or Array
- The value that the query attempts to match. The query compares the value of the operand to the contents of the field parameter and applies the compare method specified by the operator parameter. You can specify the operand as a string, integer, or object. For information about object values, see the REST API Guide.
- rules: Array of Objects
- An array of one or more filter objects, which can be embedded recursively. Only "and", "or", and "not" operators are allowed for this parameter.
- result_fields: Array of Strings
- (Optional) Returns the specified fields and the device id. If this option is not specified, all fields are returned.
The following values are valid:
- mod_time
- node_id
- id
- extrahop_id
- discovery_id
- display_name
- description
- user_mod_time
- discover_time
- vlanid
- parent_id
- macaddr
- vendor
- is_l3
- ipaddr4
- ipaddr6
- device_class
- default_name
- custom_name
- cdp_name
- dhcp_name
- netbios_name
- dns_name
- custom_type
- auto_role
- analysis_level
- analysis
- role
- on_watchlist
- last_seen_time
- activity
- model
- model_override
- custom_make
- custom_model
- critical
- custom_criticality
- cloud_instance_id
- cloud_instance_type
- cloud_instance_description
- cloud_instance_name
- cloud_account
- vpc_id
- subnet_id
Specify the body parameter in the following JSON format.
{ "active_from": 0, "active_until": 0, "filter": { "field": "string", "operator": "string", "operand": "string", "rules": [] }, "limit": 0, "offset": 0, "result_fields": [] }
GET /devices/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "activity": [], "analysis": "string", "analysis_level": 0, "auto_role": "string", "cdp_name": "string", "cloud_account": "string", "cloud_instance_description": "string", "cloud_instance_id": "string", "cloud_instance_name": "string", "cloud_instance_type": "string", "critical": true, "custom_criticality": "string", "custom_make": "string", "custom_model": "string", "custom_name": "string", "custom_type": "string", "default_name": "string", "description": "string", "device_class": "string", "dhcp_name": "string", "discover_time": 0, "discovery_id": "string", "display_name": "string", "dns_name": "string", "extrahop_id": "string", "id": 0, "ipaddr4": "string", "ipaddr6": "string", "is_l3": true, "last_seen_time": 0, "macaddr": "string", "mod_time": 0, "model": "string", "model_override": "string", "netbios_name": "string", "node_id": 0, "on_watchlist": true, "parent_id": 0, "role": "string", "subnet_id": "string", "user_mod_time": 0, "vendor": "string", "vlanid": 0, "vpc_id": "string" }
PATCH /devices/{id}
Specify the following parameters.
- body: Object
- Apply the specified property value updates to the device.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
GET /devices/{id}/activity
Specify the following parameters.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "device_id": 0, "from_time": 0, "id": 0, "mod_time": 0, "stat_name": "string", "until_time": 0 }
GET /devices/{id}/ipaddrs
Specify the following parameters.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
- from: Number
- (Optional) Retrieves IP addresses that were associated with the device after the specified date, expressed in milliseconds since the epoch.
- until: Number
- (Optional) Retrieves IP addresses that were associated with the device before the specified date, expressed in milliseconds since the epoch.
GET /devices/{id}/dnsnames
Specify the following parameters.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
- from: Number
- (Optional) Retrieves DNS names that were associated with the device after the specified date, expressed in milliseconds since the epoch.
- until: Number
- (Optional) Retrieves DNS names that were associated with the device before the specified date, expressed in milliseconds since the epoch.
GET /devices/{id}/triggers
Specify the following parameters.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
- direct_assignments_only: Boolean
- (Optional) Restrict results to only triggers that are directly assigned to the device.
POST /devices/{id}/triggers
Specify the following parameters.
- body: Object
- A list of unique identifiers for triggers that are assigned and unassigned to the device.
- assign: Array of Numbers
- IDs of resources to assign
- unassign: Array of Numbers
- IDs of resources to unassign
Specify the body parameter in the following JSON format.
{ "assign": [], "unassign": [] }
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
POST /devices/{id}/triggers/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the trigger.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
DELETE /devices/{id}/triggers/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the trigger.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
GET /devices/{id}/dashboards
Specify the following parameters.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
GET /devices/{id}/devicegroups
Specify the following parameters.
- id: Number
- The unique identifier for the device.
- active_from: Number
- (Optional) The beginning timestamp for the request. Return only dynamic device groups that the device belonged to after this time. Time is expressed in milliseconds since the epoch. 0 indicates the time of the request. A negative value is evaluated relative to the current time. The default unit for a negative value is milliseconds, but other units can be specified with a unit suffix. See the REST API Guide for supported time units and suffixes.
- active_until: Number
- (Optional) The ending timestamp for the request. Return only dynamic device groups that the device belonged to before this time. Follows the same time value guidelines as the active_from parameter.
POST /devices/{id}/devicegroups
Specify the following parameters.
- body: Object
- The list of unique identifiers for device groups that are assigned and unassigned to the device.
- assign: Array of Numbers
- IDs of resources to assign
- unassign: Array of Numbers
- IDs of resources to unassign
Specify the body parameter in the following JSON format.
{ "assign": [], "unassign": [] }
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
POST /devices/{id}/devicegroups/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the device group.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
DELETE /devices/{id}/devicegroups/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the device group.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
GET /devices/{id}/tags
Specify the following parameters.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
POST /devices/{id}/tags
Specify the following parameters.
- body: Object
- A list of unique identifiers for tags that are assigned and unassigned to the device.
- assign: Array of Numbers
- IDs of resources to assign
- unassign: Array of Numbers
- IDs of resources to unassign
Specify the body parameter in the following JSON format.
{ "assign": [], "unassign": [] }
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
POST /devices/{id}/tags/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the tag.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
DELETE /devices/{id}/tags/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the tag.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
GET /devices/{id}/alerts
Specify the following parameters.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
- direct_assignments_only: Boolean
- (Optional) Restrict results to only alerts that are directly assigned to the device.
POST /devices/{id}/alerts
Specify the following parameters.
- body: Object
- The list of unique identifiers for alerts that are assigned and unassigned to the device.
- assign: Array of Numbers
- IDs of resources to assign
- unassign: Array of Numbers
- IDs of resources to unassign
Specify the body parameter in the following JSON format.
{ "assign": [], "unassign": [] }
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
POST /devices/{id}/alerts/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the alert.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
DELETE /devices/{id}/alerts/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the alert.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
GET /devices/{id}/software
Specify the following parameters.
- id: Number
- The unique identifier for the device, which is displayed as the API ID on the device page in the ExtraHop system.
- from: Number
- (Optional) Returns software that was observed on the device after the specified date, expressed in milliseconds since the epoch.
- until: Number
- (Optional) Returns software that was observed on the device before the specified date, expressed in milliseconds since the epoch.
Operand values for device search
The POST /devices/search operation enables you to search for devices by criteria specified in filter objects. Each object should contain a unique value for the operand field that is valid for the specified field value.
activity
To search by metric activity, specify the field value as activity and the operand value as a metric_category. You can find metric_category values in the REST API Parameters section of the Metric Catalog.
The following example returns results for devices that match all metric activity classified for a DHCP client, such as the number of DHCP requests sent.
{ "filter": { "field": "activity", "operand": "dhcp_client", "operator": "=" } }
Tip: | Programmatically retrieve a list of all metric activity for a device through the GET /devices/{id}/activity operation. The stat_name value matches the metric_category value in the metric_catalog, after the final dot. |
In the following example response, the stat_name value is extrahop.device.dhcp_client. Remove the text before the final dot to identify the metric_catalog value of dhcp_client.
{ "id": 198606, "from_time": 1581537120000, "until_time": 1581542520000, "mod_time": 1581542533963, "device_id": 30096, "stat_name": "extrahop.device.dhcp_client" }
analysis
To search by device analysis level, specify the field value as analysis and the operand value as one of the following strings:
- standard
- Devices in Standard Analysis.
- advanced
- Devices in Advanced Analysis.
- discovery
- Devices in Discovery Mode.
- l2_exempt
- Devices in L2 Parent Analysis.
- flow_log
- Devices in Flow Analysis.
discover_time
To search by a time range, specify the field value as discover_time and an operand value with from and until parameters, where the values are dates, expressed in milliseconds since the epoch.
The following example returns results for all device activity that occurred between 1:00 PM to 3:00 PM on August 21, 2019.
{ "filter": { "field": "discover_time", "operand": { "from": "1566392400000", "until": "1566399600000" }, "operator": "=" } }
discovery_id
To search by the unique ID for the device, specify the field value as discovery_id and the operand value as the discovery ID.
{ "filter": { "field": "discovery_id", "operand": "c12vf90qpg290000", "operator": "=" } }
id
To retrieve multiple devices, specify the field value as id, the operator value as in, and the operand value as an array of IDs.
{ "filter": { "field": "id", "operand": [5388,5387], "operator": "in" } }
To exclude devices from search results, specify a filter with multiple rules, and specify a rule with the field value as id, the operator value as not_in, and the operand value as an array of IDs.
{ "filter": { "operator": "and", "rules": [ { "field": "id", "operand": [5388,5387], "operator": "not_in" }, { "field": "discover_time", "operand": { "from": "1692984750000", "until": "1693416750000" }, "operator": "=" } ] } }
is_active
{ "filter": { "field": "is_active", "operand": true, "operator": "=" } }
ipaddr
To search by IP address, specify the field value as ipaddr and the operand value as an IP address or CIDR block.
{ "filter": { "field": "ipaddr", "operand": "192.168.12.0/28", "operator": "=" } }
node
To search by the unique ID of a sensor, specify the field value as node and the operand value as the sensor UUID.
{ "filter": { "field": "node", "operand": "qqvsplfa-zxsk-32l0-19g1-076vfr42pw31", "operator": "=" } }
macaddr
To search by the MAC address of a device, specify the field value as macaddr and the operand value as the device MAC address. The following example returns results for devices with a MAC address of C1:1C:N2:0Q:PJ:10 or C1:1C:N2:0Q:PJ:11.
{ "filter": { "operator": "or", "rules": [ { "field": "macaddr", "operand": "C1:1C:N2:0Q:PJ:10", "operator": "=" }, { "field": "macaddr", "operand": "C1:1C:N2:0Q:PJ:11", "operator": "=" } ] } }
model
To search by the device model, specify the field value as model. If the operator is =, !=, exists, or not_exists, specify the operand as the model ID, which you can view in the model field of POST /device/search responses.
{ "filter": { "field": "model", "operand": "apple_ipad_pro_12_9_inch_wifi_cellular_5th_gen", "operator": "=" } }
If the operator is ~ or !~, specify the operand as the name of the make and model, which you can view in the ExtraHop system when searching for a device.
{ "filter": { "field": "model", "operand": "Apple iPad Pro", "operator": "~" } }
name
To search by the device display name, specify the field value as name and the operand value as the device name or as a regex string.
{ "filter": { "field": "name", "operand": "VMware B2CEB6", "operator": "=" } }
network_locality_id
To search by network locality, specify the field value as network_locality_id and the operand value as a network locality ID.
{ "filter": { "field": "network_locality_id", "operand": 123, "operator": "=" } }
role
To search by the device role, specify the field value as role and the operand value as the device role.
{ "filter": { "field": "role", "operand": "voip_phone", "operator": "=" } }
software
To search by the software running on the device, specify the field value as software and the operand value as the ID associated with that software on the ExtraHop system .
{ "filter": { "field": "software", "operand": "windows_10", "operator": "=" } }
Tip: | Programmatically retrieve a list of all software IDs associated with a
device through the GET /devices/{id}/software operation. In the following example response, the id value for the software is windows_10. [ { "software_type": "OS", "name": "Windows", "version": "10", "description": null, "id": "windows_10" } ] |
software_type
To search by the type of software running on the device, specify the field value as software_type and the operand value as the software type ID.
{ "filter": { "field": "software_type", "operand": "OS", "operator": "=" } }
Tip: | Programmatically retrieve a list of all software type
IDs associated with a device through the GET /devices/{id}/software
operation. In the following example response, the ID value for the software type is OS. [ { "software_type": "OS", "name": "Windows", "version": "10", "description": null, "id": "windows_10" } ] |
tag
To search by a device tag, specify the field value as tag and the operand value as the tag name or as a regex string.
{ "filter": { "field": "tag", "operand": "Custom Tag", "operator": "=" } }
Tip: | Programmatically retrieve a list of all device tags through the
GET /devices/{id}/tags operation. In the following example response, the name value for the tag is Custom Tag. [ { "mod_time": 1521577040934, "id": 19, "name": "Custom Tag" } ] |
vlan
To search by the ID of a VLAN, specify the field value as vlan and the operand value as the ID of the VLAN.
{ "filter": { "field": "vlan", "operand": "0", "operator": "=" } }
Search with regular expressions (regex)
For certain field values, the string can be in regex syntax. Specify the operand value as an object that has a value parameter with the regex syntax you want to match and an is_regex parameter that is set to true. The following example returns results for all DNS names that end with com.
{ "filter": { "field": "dns_name", "operand": { "value": ".*?com", "is_regex": true }, "operator": "=" } }
An operand field with regex syntax is valid for the following field values:
- cdp_name
- custom_name
- dns_name
- dhcp_name
- model
- name
- netbios_name
- software
- tag
- vendor
Supported time units
For most parameters, the default unit for time measurement is milliseconds. However, the following parameters return or accept alternative time units such as minutes and hours:
- Device
- active_from
- active_until
- Device group
- active_from
- active_until
- Metrics
- from
- until
- Record Log
- from
- until
- context_ttl
The following table displays supported time units:
Time unit | Unit suffix |
---|---|
Year | y |
Month | M |
Week | w |
Day | d |
Hour | h |
Minute | m |
Second | s |
Millisecond | ms |
To specify a time unit other than milliseconds for a parameter, append the unit suffix to the value. For example, to request devices active in the last 30 minutes, specify the following parameter value:
GET /api/v1/devices?active_from=-30m
The following example specifies a search for HTTP records created between 1 and 2 hours ago:
{ "from": "-2h", "until": "-1h", "types": ["~http"] }
Device group
Device groups can be either static or dynamic.
A static device group is user-defined; you create a device group and then manually identify and assign each device to that group. A dynamic device group is defined and automatically managed by a set of configured rules.
For example, you can create a device group and then set a rule to classify all devices within a certain IP address range to be added to that group automatically. For more information, see Device Groups.
The following table displays all of the operations you can perform on this resource:
Operation | Description | ||
---|---|---|---|
GET /devicegroups | Retrieve all device groups that were active within a specific time period. | ||
POST /devicegroups | Create a new device group. | ||
DELETE /devicegroups/{id} | Delete a device group. | ||
GET /devicegroups/{id} | Retrieve a specific device group. | ||
PATCH /devicegroups/{id} | Update a specific device group. | ||
GET /devicegroups/{id}/alerts | Retrieve all alerts that are assigned to a specific device group. | ||
POST /devicegroups/{id}/alerts | Assign and unassign a specific device group to alerts. | ||
DELETE /devicegroups/{id}/alerts/{child-id} | Unassign an alert from a specific device group. | ||
POST /devicegroups/{id}/alerts/{child-id} | Assign an alert to a specific device group. | ||
GET /devicegroups/{id}/dashboards | Retrieve all dashboards related to a specific device group. | ||
GET /devicegroups/{id}/devices | Retrieve all devices in the device group that are active within a specific time
window.
|
||
POST /devicegroups/{id}/devices | Assign and unassign a devices to a specific static device group. | ||
DELETE /devicegroups/{id}/devices/{child-id} | Unassign a device from a specific static device group. | ||
POST /devicegroups/{id}/devices/{child-id} | Assign a device to a specific static device group. | ||
GET /devicegroups/{id}/triggers | Retrieve all triggers that are assigned to a specific device group. | ||
POST /devicegroups/{id}/triggers | Assign and unassign a specific device group to triggers. | ||
DELETE /devicegroups/{id}/triggers/{child-id} | Unassign a trigger from a specific device group. | ||
POST /devicegroups/{id}/triggers/{child-id} | Assign a trigger to a specific device group. |
Operation details
GET /devicegroups
Specify the following parameters.
- since: Number
- (Optional) Only return device groups that were modified after this time, expressed in milliseconds since the epoch.
- all: Boolean
- (Optional) Deprecated. Replaced by the type parameter.
- name: String
- (Optional) The Regex search value to filter the device groups by name.
- type: String
- (Optional) Only return device groups of the specified type.
The following values are valid:
- user_created
- built_in
- all
If the request is successful, the ExtraHop system returns an object in the following format.
{ "built_in": true, "description": "string", "dynamic": true, "editors": [], "field": "string", "filter": {}, "id": 0, "include_custom_devices": true, "mod_time": 0, "name": "string", "value": "string" }
GET /devicegroups/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the device group.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "built_in": true, "description": "string", "dynamic": true, "editors": [], "field": "string", "filter": {}, "id": 0, "include_custom_devices": true, "mod_time": 0, "name": "string", "value": "string" }
POST /devicegroups
Specify the following parameters.
- body: Object
- Apply the specified property values to the new device group.
- description: String
- An optional description of the device group.
- name: String
- The friendly name for the device group.
- include_custom_devices: Boolean
- (Optional) Deprecated. Replaced by the filter parameter.
- dynamic: Boolean
- (Optional) Indicates whether the device group is dynamic.
- field: String
- Deprecated. Replaced by the filter parameter.
The following values are valid:
- any
- name
- ip address
- mac address
- vendor
- type
- tag
- vlan
- activity
- node
- discover time
- value: Object
- (Optional) Deprecated. Replaced by the filter parameter.
- filter: Object
- (Optional) Specify the filter criteria for search results.
- field: String
- The name of the field to filter results on. The search compares the contents of the field parameter to the value of the operand parameter.
The following values are valid:
- name
- ipaddr
- macaddr
- vendor
- tag
- activity
- node
- vlan
- discover_time
- role
- dns_name
- dhcp_name
- netbios_name
- cdp_name
- custom_name
- software
- model
- is_critical
- instance_id
- instance_name
- instance_type
- cloud_account
- vpc_id
- subnet_id
- is_active
- network_locality_type
- network_locality_id
- id
- operator: String
- The compare method applied when matching the operand value against the field contents. All filter objects require an operator.
The following values are valid:
- >
- <
- <=
- >=
- =
- !=
- startswith
- and
- or
- not
- exists
- not_exists
- ~
- !~
- operand: String or Number or Object
- The value that the query attempts to match. The query compares the value of the operand to the contents of the field parameter and applies the compare method specified by the operator parameter. You can specify the operand as a string, integer, or object. For information about object values, see the REST API Guide.
- rules: Array of Objects
- An array of one or more filter objects, which can be embedded recursively. Only "and", "or", and "not" operators are allowed for this parameter.
- editors: Array of Strings
- (Optional) The list of users that can edit the device group.
Specify the body parameter in the following JSON format.
{ "description": "string", "dynamic": true, "editors": [], "field": "string", "filter": { "field": "string", "operator": "string", "operand": "string", "rules": [] }, "include_custom_devices": true, "name": "string", "value": "string" }
DELETE /devicegroups/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the device group.
PATCH /devicegroups/{id}
Specify the following parameters.
- body: Object
- Apply the specified property value updates to a specific device group.
- description: String
- An optional description of the device group.
- name: String
- The friendly name for the device group.
- include_custom_devices: Boolean
- (Optional) Deprecated. Replaced by the filter parameter.
- field: String
- Deprecated. Replaced by the filter parameter.
The following values are valid:
- any
- name
- ip address
- mac address
- vendor
- type
- tag
- vlan
- activity
- node
- discover time
- value: Object
- (Optional) Deprecated. Replaced by the filter parameter.
- filter: Object
- (Optional) Specify the filter criteria for search results.
- editors: Array of Strings
- (Optional) The list of users that can edit the device group.
Specify the body parameter in the following JSON format.
{ "description": "string", "editors": [], "field": "string", "filter": {}, "include_custom_devices": true, "name": "string", "value": "string" }
- id: Number
- The unique identifier for the device group.
GET /devicegroups/{id}/alerts
Specify the following parameters.
- id: Number
- The unique identifier for the device group.
- direct_assignments_only: Boolean
- (Optional) Restrict results to only alerts that are directly assigned to the device group.
POST /devicegroups/{id}/alerts/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the alert.
- id: Number
- The unique identifier for the device group.
DELETE /devicegroups/{id}/alerts/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the alert.
- id: Number
- The unique identifier for the device group.
POST /devicegroups/{id}/alerts
Specify the following parameters.
- body: Object
- The list of unique identifiers for alerts that is assigned and unassigned to the device group.
- assign: Array of Numbers
- IDs of resources to assign
- unassign: Array of Numbers
- IDs of resources to unassign
Specify the body parameter in the following JSON format.
{ "assign": [], "unassign": [] }
- id: Number
- The unique identifier for the device group.
GET /devicegroups/{id}/triggers
Specify the following parameters.
- id: Number
- The unique identifier for the device group.
- direct_assignments_only: Boolean
- (Optional) Restrict results to only triggers that are directly assigned to the device group.
POST /devicegroups/{id}/triggers/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the trigger.
- id: Number
- The unique identifier for the device group.
DELETE /devicegroups/{id}/triggers/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for the trigger.
- id: Number
- The unique identifier for the device group.
POST /devicegroups/{id}/triggers
Specify the following parameters.
- body: Object
- The list of unique identifiers for triggers that is assigned and unassigned to the device group.
- assign: Array of Numbers
- IDs of resources to assign
- unassign: Array of Numbers
- IDs of resources to unassign
Specify the body parameter in the following JSON format.
{ "assign": [], "unassign": [] }
- id: Number
- The unique identifier for the device group.
POST /devicegroups/{id}/devices/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for a device.
- id: Number
- The unique identifier for the device group.
DELETE /devicegroups/{id}/devices/{child-id}
Specify the following parameters.
- child-id: Number
- The unique identifier for a device.
- id: Number
- The unique identifier for the device group.
POST /devicegroups/{id}/devices
Specify the following parameters.
- body: Object
- The list of unique identifiers for devices that is assigned and unassigned to the device group.
- assign: Array of Numbers
- IDs of resources to assign
- unassign: Array of Numbers
- IDs of resources to unassign
Specify the body parameter in the following JSON format.
{ "assign": [], "unassign": [] }
- id: Number
- The unique identifier for the device group.
GET /devicegroups/{id}/devices
Specify the following parameters.
- id: Number
- The unique identifier for the device group.
- active_from: Number
- (Optional) The beginning timestamp for the request. Return only devices active after this time. Time is expressed in milliseconds since the epoch. 0 indicates the time of the request. A negative value is evaluated relative to the current time. The default unit for a negative value is milliseconds, but other units can be specified with a unit suffix. See the REST API Guide for supported time units and suffixes.
- active_until: Number
- (Optional) The ending timestamp for the request. Return only device active before this time. Follows the same time value guidelines as the active_from parameter.
- limit: Number
- (Optional) Limit the number of devices returned.
- offset: Number
- (Optional) Skip the first n device results. This parameter is often combined with the limit parameter.
Supported time units
For most parameters, the default unit for time measurement is milliseconds. However, the following parameters return or accept alternative time units such as minutes and hours:
- Device
- active_from
- active_until
- Device group
- active_from
- active_until
- Metrics
- from
- until
- Record Log
- from
- until
- context_ttl
The following table displays supported time units:
Time unit | Unit suffix |
---|---|
Year | y |
Month | M |
Week | w |
Day | d |
Hour | h |
Minute | m |
Second | s |
Millisecond | ms |
To specify a time unit other than milliseconds for a parameter, append the unit suffix to the value. For example, to request devices active in the last 30 minutes, specify the following parameter value:
GET /api/v1/devices?active_from=-30m
The following example specifies a search for HTTP records created between 1 and 2 hours ago:
{ "from": "-2h", "until": "-1h", "types": ["~http"] }
Operand values for device groups
The POST /devicegroups operation enables you to create device groups according to criteria specified in filter objects. Each object should contain a unique value for the operand field that is valid for the specified field value.
activity
To select devices by metric activity, specify the field value as activity and the operand value as a metric_category. You can find metric_category values in the REST API Parameters section of the Metric Catalog.
The following example selects devices with metric activity classified for a DHCP client, such as the number of DHCP requests sent.
{ "filter": { "field": "activity", "operand": "dhcp_client", "operator": "=" } }
Tip: | Programmatically retrieve a list of all metric activity for a device through the GET /devices/{id}/activity operation. The stat_name value matches the metric_category value in the metric_catalog, after the final dot. |
In the following example response, the stat_name value is extrahop.device.dhcp_client. Remove the text before the final dot to identify the metric_catalog value of dhcp_client.
{ "id": 198606, "from_time": 1581537120000, "until_time": 1581542520000, "mod_time": 1581542533963, "device_id": 30096, "stat_name": "extrahop.device.dhcp_client" }
discover_time
To select devices by a time range, specify the field value as discover_time and an operand value with from and until parameters, where the values are dates, expressed in milliseconds since the epoch.
The following example selects devices with activity that occurred between 1:00 PM to 3:00 PM on August 21, 2019.
{ "filter": { "field": "discover_time", "operand": { "from": "1566392400000", "until": "1566399600000" }, "operator": "=" } }
discovery_id
To select devices by unique device ID, specify the field value as discovery_id and the operand value as the discovery ID.
{ "filter": { "field": "discovery_id", "operand": "c12vf90qpg290000", "operator": "=" } }
ipaddr
To select devices by IP address, specify the field value as ipaddr and the operand value as an IP address or CIDR block.
{ "filter": { "field": "ipaddr", "operand": "192.168.12.0/28", "operator": "=" } }
node
To select devices by the unique ID of a sensor, specify the field value as node and the operand value as the appliance UUID.
{ "filter": { "field": "node", "operand": "qqvsplfa-zxsk-32l0-19g1-076vfr42pw31", "operator": "=" } }
macaddr
To select devices by MAC address, specify the field value as macaddr and the operand value as the device MAC address. The following example returns results for devices with a MAC address of C1:1C:N2:0Q:PJ:10 or C1:1C:N2:0Q:PJ:11.
{ "filter": { "operator": "or", "rules": [ { "field": "macaddr", "operand": "C1:1C:N2:0Q:PJ:10", "operator": "=" }, { "field": "macaddr", "operand": "C1:1C:N2:0Q:PJ:11", "operator": "=" } ] } }
name
To select devices by display name, specify the field value as name and the operand value as the device name or as a regex string.
{ "filter": { "field": "name", "operand": "VMware B2CEB6", "operator": "=" } }
network_locality_id
To select devices by network locality, specify the field value as network_locality_id and the operand value as a network locality ID.
{ "filter": { "field": "network_locality_id", "operand": 123, "operator": "=" } }
role
To select devices by role, specify the field value as role and the operand value as the device role.
{ "filter": { "field": "role", "operand": "voip_phone", "operator": "=" } }
software
To select devices by the software running on the device, specify the field value as software and the operand value as the ID associated with that software on the ExtraHop system or as a regex string.
{ "filter": { "field": "software", "operand": "windows_10", "operator": "=" } }
Tip: | Programmatically retrieve a list of all software IDs associated with a
device through the GET /devices/{id}/software operation. In the following example response, the id value for the software is windows_10. [ { "software_type": "OS", "name": "Windows", "version": "10", "description": null, "id": "windows_10" } ] |
tag
To select devices by tag, specify the field value as tag and the operand value as the tag name or as a regex string.
{ "filter": { "field": "tag", "operand": "Custom Tag", "operator": "=" } }
Tip: | Programmatically retrieve a list of all device tags through the
GET /devices/{id}/tags operation. In the following example response, the name value for the tag is Custom Tag. [ { "mod_time": 1521577040934, "id": 19, "name": "Custom Tag" } ] |
vlan
To select devices by the ID of a VLAN, specify the field value as vlan and the operand value as the ID of the VLAN.
{ "filter": { "field": "vlan", "operand": "0", "operator": "=" } }
Search with regular expressions (regex)
For certain field values, the string can be in regex syntax. Specify the operand value as an object that has a value parameter with the regex syntax you want to match and an is_regex parameter that is set to true. The following example selects devices with DNS names that end with com.
{ "filter": { "field": "dns_name", "operand": { "value": ".*?com", "is_regex": true }, "operator": "=" } }
An operand field with regex syntax is valid for the following field values:
- cdp_name
- custom_name
- dns_name
- dhcp_name
- model
- name
- netbios_name
- software
- tag
- vendor
Specify multiple criteria
You can specify multiple criteria with the rules field. The following example returns results for devices with an IP address of 192.168.12.0 or 192.168.12.1.
{ "filter": { "operator": "or", "rules": [ { "field": "ipaddr", "operand": "192.168.12.0", "operator": "=" }, { "field": "ipaddr", "operand": "192.168.12.1", "operator": "=" } ] } }
Note: | You cannot specify more than 1000 rules for a device group. |
Detections
The Detections resource enables you to retrieve detections that have been identified by the ExtraHop system.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /detections | Retrieve all detections. |
GET /detections/formats | Retrieve all detection types. |
GET /detections/formats/{id} | Retrieve a specific detection type. |
POST /detections/formats | Create a new custom detection type. |
DELETE /detections/formats/{id} | Delete a specific custom detection type. |
PATCH /detections/formats/{id} | Update a specific custom detection type. |
GET /detections/rules/hiding | Retrieve all tuning rules. |
GET /detections/rules/hiding/{id} | Retrieve a specific tuning rule. |
POST /detections/rules/hiding | Create a tuning rule. |
DELETE /detections/rules/hiding/{id} | Delete a tuning rule. |
PATCH /detections/rules/hiding/{id} | Update a tuning rule. |
POST /detections/search | Retrieve detections that match the specified search criteria. |
PATCH /detections/tickets | Update a ticket associated with detections. |
GET /detections/{id} | Retrieve a specific detection. |
GET /detections/{id}/investigations | Retrieve all investigations that a specific detection is in |
PATCH /detections/{id} | Update a detection. |
DELETE /detections/{id}/notes | Delete the notes for a given detection. |
GET /detections/{id}/notes | Retrieve the notes for a given detection. |
PUT /detections/{id}/notes | Create or replace notes for a given detection. |
GET /detections/{id}/related | Retrieve all detections related to a specific detection. |
Operation details
GET /detections/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the detection.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "appliance_id": 0, "assignee": "string", "categories": [ "string" ], "create_time": 0, "description": "string", "end_time": 0, "id": 0, "is_user_created": true, "mitre_tactics": [], "mitre_techniques": [], "mod_time": 0, "participants": [], "properties": {}, "recommended": true, "recommended_factors": [], "resolution": "string", "risk_score": 0, "start_time": 0, "status": "string", "ticket_id": "string", "ticket_url": "string", "title": "string", "type": "string", "update_time": 0, "url": "string" }
GET /detections
Specify the following parameters.
- limit: Number
- (Optional) Limit the number of detections returned to the specified maximum number. A random selection of detections is returned.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "appliance_id": 0, "assignee": "string", "categories": [ "string" ], "create_time": 0, "description": "string", "end_time": 0, "id": 0, "is_user_created": true, "mitre_tactics": [], "mitre_techniques": [], "mod_time": 0, "participants": [], "properties": {}, "recommended": true, "recommended_factors": [], "resolution": "string", "risk_score": 0, "start_time": 0, "status": "string", "ticket_id": "string", "ticket_url": "string", "title": "string", "type": "string", "update_time": 0, "url": "string" }
POST /detections/search
Specify the following parameters.
- body: Object
- The detection search parameters.
- filter: Object
- Detection-specific filters.
- category: String
- Deprecated. Replaced by the categories field.
- categories: Array of Strings
- Return detections from the specified categories.
- assignee: Array of Strings
- Returns detections assigned to the specified user. Specify ".none" to search for unassigned detections or specify ".me" to search for detections assigned to the authenticated user.
- ticket_id: Array of Strings
- Returns detections that are associated with the specified tickets. Specify ".none" to search for detections that are not associated with tickets.
- status: Array of Strings
- Returns detections with the specified status. To search for detections with a null status, which is displayed in the ExtraHop system as Open, specify ".none". You can only change the status of a detection to "new" through the REST API when third party ticket tracking is enabled.
The following values are valid:
- new
- in_progress
- closed
- acknowledged
- resolution: Array of Strings
- Returns detections for tickets with the specified resolution. Specify ".none" to search for detections without resolutions.
The following values are valid:
- action_taken
- no_action_taken
- types: Array of Strings
- Returns detections with the specified types.
- risk_score_min: Number
- Returns detections with risk scores greater than or equal to the specified value.
- recommended: Boolean
- Returns detections recommended for triage. This field is valid only on a console.
- from: Number
- Returns detections that occurred after the specified date, expressed in milliseconds since the epoch. Detections that started before the specified date are returned if the detection was ongoing at that time.
- limit: Number
- Returns no more than the specified number of detections.
- offset: Number
- The number of detections to skip for pagination.
- sort: Array of Objects
- Sorts returned detections by the specified fields. By default, detections are sorted by most recent update time and then ID in ascending order.
- direction: String
- The order in which returned detections are sorted.
The following values are valid:
- asc
- desc
- field: String
- The field to sort detections by.
- until: Number
- Return detections that ended before the specified date, expressed in milliseconds since the epoch.
- update_time: Number
- Returns detections related to events that occurred after the specified date, expressed in milliseconds since the epoch. Note that the ExtraHop Machine Learning Service analyzes historical data to generate detections, and so there is a time delay between when the events that cause those detections occur and when the detections are generated. If you search for detections in the same update_time window multiple times, the later search might return detections that were not returned by the earlier search.
- mod_time: Number
- Returns detections that were updated after the specified date, expressed in milliseconds since the epoch.
- create_time: Number
- Returns detections that were created after the specified date, expressed in milliseconds since the epoch. For sensors, this returns detections that were generated after the specified date. For consoles, this returns detections that were first synchronized to the console after the specified date.
- id_only: Boolean
- (Optional) Returns only the IDs of the detections.
Specify the body parameter in the following JSON format.
{ "create_time": 0, "filter": { "category": "string", "categories": [], "assignee": [], "ticket_id": [], "status": [], "resolution": [], "types": [], "risk_score_min": 0, "recommended": true }, "from": 0, "id_only": true, "limit": 0, "mod_time": 0, "offset": 0, "sort": { "direction": "string", "field": "string" }, "until": 0, "update_time": 0 }
PATCH /detections/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the detection.
- body: Object
- The detection parameters to update.
- ticket_id: String
- The ID of the ticket associated with the detection.
- assignee: String
- The assignee of the detection or the ticket associated with the detection.
- status: String
- The status of the detection or the ticket associated with the detection. If the value is null, the status displayed in the ExtraHop system is Open. The value "new" can only be specified through the REST API when third party ticket tracking is enabled.
The following values are valid:
- new
- in_progress
- closed
- acknowledged
- resolution: String
- The resolution of the detection or the ticket associated with the detection.
The following values are valid:
- action_taken
- no_action_taken
- participants: Array of Objects
- A list of devices and applications associated with the detection. You can modify specific fields for a participant, but you cannot add new participants to a detection.
- id: Number
- The ID of the participant associated with the detection.
- usernames: Array of Strings
- The usernames associated with the participant through the REST API.
- origins: Array of Strings
- The origin IP addresses associated with the participant through the REST API.
Specify the body parameter in the following JSON format.
{ "assignee": "string", "participants": { "id": 0, "usernames": [], "origins": [] }, "resolution": "string", "status": "string", "ticket_id": "string" }
PATCH /detections/tickets
Specify the following parameters.
- body: Object
- The detection ticketing values to update.
- ticket_id: String
- The ID of the ticket associated with the detection.
- assignee: String
- The assignee of the ticket associated with the detection.
- status: String
- The status of the ticket associated with the detection.
The following values are valid:
- new
- in_progress
- closed
- acknowledged
- resolution: String
- The resolution of the ticket associated with the detection.
The following values are valid:
- action_taken
- no_action_taken
Specify the body parameter in the following JSON format.
{ "assignee": "string", "resolution": "string", "status": "string", "ticket_id": "string" }
GET /detections/{id}/related
Specify the following parameters.
- id: Number
- The ID of the detection to retrieve related detections for.
- from: Number
- Returns detections that occurred after the specified date, expressed in milliseconds since the epoch. Detections that started before the specified date are returned if the detection was ongoing at that time.
- until: Number
- Return detections that ended before the specified date, expressed in milliseconds since the epoch.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "appliance_id": 0, "assignee": "string", "categories": [ "string" ], "create_time": 0, "description": "string", "end_time": 0, "id": 0, "is_user_created": true, "mitre_tactics": [], "mitre_techniques": [], "mod_time": 0, "participants": [], "properties": {}, "recommended": true, "recommended_factors": [], "resolution": "string", "risk_score": 0, "start_time": 0, "status": "string", "ticket_id": "string", "ticket_url": "string", "title": "string", "type": "string", "update_time": 0, "url": "string" }
GET /detections/{id}/investigations
Specify the following parameters.
- id: Number
- The ID of the detection to retrieve related investigations for.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "appliance_id": 0, "assignee": "string", "categories": [ "string" ], "create_time": 0, "description": "string", "end_time": 0, "id": 0, "is_user_created": true, "mitre_tactics": [], "mitre_techniques": [], "mod_time": 0, "participants": [], "properties": {}, "recommended": true, "recommended_factors": [], "resolution": "string", "risk_score": 0, "start_time": 0, "status": "string", "ticket_id": "string", "ticket_url": "string", "title": "string", "type": "string", "update_time": 0, "url": "string" }
GET /detections/formats
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "author": "string", "categories": [], "display_name": "string", "is_user_created": true, "last_updated": 0, "mitre_categories": [], "properties": {}, "released": 0, "status": "string", "type": "string" }
GET /detections/formats/{id}
Specify the following parameters.
- id: String
- The string identifier of the detection format.
- built_in_only: Boolean
- (Optional) If this field is true, returns only built-in detection formats. If this field is false, and both a custom format and a built-in format have the same ID, returns the custom format. The default value is false.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "author": "string", "categories": [], "display_name": "string", "is_user_created": true, "last_updated": 0, "mitre_categories": [], "properties": {}, "released": 0, "status": "string", "type": "string" }
POST /detections/formats
Specify the following parameters.
- body: Object
- The parameters of the detection format.
- type: String
- A string identifier for the detection type. The string can only contain letters, numbers, and underscores. Although detection types are unique across built-in formats, and detection types are unique across custom formats, a built-in and custom format can share the same detection type.
- display_name: String
- The display name of the detection type that appears on the Detections page in the ExtraHop system.
- mitre_categories: Array of Strings
- (Optional) The IDs of the MITRE techniques associated with the detection.
- author: String
- (Optional) The author of the detection format.
- categories: Array of Strings
- (Optional) The list of categories the detection belongs to. For POST and PATCH operations, specify a list with a single string. You cannot specify more than one category for custom detection formats. The "perf" or "sec" category is automatically added to all detection formats.
Specify the body parameter in the following JSON format.
{ "author": "string", "categories": [], "display_name": "string", "mitre_categories": [], "type": "string" }
DELETE /detections/formats/{id}
Specify the following parameters.
- id: String
- The string identifier of the detection format.
PATCH /detections/formats/{id}
Specify the following parameters.
- id: String
- The string identifier of the detection format.
- body: Object
- The parameters of the detection format.
GET /detections/rules/hiding
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "author": "string", "create_time": 0, "description": "string", "detection_type": "string", "detections_hidden": 0, "enabled": true, "expiration": 0, "hide_past_detections": true, "id": 0, "offender": {}, "participants_hidden": 0, "properties": [], "victim": {} }
GET /detections/rules/hiding/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the tuning rule.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "author": "string", "create_time": 0, "description": "string", "detection_type": "string", "detections_hidden": 0, "enabled": true, "expiration": 0, "hide_past_detections": true, "id": 0, "offender": {}, "participants_hidden": 0, "properties": [], "victim": {} }
POST /detections/rules/hiding
Specify the following parameters.
- body: Object
- The tuning rule parameters.
- offender: Object
- The offender that this tuning rule applies to. Specify a detection_hiding_participant object to apply the rule to a specific victim, or specify "Any" to apply the rule to any offender.
- object_type: String
- The type of participant.
The following values are valid:
- device
- device_group
- ipaddr
- locality_type
- network_locality
- hostname
- scanner_service
- object_id: Number
- The ID for the device, device group, or network locality. This option is valid only if the object_type is "device", "device_group", or "network_locality".
- object_value: Array or String
- The IP address or CIDR block of the participant. You can specify a single address or block in a string or multiple addresses or blocks in an array. This option is valid only if the object_type is "ipaddr".
- object_locality: String
- The network locality type of the participant. Specify either "external" or "internal". This option is valid only if the object_type is "locality_type".
The following values are valid:
- internal
- external
- object_scanner: Array or String
- The name of an external scanning service. You can specify a single service in a string or multiple values in an array. You can also specify "Any" to select any scanning service. This option is valid only if the object_type is "scanner_service".
- object_hostname: Array or String
- The hostname of a participant. You can specify a single hostname in a string or multiple hostnames in an array. This option is valid only if the object_type is "hostname".
- victim: Object
- The victim that this tuning rule applies to. Specify a detection_hiding_participant object to apply the rule to a specific victim, or specify "Any" to apply the rule to any victim.
- object_type: String
- The type of participant.
The following values are valid:
- device
- device_group
- ipaddr
- locality_type
- network_locality
- hostname
- scanner_service
- object_id: Number
- The ID for the device, device group, or network locality. This option is valid only if the object_type is "device", "device_group", or "network_locality".
- object_value: Array or String
- The IP address or CIDR block of the participant. You can specify a single address or block in a string or multiple addresses or blocks in an array. This option is valid only if the object_type is "ipaddr".
- object_locality: String
- The network locality type of the participant. Specify either "external" or "internal". This option is valid only if the object_type is "locality_type".
The following values are valid:
- internal
- external
- object_scanner: Array or String
- The name of an external scanning service. You can specify a single service in a string or multiple values in an array. You can also specify "Any" to select any scanning service. This option is valid only if the object_type is "scanner_service".
- object_hostname: Array or String
- The hostname of a participant. You can specify a single hostname in a string or multiple hostnames in an array. This option is valid only if the object_type is "hostname".
- expiration: Number
- The time that the tuning rule expires, expressed in milliseconds since the epoch. A value of null or 0 indicates that the rule does not expire.
- description: String
- (Optional) The description of the tuning rule.
- detection_type: String
- The type of detection that this tuning rule applies to. View a list of valid fields for "type" by running the GET /detections/formats operation. Specify "all_performance" or "all_security" to apply the rule to all performance or all security detections.
- properties: Array of Objects
- (Optional) The filter criteria for detection properties.
- property: String
- The name of the property to filter.
- operator: String
- The compare method applied when matching the operand value against the detection property value.
The following values are valid:
- =
- !=
- ~
- !~
- in
- operand: String or Number or Object
- The value that the filter attempts to match. The filter compares the value of the operand to the value of the detection property and applies the compare method specified by the operator parameter. You can specify the operand as a string, integer, or object. For more information, see the REST API Guide.
Specify the body parameter in the following JSON format.
{ "description": "string", "detection_type": "string", "expiration": 0, "offender": { "object_type": "string", "object_id": 0, "object_value": "array", "object_locality": "string", "object_scanner": "array", "object_hostname": "array" }, "properties": { "property": "string", "operator": "string", "operand": "string" }, "victim": { "object_type": "string", "object_id": 0, "object_value": "array", "object_locality": "string", "object_scanner": "array", "object_hostname": "array" } }
PATCH /detections/rules/hiding/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the tuning rule.
- body: Object
- The tuning rule fields to update.
- enabled: Boolean
- Indicates whether the tuning rule is enabled.
- expiration: Number
- The time that the tuning rule expires, expressed in milliseconds since the epoch. A value of null or 0 indicates that the rule does not expire.
- description: String
- The description of the tuning rule.
- offender: Object
- The offender that this tuning rule applies to. Specify a detection_hiding_participant object to apply the rule to a specific victim, or specify "Any" to apply the rule to any offender.
- object_type: String
- The type of participant.
The following values are valid:
- device
- device_group
- ipaddr
- locality_type
- network_locality
- hostname
- scanner_service
- object_id: Number
- The ID for the device, device group, or network locality. This option is valid only if the object_type is "device", "device_group", or "network_locality".
- object_value: Array or String
- The IP address or CIDR block of the participant. You can specify a single address or block in a string or multiple addresses or blocks in an array. This option is valid only if the object_type is "ipaddr".
- object_locality: String
- The network locality type of the participant. Specify either "external" or "internal". This option is valid only if the object_type is "locality_type".
The following values are valid:
- internal
- external
- object_scanner: Array or String
- The name of an external scanning service. You can specify a single service in a string or multiple values in an array. You can also specify "Any" to select any scanning service. This option is valid only if the object_type is "scanner_service".
- object_hostname: Array or String
- The hostname of a participant. You can specify a single hostname in a string or multiple hostnames in an array. This option is valid only if the object_type is "hostname".
- victim: Object
- The victim that this tuning rule applies to. Specify a detection_hiding_participant object to apply the rule to a specific victim, or specify "Any" to apply the rule to any victim.
- object_type: String
- The type of participant.
The following values are valid:
- device
- device_group
- ipaddr
- locality_type
- network_locality
- hostname
- scanner_service
- object_id: Number
- The ID for the device, device group, or network locality. This option is valid only if the object_type is "device", "device_group", or "network_locality".
- object_value: Array or String
- The IP address or CIDR block of the participant. You can specify a single address or block in a string or multiple addresses or blocks in an array. This option is valid only if the object_type is "ipaddr".
- object_locality: String
- The network locality type of the participant. Specify either "external" or "internal". This option is valid only if the object_type is "locality_type".
The following values are valid:
- internal
- external
- object_scanner: Array or String
- The name of an external scanning service. You can specify a single service in a string or multiple values in an array. You can also specify "Any" to select any scanning service. This option is valid only if the object_type is "scanner_service".
- object_hostname: Array or String
- The hostname of a participant. You can specify a single hostname in a string or multiple hostnames in an array. This option is valid only if the object_type is "hostname".
- properties: Array of Objects
- The filter criteria for detection properties.
- property: String
- The name of the property to filter.
- operator: String
- The compare method applied when matching the operand value against the detection property value.
The following values are valid:
- =
- !=
- ~
- !~
- in
- operand: String or Number or Object
- The value that the filter attempts to match. The filter compares the value of the operand to the value of the detection property and applies the compare method specified by the operator parameter. You can specify the operand as a string, integer, or object. For more information, see the REST API Guide.
Specify the body parameter in the following JSON format.
{ "description": "string", "enabled": true, "expiration": 0, "offender": { "object_type": "string", "object_id": 0, "object_value": "array", "object_locality": "string", "object_scanner": "array", "object_hostname": "array" }, "properties": { "property": "string", "operator": "string", "operand": "string" }, "victim": { "object_type": "string", "object_id": 0, "object_value": "array", "object_locality": "string", "object_scanner": "array", "object_hostname": "array" } }
DELETE /detections/rules/hiding/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the tuning rule.
GET /detections/{id}/notes
Specify the following parameters.
- id: Number
- The unique identifier for the detection.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "author": "string", "note": "string", "update_time": 0 }
Operand values for detection property tuning rules
The POST /detections/rules/hiding operation enables you to create tuning rules that filter detections based on detection properties. You can specify filtering criteria for detection properties in objects. Each object should contain a unique value for the operand field that is valid for the specified property value.
Tip: | You can retrieve valid property values through the GET
/detections/formats operation. See the keys of the
properties object in the response. In the following example,
the property value is s3_bucket:
"properties": { "s3_bucket": { "is_optional": true, "status": "active", "is_tunable": true, "data_type": "string" } } The is_tunable field indicates whether you can create a tuning rule based on the property. |
registered_domain_name
To hide rules by a registered domain name, specify the property value as registered_domain_name and the operand value as a domain name.
The following example rule hides DNS Tunnel detections for example.com.
{ "detection_type": "dns_tunnel", "expiration": null, "offender": "Any", "victim": "Any", "properties": [ { "operand": "example.com", "operator": "=", "property": "registered_domain_name" } ] }
uris
To hide rules by a URI, specify the property value as uris and the operand value as a URI.
The following example rule hides SQL Injection (SQLi) Attack detections for http://example.com/test.
{ "detection_type": "sqli_attack", "expiration": null, "offender": "Any", "victim": "Any", "properties": [ { "operand": "http://example.com/test", "operator": "=", "property": "uris" } ] }
top_level_domain
To hide rules by a top-level domain name, specify the property value as top_level_domain and the operand value as a top-level domain name.
The following example rule hides Suspicious Top-level Domain detections for the org top-level domain.
{ "detection_type": "suspicious_tld", "expiration": null, "offender": "Any", "victim": "Any", "properties": [ { "operand": "org", "operator": "=", "property": "top_level_domain" } ] }
Search with regular expressions (regex)
For certain property values, the string can be in regex syntax. Specify the operand value as an object that has a value parameter with the regex syntax you want to match and an is_regex parameter that is set to true. The following rule filters DNS Tunnel detections with domain names that end with example.com.
{ "detection_type": "dns_tunnel", "expiration": null, "offender": "Any", "victim": "Any", "properties": [ { "operand": { "value": ".*?example.com", "is_regex": true }, "operator": "=", "property": "registered_domain_name" } ] }
Disable case sensitivity
By default, searches for string property values are case-sensitive. However, you can disable case sensitivity by specifying the operand value as an object that has a case_sensitive parameter that is set to false.
The following rule hides Hacking Tool Domain Access detections with the ArchStrike hacking tool.
{ "detection_type": "hacking_tools", "expiration": null, "offender": "Any", "victim": "Any", "properties": [ { "operand": { "value": "archstrike", "case_sensitive": false }, "operator": "=", "property": "hacking_tool" } ] }
Detection categories
The categories field is an array returned in responses for GET /detections and POST /detections/search operations. The following table lists valid entries in the array:
Value | Category |
---|---|
sec | Security |
sec.action | Actions on Objective |
sec.attack | Attack |
sec.botnet | Botnet |
sec.caution | Caution |
sec.command | Command & Control |
sec.cryptomining | Cryptomining |
sec.dos | Denial of Service |
sec.exfil | Exfiltration |
sec.exploit | Exploitation |
sec.hardening | Hardening |
sec.lateral | Lateral Movement |
sec.ransomware | Ransomware |
sec.recon | Reconnaissance |
perf | Performance |
perf.auth | Authorization & Access Control |
perf.db | Database |
perf.network | Network Infrastructure |
perf.service | Service Degradation |
perf.storage | Storage |
perf.virtual | Desktop & App Virtualization |
perf.web | Web Application |
Email group
You can add individual or group email addresses to an email group and assign them to a system alert. When that alert is triggered, the system sends an email to all of the addresses in the email group.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /emailgroups | Retrieve all email groups. |
POST /emailgroups | Create a new email group. |
DELETE /emailgroups/{id} | Delete a email group by a unique identifier. |
GET /emailgroups/{id} | Retrieve a specific email group by a unique identifier. |
PATCH /emailgroups/{id} | Apply updates to a specific email group. |
Operation details
GET /emailgroups
If the request is successful, the ExtraHop system returns an object in the following format.
{ "email_addresses": [], "group_name": "string", "id": 0, "system_notifications": true }
POST /emailgroups
Specify the following parameters.
- body: Object
- Apply the specified property values to the new email group.
- group_name: String
- The friendly name for the email group.
- email_addresses: Array of Strings
- The list of email addresses in the email group.
- system_notifications: Boolean
- Indicates whether that the group should receive system notifications.
Specify the body parameter in the following JSON format.
{ "email_addresses": [], "group_name": "string", "system_notifications": true }
GET /emailgroups/{id}
Specify the following parameters.
- id: Number
- The unique identifier of the email group.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "email_addresses": [], "group_name": "string", "id": 0, "system_notifications": true }
Exclusion intervals
An exclusion interval can be created to set a time period to suppress an alert.
For example, if you do not want to be notified about alerts after hours or on the weekends, an exclusion interval can create a rule to suppress the alert during that time period. For more information, see Alerts.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /exclusionintervals | Retrieve all exclusion intervals. |
POST /exclusionintervals | Create a new exclusion interval. |
DELETE /exclusionintervals/{id} | Delete a specific exclusion interval. |
GET /exclusionintervals/{id} | Retrieve a specific exclusion interval. |
PATCH /exclusionintervals/{id} | Apply updates to a specific exclusion interval. |
Operation details
GET /exclusionintervals
If the request is successful, the ExtraHop system returns an object in the following format.
{ "alert_apply_all": true, "author": "string", "description": "string", "end": 0, "id": 0, "interval_type": "string", "mod_time": 0, "name": "string", "start": 0, "trend_apply_all": true }
POST /exclusionintervals
Specify the following parameters.
- body: Object
- Set the specified property values on the new exclusion interval.
- name: String
- The friendly name for the exclusion interval.
- author: String
- (Optional) The name of the creator of the exclusion interval.
- description: String
- (Optional) An optional description of the exclusion interval.
- interval_type: String
- The time window when the exclusion interval was evaluated.
The following values are valid:
- onetime
- weekly
- daily
- start: Number
- The start of the exclusion interval time range, expressed in seconds. This value is relative to the epoch for onetime exclusions, relative to midnight for daily exclusions, and relative to Monday at midnight for weekly exclusions.
- end: Number
- The end of the exclusion interval time range, expressed in seconds. This value is relative to the epoch for onetime exclusions, relative to midnight for daily exclusions, and relative to Monday at midnight for weekly exclusions.
- alert_apply_all: Boolean
- Indicates whether this exclusion interval should be applied to all alerts.
- trend_apply_all: Boolean
- Indicates whether this exclusion interval should be applied to all trends.
Specify the body parameter in the following JSON format.
{ "alert_apply_all": true, "author": "string", "description": "string", "end": 0, "interval_type": "string", "name": "string", "start": 0, "trend_apply_all": true }
GET /exclusionintervals/{id}
Specify the following parameters.
- id: Number
- The unique identifier of the exclusion interval.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "alert_apply_all": true, "author": "string", "description": "string", "end": 0, "id": 0, "interval_type": "string", "mod_time": 0, "name": "string", "start": 0, "trend_apply_all": true }
ExtraHop
This resource provides metadata about the ExtraHop system.
The following table displays all of the operations you can perform on this resource:
Operation | Description | ||
---|---|---|---|
GET /extrahop | Retrieve metadata about the firmware running on the ExtraHop system. | ||
POST /extrahop/cloudresources | Manually update resources on the ExtraHop system. These resources are automatically updated when the system is connected to ExtraHop Cloud Services. | ||
GET /extrahop/cluster | Retrieve Explore cluster configuration settings. | ||
PATCH /extrahop/cluster | Update Explore cluster configuration settings. | ||
GET /extrahop/detections/access | Retrieve the detections access control settings. | ||
PUT /extrahop/detections/access | Update detections access control settings. | ||
GET /extrahop/edition | Retrieve the edition of the ExtraHop system.
|
||
POST /extrahop/firmware | Upload a new firmware image to the ExtraHop system. For more information, see Upgrade ExtraHop firmware through the REST API. | ||
POST /extrahop/firmware/download/url | Download a new firmware image onto the ExtraHop system from a URL. | ||
POST /extrahop/firmware/download/version | Download a new firmware image onto the ExtraHop system from ExtraHop Cloud Services. | ||
POST /extrahop/firmware/latest/upgrade | Upgrade the ExtraHop system to the most recently uploaded firmware image. | ||
GET /extrahop/firmware/next | Upgrade the ExtraHop system to the most recently uploaded firmware image. | ||
GET /extrahop/firmware/previous | Retrieve information about a firmware version that you can roll back the ExtraHop system to. | ||
POST /extrahop/firmware/previous/rollback | Roll back the ExtraHop system to the previous firmware version. | ||
GET /extrahop/flowlogs/secret | Retrieve the flow log secret. | ||
POST /extrahop/flowlogs/secret | Generate a new flow log secret. | ||
GET /extrahop/idrac | Retrieve the iDRAC IP address of the ExtraHop system. | ||
GET /extrahop/platform | Retrieve the platform name of the ExtraHop system.
|
||
GET /extrahop/processes | Retrieve a list of processes running on the ExtraHop system. | ||
POST /extrahop/processes/{process}/restart | Restart a process running on the ExtraHop system. | ||
GET /extrahop/services | Retrieve settings for all services. | ||
PATCH /extrahop/services | Update the settings for services. | ||
POST /extrahop/restart | Restart the ExtraHop system. | ||
POST /extrahop/shutdown | Shut down the ExtraHop system. | ||
POST /extrahop/sslcert | Regenerate the TLS certificate on the ExtraHop system. For more information, see Create a trusted TLS certificate through the REST API | ||
PUT /extrahop/sslcert | Replace the TLS certificate on the ExtraHop system. | ||
POST /extrahop/sslcert/signingrequest | Create an TLS certificate signing request. For more information, see Create a trusted TLS certificate through the REST API. | ||
GET /extrahop/ticketing | Retrieve the ticketing integration status. | ||
PATCH /extrahop/ticketing | Enable or disable ticketing integration. | ||
GET /extrahop/version | Retrieve the version of the firmware running on the ExtraHop system.
|
Operation details
GET /extrahop/version
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "version": "string" }
GET /extrahop/platform
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "platform": "string" }
GET /extrahop/edition
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "edition": "string" }
GET /extrahop
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "display_host": "string", "external_hostname": "string", "hostname": "string", "mgmt_ipaddr": "string", "platform": "string", "version": "string" }
GET /extrahop/idrac
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "ipaddr": "string" }
PUT /extrahop/sslcert
Specify the following parameters.
- body: String
- The SSL certificate and optionally the private key. Enter as plain text, separated with a line break.
POST /extrahop/sslcert/signingrequest
Specify the following parameters.
- body: Object
- Parameters for the SSL certificate signing request.
- subject_alternative_names: Array of Objects
- A list of names that the certificate applies to, such as {"type": "dns", "name": "www.example.com"}.
- type: String
- Type of Subject Alternative Name.
The following values are valid:
- dns
- ip
- name: String
- Name of Subject Alternative Name.
- subject: Object
- The subject of the SSL certificate. For a list of certificate subject fields, see below.
- common_name: String
- The subject common name (CN).
- country_code: String
- (Optional) The subject country (C).
- state_or_province_name: String
- (Optional) The subject state or province (ST).
- locality_name: String
- (Optional) The subject locality (L).
- organization_name: String
- (Optional) The subject organization (O).
- organizational_unit_name: String
- (Optional) The subject organizational unit (OU).
- email_address: String
- (Optional) The subject e-mail address (emailAddress).
Specify the body parameter in the following JSON format.
{ "subject": { "common_name": "string", "country_code": "string", "state_or_province_name": "string", "locality_name": "string", "organization_name": "string", "organizational_unit_name": "string", "email_address": "string" }, "subject_alternative_names": { "type": "string", "name": "string" } }
GET /extrahop/ticketing
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "enabled": true, "external_ticketing_enabled": true, "internal_ticketing_enabled": true, "url_template": "string" }
PATCH /extrahop/ticketing
Specify the following parameters.
- body: Object
- Ticket tracking settings.
- enabled: Boolean
- (Optional) Deprecated. Replaced by the external_ticketing_enabled and internal_ticketing_enabled fields.
- external_ticketing_enabled: Boolean
- (Optional) Indicates whether detections are tracked from an external ticketing system. This field is required if the internal_ticketing_enabled field is specified.
- internal_ticketing_enabled: Boolean
- (Optional) Indicates whether detections are tracked from within the ExtraHop System. This field is required if the external_ticketing_enabled field is specified.
- url_template: String
- (Optional) The URL template that links detections to external tickets. The template must include the $ticket_id variable. This field applies only if detections are tracked from an external ticketing system.
Specify the body parameter in the following JSON format.
{ "enabled": true, "external_ticketing_enabled": true, "internal_ticketing_enabled": true, "url_template": "string" }
PUT /extrahop/detections/access
Specify the following parameters.
- body: Object
- The detections access settings for the appliance.
- enabled: Boolean
- Indicates whether detections access settings are enabled. When enabled, administrators can restrict detections access for specified users. You cannot disable detections access settings after the settings are enabled.
Specify the body parameter in the following JSON format.
{ "enabled": true }
GET /extrahop/detections/access
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "enabled": true }
POST /extrahop/firmware
Specify the following parameters.
- firmware: Filename
- The .tar file that contains the firmware image. Note: You cannot upload a firmware image through the REST API explorer. For more information about how to upload an image through cURL or a Python script, see Upgrade ExtraHop firmware through the REST API.
POST /extrahop/firmware/latest/upgrade
Specify the following parameters.
- body: Object
- (Optional) The installation options for upgrading the appliance.
- restart_after: Boolean
- (Optional) Indicates whether to restart the appliance after the upgrade is complete.
- silent: Boolean
- (Optional) Specifies whether to disable the ExtraHop Web UI during the upgrade process. If an upgrade fails, the appliance will automatically revert to the previous firmware version.
- force: Boolean
- (Optional) Specifies whether to skip compatibility verification. Skip verification only if ExtraHop Support has reviewed and approved the upgrade.
Specify the body parameter in the following JSON format.
{ "force": true, "restart_after": true, "silent": true }
POST /extrahop/firmware/download/url
Specify the following parameters.
- body: Object
- The download options.
- firmware_url: String
- The URL of the firmware to download. HTTPS, HTTP, and FTP schemes are supported.
- upgrade: Boolean
- (Optional) Specifies whether to upgrade the appliance after the firmware download is complete.
- force: Boolean
- (Optional) Specifies whether to skip compatibility verification. Skip verification only if ExtraHop Support has reviewed and approved the upgrade.
Specify the body parameter in the following JSON format.
{ "firmware_url": "string", "force": true, "upgrade": true }
GET /extrahop/services
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "admin": { "enabled": true }, "keyreceiver": { "enabled": true }, "snmp": { "enabled": true }, "ssh": { "enabled": true } }
PATCH /extrahop/services
Specify the following parameters.
- body: Object
- The settings for services.
- admin: Object
- (Optional) The settings of the Management GUI service, which provides browser-based access to the appliance.
- enabled: Boolean
- Indicates whether the service is enabled.
- snmp: Object
- (Optional) The settings of the SNMP service, which enables your network device monitoring software to collect information from the ExtraHop System.
- enabled: Boolean
- Indicates whether the service is enabled.
- ssh: Object
- (Optional) The settings of the SSH service, which enables users to securely log in to the ExtraHop command-line interface (CLI).
- enabled: Boolean
- Indicates whether the service is enabled.
- keyreceiver: Object
- (Optional) The settings of the SSL Session Key Receiver, which enables the appliance to receive and decrypt session keys from the session key forwarder.
- enabled: Boolean
- Indicates whether the service is enabled.
Specify the body parameter in the following JSON format.
{ "admin": { "enabled": true }, "keyreceiver": { "enabled": true }, "snmp": { "enabled": true }, "ssh": { "enabled": true } }
GET /extrahop/processes
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "can_restart": true, "cpu": 0.0, "cpu_time": 0, "mem_percent": 0.0, "mem_res": 0, "mem_virt": 0, "process": "string", "start_time": 0 }
POST /extrahop/processes/{process}/restart
Specify the following parameters.
- process: String
- The name of the process.
The following values are valid:
- exadmin
- exalerts
- examf
- exapi
- exbridge
- excap
- exconfig
- exflowlogs
- exsnmpq
- exnotify
- exportal
- exremote
- exsearch
- exstatmirror
- extrend
- webserver
- hopcloud-api
GET /extrahop/cluster
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "ingest_enabled": true, "replication_policy": 0 }
PATCH /extrahop/cluster
Specify the following parameters.
- body: Object
- The EXA cluster configuration settings.
- ingest_enabled: Boolean
- (Optional) Indicates whether record ingest is enabled for the Explore cluster.
- replication_policy: Number
- (Optional) The replication level that determines how many copies of each record are stored.
Specify the body parameter in the following JSON format.
{ "ingest_enabled": true, "replication_policy": 0 }
GET /extrahop/firmware/previous
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "backup_time": 0, "version": "string" }
POST /extrahop/cloudresources
Specify the following parameters.
- cloudresources: Filename
- The resource bundle file.
GET /extrahop/flowlogs/secret
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "secret": "string" }
GET /extrahop/firmware/next
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "current_release": true, "release": "string", "versions": [] }
POST /extrahop/firmware/download/version
Specify the following parameters.
- body: Object
- (Optional) The download options.
- version: String
- The version of the firmware to download.
- upgrade: Boolean
- (Optional) Specifies whether to upgrade the appliance after the firmware download is complete.
Specify the body parameter in the following JSON format.
{ "upgrade": true, "version": "string" }
Investigations
Investigations enable you to add and view multiple detections in a single timeline and map. For more information, see Investigations.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /investigations | Retrieve all investigations. |
POST /investigations | Create an investigation. |
POST /investigations/search | Search for investigations. |
DELETE /investigations/{id} | Delete a specific investigation. |
GET /investigations/{id} | Retrieve a specific investigation. |
PATCH /investigations/{id} | Update an investigation. |
Operation details
GET /investigations/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the investigation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "assessment": "string", "assignee": "string", "created_by": "string", "creation_time": 0, "description": "string", "detections": [ "string" ], "end_time": 0, "id": 0, "investigation_types": [ "string" ], "is_user_created": true, "last_interaction_by": "string", "name": "string", "notes": "string", "start_time": 0, "status": "string", "update_time": 0, "url": "string" }
GET /investigations
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "assessment": "string", "assignee": "string", "created_by": "string", "creation_time": 0, "description": "string", "detections": [ "string" ], "end_time": 0, "id": 0, "investigation_types": [ "string" ], "is_user_created": true, "last_interaction_by": "string", "name": "string", "notes": "string", "start_time": 0, "status": "string", "update_time": 0, "url": "string" }
POST /investigations/search
Specify the following parameters.
- body: Object
- The parameters for the investigation.
- update_time: Number
- Returns investigations that were updated after the specified date, expressed in milliseconds since the epoch.
- creation_time: Number
- Returns investigations that were created after the specified date, expressed in milliseconds since the epoch.
- is_user_created: Boolean
- (Optional) Returns only investigations that were created manually by a user.
Specify the body parameter in the following JSON format.
{ "creation_time": 0, "is_user_created": true, "update_time": 0 }
PATCH /investigations/{id}
Specify the following parameters.
- id: Number
- The ID of the investigation to update.
- body: Object
- The investigation fields to update.
- name: String
- (Optional) The name of the investigation.
- status: String
- (Optional) The status of the investigation.
The following values are valid:
- open
- in_progress
- closed
- notes: String
- (Optional) Optional notes about the investigation.
- event_ids: Array of Numbers
- (Optional) The list of IDs for detections in the investigation. If you specify this field, the new list of IDs replaces the existing list.
- assignee: String
- (Optional) The username of the investigation assignee.
- assessment: String
- (Optional) The assessment of the investigation.
The following values are valid:
- malicious_true_positive
- benign_true_positive
- false_positive
- undecided
Specify the body parameter in the following JSON format.
{ "assessment": "string", "assignee": "string", "event_ids": [], "name": "string", "notes": "string", "status": "string" }
POST /investigations
Specify the following parameters.
- body: Object
- The fields of the new investigation.
- name: String
- The name of the investigation.
- status: String
- (Optional) The status of the investigation.
The following values are valid:
- open
- in_progress
- closed
- notes: String
- (Optional) Optional notes about the investigation.
- event_ids: Array of Numbers
- (Optional) The list of IDs for detections in the investigation.
- assignee: String
- (Optional) The username of the investigation assignee.
- assessment: String
- (Optional) The assessment of the investigation.
The following values are valid:
- malicious_true_positive
- benign_true_positive
- false_positive
- undecided
Specify the body parameter in the following JSON format.
{ "assessment": "string", "assignee": "string", "event_ids": [], "name": "string", "notes": "string", "status": "string" }
Jobs
You can monitor the progress of some administration jobs started through the REST API. If a REST request creates a job, the job ID is returned in the location header of the response. The following operations create jobs:
- POST /extrahop/firmware/latest/upgrade
- POST /extrahop/sslcert
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /jobs | Retrieve the status of all jobs. |
GET /jobs/{id} | Retrieve the status of a specific job. |
Operation details
GET /jobs/{id}
Specify the following parameters.
- id: String
- The unique identifier for the job.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "details": "string", "id": "string", "remote_jobs": [], "status": "string", "step_description": "string", "step_number": 0, "total_steps": 0, "type": "string" }
GET /jobs
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "details": "string", "id": "string", "remote_jobs": [], "status": "string", "step_description": "string", "step_number": 0, "total_steps": 0, "type": "string" }
Job types
The GET /jobs operation returns the following values in the type field of the response.
- extrahop_firmware_download
- The ExtraHop system is downloading a new firmware image from either a URL or ExtraHop Cloud Services.
- extrahop_firmware_upgrade
- The ExtraHop system is upgrading to a new firmware version.
- extrahop_firmware_download_upgrade
- The ExtraHop system is downloading a firmware image and upgrading to a new firmware version. The image is retrieved from either a URL or ExtraHop Cloud Services.
Note: | The type field is empty for some jobs. |
License
This resource enables you to retrieve and set product keys or to retrieve and set a license.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /license | Retrieve the license applied to this ExtraHop system. |
PUT /license | Apply and register a new license to the ExtraHop system. |
GET /license/productkey | Retrieve the product key to this ExtraHop system. |
PUT /license/productkey | Apply the specified product key to the ExtraHop system and register the license. |
Operation details
PUT /license
Specify the following parameters.
- body: String
- (Optional) The license text provided to you by ExtraHop Support, including the BEGIN and END lines.
GET /license
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "dossier": "string", "edition": "string", "expires_at": 0, "expires_in": 0, "modules": {}, "options": {}, "platform": "string", "product_key": "string", "serial": "string" }
Metrics
Metrics information is collected about every object identified by the ExtraHop system.
Note that metrics are retrieved through the POST method, which creates a query to collect the requested information through the API. For more information, see Extract metrics through the REST API.
The following table displays all of the operations you can perform on this resource:
Operation | Description | ||
---|---|---|---|
POST /metrics | Retrieves metrics for each specified object. | ||
GET /metrics/next/{xid} | If you request metrics from a console with the
POST /metrics, POST /metrics/total, or
POST /metrics/totalbyobject operation, and you specify objects that
have been observed by multiple sensors, the response contains the xid
field, rather than metric data. You can retrieve metric data by specifying the
xid field in the GET /metrics/next/{xid}
operation, which returns metrics from one of the sensors connected to the
console. Repeat the GET /metrics/next/{xid} operation to return metrics from additional sensors. After all metrics are retrieved, the operation returns null. If metrics are not yet available from the sensor, the string again is returned. Wait a few seconds and then try again.
|
||
POST /metrics/total | Retrieves combined metric totals for all specified objects. | ||
POST /metrics/totalbyobject | Retrieves metric totals for each specified object. |
For example, the following request body retrieves HTTP responses that two devices sent over the last 30 minutes.
{ "cycle": "auto", "from": -1800000, "metric_category": "http_server", "metric_specs": [ { "name": "rsp" } ], "object_ids": [ 180, 177 ], "object_type": "device", "until": 0 }
For the POST /metrics operation, the previous example request body returns counts of HTTP responses that occurred during each time interval, labeled with the time of each event and the ID of the device that sent the responses, similar to the following example response:
{ "cycle": "30sec", "node_id": 0, "clock": 1709659320000, "from": 1709657520000, "until": 1709659320000, "stats": [ { "oid": 177, "time": 1709657520000, "duration": 30000, "values": [ 4 ] }, { "oid": 177, "time": 1709657550000, "duration": 30000, "values": [ 4 ] }, { "oid": 180, "time": 1709657520000, "duration": 30000, "values": [ 4 ] }, { "oid": 180, "time": 1709657550000, "duration": 30000, "values": [ 4 ] } ] }
For the POST /metrics/totalbyobject operation, the same previous example request body retrieves the combined total for each device over the entire time period, similar to the following example response:
{ "cycle": "30sec", "node_id": 0, "clock": 1709659620000, "from": 1709657820000, "until": 1709659620000, "stats": [ { "oid": 180, "time": 1709659620000, "duration": 1830000, "values": [ 8 ] }, { "oid": 177, "time": 1709659620000, "duration": 1830000, "values": [ 8 ] } ] }
For the POST /metrics/total operation, the same previous example request body retrieves the combined total of both devices over the entire time period, similar to the following example response:
{ "cycle": "30sec", "node_id": 0, "clock": 1709659830000, "from": 1709658030000, "until": 1709659830000, "stats": [ { "oid": -1, "time": 1709659830000, "duration": 1830000, "values": [ 16 ] } ] }
Note that the behavior of the /metrics/total and /metrics/totalbyobject endpoints depends on the type of the metric. For count metrics, the values field contains a sum total of values over the specified time interval, as shown in the example above. However, for dataset metrics, the values field contains a list of values and the frequency that those values appeared. For example, a query for server processing times with the POST /metrics/total operation returns a response similar to the following example:
{ "cycle": "30sec", "node_id": 0, "clock": 1494541440000, "from": 1494539640000, "until": 1494541440000, "stats": [ { "oid": -1, "time": 1494541380000, "duration": 1800000, "values": [ [ { "value": 2.271, "freq": 5 }, { "value": 48.903, "freq": 1 } ] ] } ] }
If there are more than 1,000 distinct dataset values over the specified time period, similar values are consolidated to reduce the response to 1,000 values. For example, if there are less than 1,000 values, the response might contain the following entries:
{ "value": 2.571, "freq": 4 }, { "value": 2.912, "freq": 2 }
However, if the response contains more than 1,000 values, those entries might be consolidated into the following entry:
{ "value": 2.571, "freq": 6 }
If the calc_type field is specified and the response contains more than 1,000 values, the percentile or mean is calculated according to the consolidated dataset.
Operation details
POST /metrics
Specify the following parameters.
- body: Object
- The description of the metric request.
- from: Number
- The beginning timestamp for the request. Return only metrics collected after this time. Time is expressed in milliseconds since the epoch. 0 indicates the time of the request. A negative value is evaluated relative to the current time. The default unit for a negative value is milliseconds, but other units can be specified with a unit suffix. See the REST API Guide for supported time units and suffixes.
- until: Number
- The ending timestamp for the request. Return only metrics collected before this time. Follows the same time value guidelines as the from parameter.
- cycle: String
- The aggregation period for metrics.
The following values are valid:
- auto
- 1sec
- 30sec
- 5min
- 1hr
- 24hr
- object_type: String
- Indicates the object type of unique identifiers specified in the object_ids property.
The following values are valid:
- network
- device
- application
- vlan
- device_group
- system
- object_ids: Array of Numbers
- The list of numeric values that represent unique identifiers. Unique identifiers can be retrieved through the /networks, /devices, /applications, /vlans, /devicegroups, /activitygroups, and /appliances resources. For system health metrics, specify the ID of the sensor or console and set the object_type parameter to "system".
- metric_category: String
- The group of metrics that are searchable in the metric catalog.
- metric_specs: Array of Objects
- An array of metric specification objects.
- name: String
- The field name for the metric. When filtering in the metric catalog on a metric_category, each result is a potential metric_spec name. When a result is selected from the catalog, the "Metric" field value is a valid option for this field.
- key1: String
- (Optional) Filter detail metrics. Detail metrics break down data through keys, which are strings or IP addresses. For example, the metric "HTTP Requests by Method" accepts a key1 value of "GET." Keys can also be regular expressions that are delimited with forward slashes ("/GET/").
- key2: String
- (Optional) Enable additional filtering on detail metrics.
- calc_type: String
- (Optional) The type of calculation to perform.
The following values are valid:
- mean
- percentiles
- percentiles: Array of Numbers
- (Optional) The list of percentiles, sorted in ascending order, which should be returned. This parameter is only required if the calc_type parameter is set to "percentiles". If the calc_type parameter is set to mean, the percentiles property cannot be set.
Specify the body parameter in the following JSON format.
{ "cycle": "string", "from": 0, "metric_category": "string", "metric_specs": { "name": "string", "key1": "string", "key2": "string", "calc_type": "string", "percentiles": [] }, "object_ids": [], "object_type": "string", "until": 0 }
POST /metrics/total
Specify the following parameters.
- body: Object
- The description of the metric request.
- from: Number
- The beginning timestamp for the request. Return only metrics collected after this time. Time is expressed in milliseconds since the epoch. 0 indicates the time of the request. A negative value is evaluated relative to the current time. The default unit for a negative value is milliseconds, but other units can be specified with a unit suffix. See the REST API Guide for supported time units and suffixes.
- until: Number
- The ending timestamp for the request. Return only metrics collected before this time. Follows the same time value guidelines as the from parameter.
- cycle: String
- The aggregation period for metrics.
The following values are valid:
- auto
- 1sec
- 30sec
- 5min
- 1hr
- 24hr
- object_type: String
- Indicates the object type of unique identifiers specified in the object_ids property.
The following values are valid:
- network
- device
- application
- vlan
- device_group
- system
- object_ids: Array of Numbers
- The list of numeric values that represent unique identifiers. Unique identifiers can be retrieved through the /networks, /devices, /applications, /vlans, /devicegroups, /activitygroups, and /appliances resources. For system health metrics, specify the ID of the sensor or console and set the object_type parameter to "system".
- metric_category: String
- The group of metrics that are searchable in the metric catalog.
- metric_specs: Array of Objects
- An array of metric specification objects.
- name: String
- The field name for the metric. When filtering in the metric catalog on a metric_category, each result is a potential metric_spec name. When a result is selected from the catalog, the "Metric" field value is a valid option for this field.
- key1: String
- (Optional) Filter detail metrics. Detail metrics break down data through keys, which are strings or IP addresses. For example, the metric "HTTP Requests by Method" accepts a key1 value of "GET." Keys can also be regular expressions that are delimited with forward slashes ("/GET/").
- key2: String
- (Optional) Enable additional filtering on detail metrics.
- calc_type: String
- (Optional) The type of calculation to perform.
The following values are valid:
- mean
- percentiles
- percentiles: Array of Numbers
- (Optional) The list of percentiles, sorted in ascending order, which should be returned. This parameter is only required if the calc_type parameter is set to "percentiles". If the calc_type parameter is set to mean, the percentiles property cannot be set.
Specify the body parameter in the following JSON format.
{ "cycle": "string", "from": 0, "metric_category": "string", "metric_specs": { "name": "string", "key1": "string", "key2": "string", "calc_type": "string", "percentiles": [] }, "object_ids": [], "object_type": "string", "until": 0 }
POST /metrics/totalbyobject
Specify the following parameters.
- body: Object
- The description of the metric request.
- from: Number
- The beginning timestamp for the request. Return only metrics collected after this time. Time is expressed in milliseconds since the epoch. 0 indicates the time of the request. A negative value is evaluated relative to the current time. The default unit for a negative value is milliseconds, but other units can be specified with a unit suffix. See the REST API Guide for supported time units and suffixes.
- until: Number
- The ending timestamp for the request. Return only metrics collected before this time. Follows the same time value guidelines as the from parameter.
- cycle: String
- The aggregation period for metrics.
The following values are valid:
- auto
- 1sec
- 30sec
- 5min
- 1hr
- 24hr
- object_type: String
- Indicates the object type of unique identifiers specified in the object_ids property.
The following values are valid:
- network
- device
- application
- vlan
- device_group
- system
- object_ids: Array of Numbers
- The list of numeric values that represent unique identifiers. Unique identifiers can be retrieved through the /networks, /devices, /applications, /vlans, /devicegroups, /activitygroups, and /appliances resources. For system health metrics, specify the ID of the sensor or console and set the object_type parameter to "system".
- metric_category: String
- The group of metrics that are searchable in the metric catalog.
- metric_specs: Array of Objects
- An array of metric specification objects.
- name: String
- The field name for the metric. When filtering in the metric catalog on a metric_category, each result is a potential metric_spec name. When a result is selected from the catalog, the "Metric" field value is a valid option for this field.
- key1: String
- (Optional) Filter detail metrics. Detail metrics break down data through keys, which are strings or IP addresses. For example, the metric "HTTP Requests by Method" accepts a key1 value of "GET." Keys can also be regular expressions that are delimited with forward slashes ("/GET/").
- key2: String
- (Optional) Enable additional filtering on detail metrics.
- calc_type: String
- (Optional) The type of calculation to perform.
The following values are valid:
- mean
- percentiles
- percentiles: Array of Numbers
- (Optional) The list of percentiles, sorted in ascending order, which should be returned. This parameter is only required if the calc_type parameter is set to "percentiles". If the calc_type parameter is set to mean, the percentiles property cannot be set.
Specify the body parameter in the following JSON format.
{ "cycle": "string", "from": 0, "metric_category": "string", "metric_specs": { "name": "string", "key1": "string", "key2": "string", "calc_type": "string", "percentiles": [] }, "object_ids": [], "object_type": "string", "until": 0 }
Supported time units
For most parameters, the default unit for time measurement is milliseconds. However, the following parameters return or accept alternative time units such as minutes and hours:
- Device
- active_from
- active_until
- Device group
- active_from
- active_until
- Metrics
- from
- until
- Record Log
- from
- until
- context_ttl
The following table displays supported time units:
Time unit | Unit suffix |
---|---|
Year | y |
Month | M |
Week | w |
Day | d |
Hour | h |
Minute | m |
Second | s |
Millisecond | ms |
To specify a time unit other than milliseconds for a parameter, append the unit suffix to the value. For example, to request devices active in the last 30 minutes, specify the following parameter value:
GET /api/v1/devices?active_from=-30m
The following example specifies a search for HTTP records created between 1 and 2 hours ago:
{ "from": "-2h", "until": "-1h", "types": ["~http"] }
Network
Networks are correlated to the network interface card that receives input from all of the objects identified by the ExtraHop system.
On a console, each connected sensor is identified as a network capture. For more information, see Networks.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /networks | Retrieve all networks. |
GET /networks/{id} | Retreive a specific network by ID. |
PATCH /networks/{id} | Update a specific network by ID. |
GET /networks/{id}/alerts | Retrieve all alerts that are assigned to a specific network. |
POST /networks/{id}/alerts | Assign and unassign alerts to a specific network. |
DELETE /networks/{id}/alerts/{child-id} | Unassign an alert from a specific network. |
POST /networks/{id}/alerts/{child-id} | Assign an alert to a specific network. |
GET /networks/{id}/vlans | Retrieve all VLANS assigned to a specific network. |
Operation details
GET /networks
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "appliance_uuid": "string", "description": "string", "id": 0, "idle": true, "mod_time": 0, "name": "string", "node_id": 0 }
PATCH /networks/{id}
Specify the following parameters.
- body: Object
- Property value updates to apply to the network.
- id: Number
- Unique identifier of the network.
GET /networks/{id}
Specify the following parameters.
- id: Number
- Unique identifier of the network.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "appliance_uuid": "string", "description": "string", "id": 0, "idle": true, "mod_time": 0, "name": "string", "node_id": 0 }
GET /networks/{id}/alerts
Specify the following parameters.
- id: Number
- Unique identifier of the network.
- direct_assignments_only: Boolean
- (Optional) Restrict results to only alerts directly assigned to the network.
POST /networks/{id}/alerts
Specify the following parameters.
- body: Object
- Lists of alert IDs to assign and/or unassign.
- assign: Array of Numbers
- IDs of resources to assign
- unassign: Array of Numbers
- IDs of resources to unassign
Specify the body parameter in the following JSON format.
{ "assign": [], "unassign": [] }
- id: Number
- Unique identifier of the network.
POST /networks/{id}/alerts/{child-id}
Specify the following parameters.
- child-id: Number
- Unique identifier of the alert.
- id: Number
- Unique identifier of the network.
Network locality entry
You can manage a list that specifies the network locality of IP addresses.
For example, you can create an entry in the network locality list that specifies that an IP address or CIDR block is internal or external.
The following table displays all of the operations you can perform on this resource:
Operation | Description | ||
---|---|---|---|
GET /networklocalities | Retrieve all network locality entries. | ||
POST /networklocalities | Create a network locality entry. | ||
DELETE /networklocalities/{id} | Delete a network locality entry.
|
||
GET /networklocalities/{id} | Retrieve a specific network locality entry. | ||
PATCH /networklocalities/{id} | Apply updates to a specific network locality entry.
|
Operation details
GET /networklocalities
If the request is successful, the ExtraHop system returns an object in the following format.
{ "description": "string", "external": true, "id": 0, "mod_time": 0, "name": "string", "network": "string", "networks": [] }
POST /networklocalities
Specify the following parameters.
- body: Object
- Apply the specified property values to the new network locality entry.
- name: String
- (Optional) The name of the network locality. If this field is not specified, the network locality is named in the following format: "locality_ID", where ID is the unique identifier of the network locality.
- network: String
- (Optional) Deprecated. Specify CIDR blocks or IP addresses with the networks field.
- networks: Array of Strings
- (Optional) An array of CIDR blocks or IP addresses that define the network locality.
- external: Boolean
- Indicates whether the network is internal or external.
- description: String
- (Optional) An optional description of the network locality entry.
Specify the body parameter in the following JSON format.
{ "description": "string", "external": true, "name": "string", "network": "string", "networks": [] }
GET /networklocalities/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the network locality entry.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "description": "string", "external": true, "id": 0, "mod_time": 0, "name": "string", "network": "string", "networks": [] }
DELETE /networklocalities/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the network locality entry.
PATCH /networklocalities/{id}
Specify the following parameters.
- body: Object
- Apply the specified property value updates to the network locality entry.
- network: String
- (Optional) Deprecated. Specify CIDR blocks or IP addresses with the networks field.
- networks: Array of Strings
- (Optional) An array of CIDR blocks or IP addresses that define the network locality.
- name: String
- (Optional) The name of the network locality.
- external: Boolean
- (Optional) Indicates whether the network is internal or external.
- description: String
- (Optional) An optional description of the network locality entry.
Specify the body parameter in the following JSON format.
{ "description": "string", "external": true, "name": "string", "network": "string", "networks": [] }
- id: Number
- The unique identifier for the network locality entry.
Node
A node is a sensor that is connected to a console.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /nodes | Retrieve all sensors connected to this console. |
GET /nodes/{id} | Retrieve a specific sensor that is connected to this console. |
PATCH /nodes/{id} | Update a specific sensor that is connected to this console. |
Operation details
GET /nodes
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "add_time": 0, "display_name": "string", "enabled": true, "firmware_version": "string", "hostname": "string", "id": 0, "license_status": "string", "nickname": "string", "ntp_sync": true, "product_key": "string", "status_code": "string", "status_message": "string", "time_added": 0, "time_offset": 0, "uuid": "string" }
GET /nodes/{id}
Specify the following parameters.
- id: Number
- The ID of the sensor.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "add_time": 0, "display_name": "string", "enabled": true, "firmware_version": "string", "hostname": "string", "id": 0, "license_status": "string", "nickname": "string", "ntp_sync": true, "product_key": "string", "status_code": "string", "status_message": "string", "time_added": 0, "time_offset": 0, "uuid": "string" }
Observations
An observation associates the IP address of a device on the ExtraHop system with an IP address outside of your network. For example, you can track the activity of a VPN user by associating the IP address of the VPN client on your internal network with the external IP address assigned to the user on the public internet.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
POST /observations/associatedipaddrs | Add an observation to create an association between device IP addresses. |
Operation details
POST /observations/associatedipaddrs
Specify the following parameters.
- body: Object
- The observation parameters.
- observations: Array of Objects
- An array of observations.
- ipaddr: String
- The device IP address observed by the sensor or console.
- associated_ipaddr: String
- The associated IP address.
- timestamp: Number
- The time that the observation was created by the source, expressed in milliseconds since the epoch.
- source: String
- The source of the observations.
Specify the body parameter in the following JSON format.
{ "observations": { "ipaddr": "string", "associated_ipaddr": "string", "timestamp": 0 }, "source": "string" }
Open Data Stream
An open data stream (ODS) is a channel through which you can send specified metric data from a sensor to an external, third-party system. For example, you might want to store or analyze metric data with a remote tool, such as Splunk, MongoDB, or Amazon Web Services (AWS).
Sending data through an open data stream is a two-step procedure. First, you configure a connection to the target system that will receive the data. Second, you write a trigger that specifies what data to send to the target system and when to send it. For more information, see Open Data Streams.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /odstargets | Retrieve all Open Data Stream targets. |
GET /odstargets/http | Retrieve all HTTP Open Data Stream targets. |
POST /odstargets/http | Create a new HTTP Open Data Stream target. |
DELETE /odstargets/http/{name} | Delete an HTTP Open Data Stream target. |
GET /odstargets/http/{name} | Retrieve a specific HTTP Open Data Stream target. |
GET /odstargets/kafka | Retrieve all Kafka Open Data Stream targets. |
POST /odstargets/kafka | Create a new Kafka Open Data Stream target. |
DELETE /odstargets/kafka/{name} | Delete a Kafka Open Data Stream target. |
GET /odstargets/kafka/{name} | Retrieve a specific Kafka Open Data Stream target. |
GET /odstargets/mongodb | Retrieve all MongoDB Open Data Stream targets. |
POST /odstargets/mongodb | Create a new MongoDB Open Data Stream target. |
DELETE /odstargets/mongodb/{name} | Delete a MongoDB Open Data Stream target. |
GET /odstargets/mongodb/{name} | Retrieve a specific MongoDB Open Data Stream target. |
GET /odstargets/raw | Retrieve all Raw Open Data Stream targets. |
POST /odstargets/raw | Create a new Raw Open Data Stream target. |
DELETE /odstargets/raw/{name} | Delete a Raw Open Data Stream target. |
GET /odstargets/raw/{name} | Retrieve a specific Raw Open Data Stream target. |
GET /odstargets/syslog | Retrieve all Syslog Open Data Stream targets. |
POST /odstargets/syslog | Create a new Syslog Open Data Stream target. |
DELETE /odstargets/syslog/{name} | Delete a Syslog Open Data Stream target. |
GET /odstargets/syslog/{name} | Retrieve a specific Syslog Open Data Stream target. |
Operation details
GET /odstargets
If the request is successful, the ExtraHop system returns an object in the following format.
{}
GET /odstargets/http
If the request is successful, the ExtraHop system returns an object in the following format.
{}
GET /odstargets/http/{name}
Specify the following parameters.
- name: String
- The name of the target.
If the request is successful, the ExtraHop system returns an object in the following format.
{}
GET /odstargets/kafka
If the request is successful, the ExtraHop system returns an object in the following format.
{ "brokers": [], "compression": "string", "name": "string", "partition_strategy": "string", "protocol": "string", "skip_cert_verification": true, "tls_ca_certs": "string", "tls_client_cert": "string", "tls_client_key": "string" }
GET /odstargets/kafka/{name}
Specify the following parameters.
- name: String
- The name of the target.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "brokers": [], "compression": "string", "name": "string", "partition_strategy": "string", "protocol": "string", "skip_cert_verification": true, "tls_ca_certs": "string", "tls_client_cert": "string", "tls_client_key": "string" }
GET /odstargets/mongodb
If the request is successful, the ExtraHop system returns an object in the following format.
{}
GET /odstargets/mongodb/{name}
Specify the following parameters.
- name: String
- The name of the target.
If the request is successful, the ExtraHop system returns an object in the following format.
{}
GET /odstargets/raw
If the request is successful, the ExtraHop system returns an object in the following format.
{}
GET /odstargets/raw/{name}
Specify the following parameters.
- name: String
- The name of the target.
If the request is successful, the ExtraHop system returns an object in the following format.
{}
GET /odstargets/syslog
If the request is successful, the ExtraHop system returns an object in the following format.
{ "batch_min_bytes": 0, "concurrent_connections": 0, "host": "string", "localtime": true, "name": "string", "port": 0, "protocol": "string", "skip_cert_verification": true, "tcp_length_prefix_framing": true, "tls_ca_certs": "string", "tls_client_cert": "string", "tls_client_key": "string" }
GET /odstargets/syslog/{name}
Specify the following parameters.
- name: String
- The name of the target.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "batch_min_bytes": 0, "concurrent_connections": 0, "host": "string", "localtime": true, "name": "string", "port": 0, "protocol": "string", "skip_cert_verification": true, "tcp_length_prefix_framing": true, "tls_ca_certs": "string", "tls_client_cert": "string", "tls_client_key": "string" }
POST /odstargets/http
Specify the following parameters.
- body: Object
-
- name: String
- The name for the target.
- host: String
- The hostname or IP address of the remote HTTP server.
- port: Number
- The TCP port number of the HTTP server.
- protocol: String
- The protocol to transmit data over.
The following values are valid:
- http
- https
- skip_cert_verification: Boolean
- (Optional) Indicates whether to bypass TLS certificate verification for encrypted data. This parameter is valid only if `protocol` is set to `https`.
- pipeline: Boolean
- Indicates whether multiple concurrent HTTP connections are enabled, which can improve throughput speed.
- additional_header: String
- (Optional) Specifies an additional HTTP header to include in each request. Headers must be specified in the following format: "<key>:<value>". For example: "additional_header": "Accept: text/html".
- authentication: Object
- An object that contains HTTP authentication credentials.
- auth_type: String
- The type of HTTP authentication.
The following values are valid:
- none
- basic
- aws
- azure_storage
- azure_ad
- crowdstrike
- username: String
- (Optional) The name of the user. This option is required if `auth_type` is set to `basic` or if `auth_type` is set to `azure_ad` and `grant_type` is set to `resource_owner`.
- password: String
- (Optional) The password of the user. This option is required if `auth_type` is set to `basic` or if `auth_type` is set to `azure_ad` and `grant_type` is set to `resource_owner`.
- access_key: String
- (Optional) The access key ID. This option is required for AWS and Azure Storage authentication.
- secret_key: String
- (Optional) The secret access key. This option is required for AWS authentication.
- service: String
- (Optional) The service code of the AWS service, such as "AmazonEC2". This option is required for AWS authentication.
- region: String
- (Optional) The name of the AWS region, such as "us-west-1". This option is required for AWS authentication.
- grant_type: String
- (Optional) The OAuth 2.0 grant type. This option is required for Microsoft Entra ID authentication.
The following values are valid:
- client
- resource_owner
- client_id: String
- (Optional) The client ID. This option is required for Microsoft Entra ID and Crowdstrike authentication.
- client_secret: String
- (Optional) The client Secret Key. This option is required for Microsoft Entra ID and Crowdstrike authentication.
- resource: String
- (Optional) The Microsoft Entra ID resource URI. This option is required for Microsoft Entra ID authentication.
- token_endpoint: String
- (Optional) The Microsoft Entra ID /token endpoint. For example: "https://login.microsoftonline.com/<tenant_id>/oauth2/token". This option is required for Microsoft Entra ID authentication.
Specify the body parameter in the following JSON format.
{ "additional_header": "string", "authentication": { "auth_type": "string", "username": "string", "password": "string", "access_key": "string", "secret_key": "string", "service": "string", "region": "string", "grant_type": "string", "client_id": "string", "client_secret": "string", "resource": "string", "token_endpoint": "string" }, "host": "string", "name": "string", "pipeline": true, "port": 0, "protocol": "string", "skip_cert_verification": true }
POST /odstargets/kafka
Specify the following parameters.
- body: Object
-
- name: String
- The name for the target.
- brokers: Array of Objects
- An array of one or more objects that contain information about Kafka Brokers.
- host: String
- The hostname or IP address of the remote Kafka broker.
- port: Number
- The TCP port number of the Kafka broker.
- compression: String
- (Optional) The compression method to apply to transmitted data.
The following values are valid:
- none
- gzip
- snappy
- partition_strategy: String
- (Optional) The partitioning method to apply to transmitted data.
The following values are valid:
- hash_key
- manual
- random
- round_robin
- protocol: String
- The protocol to transmit data over.
The following values are valid:
- tcp
- tls
- tls_client_cert: String
- (Optional) The TLS client certificate that is sent to the Kafka server during the TLS handshake. Specify this option if client authentication is enabled on the Kafka server.
- tls_client_key: String
- (Optional) The private key of the TLS client certificate specified by the tls_client_cert parameter. Specify this option if client authentication is enabled on the Kafka server.
- skip_cert_verification: Boolean
- (Optional) Indicates whether to bypass TLS certificate verification for encrypted data. This parameter is valid only if protocol is set to tls.
- tls_ca_certs: String
- (Optional) The trusted certificates to validate the Kafka server certificate with, in PEM format. Specify this option if your Kafka server certificate has not been signed by a valid Certificate Authority (CA). If this option is not specified, the server certificate is validated with the built-in list of valid CA certificates. This option is valid only if the protocol is TLS.
- authentication: Object
- (Optional) An object that contains Kafka authentication credentials.
- auth_type: String
- The type of SASL authentication.
The following values are valid:
- scram
- username: String
- The username of the SASL user.
- password: String
- The password of the SASL user.
- algorithm: String
- The hashing algorithm for SASL authentication.
The following values are valid:
- sha256
- sha512
Specify the body parameter in the following JSON format.
{ "authentication": { "auth_type": "string", "username": "string", "password": "string", "algorithm": "string" }, "brokers": { "host": "string", "port": 0 }, "compression": "string", "name": "string", "partition_strategy": "string", "protocol": "string", "skip_cert_verification": true, "tls_ca_certs": "string", "tls_client_cert": "string", "tls_client_key": "string" }
POST /odstargets/mongodb
Specify the following parameters.
- body: Object
-
- name: String
- The name for the target.
- host: String
- The hostname or IP address of the remote MongoDB server.
- port: Number
- The TCP port number of the MongoDB server.
- encrypt: Boolean
- (Optional) Indicates whether data is encrypted with TLS.
- skip_cert_verification: Boolean
- (Optional) Indicates whether to bypass TLS certificate verification for encrypted data. This parameter is valid only if `encrypt` is set to `true`.
- authentication: Array of Objects
- (Optional) An array of objects that contain MongoDB authentication credentials.
- database: String
- The name of the MongoDB database.
- user: String
- The name of the user that has permission to modify the specified database.
- password: String
- The password of the user.
Specify the body parameter in the following JSON format.
{ "authentication": { "database": "string", "user": "string", "password": "string" }, "encrypt": true, "host": "string", "name": "string", "port": 0, "skip_cert_verification": true }
POST /odstargets/raw
Specify the following parameters.
- body: Object
-
- name: String
- The name for the target.
- host: String
- The hostname or IP address of the remote server.
- port: Number
- The TCP or UDP port number of the remote server.
- protocol: String
- The protocol to transmit data over.
The following values are valid:
- tcp
- udp
- compression: Boolean
- (Optional) Indicates whether gzip compression is applied to transmitted data.
- gzip_threshold_bytes: Number
- (Optional) The number of bytes that specifies the threshold for creating a new message. Every 30 seconds, the sensor or console sends messages that exceed the specified size to prevent messages from growing too large. This option is valid only if `compression` is set to `true`.
- gzip_threshold_seconds: Number
- (Optional) The number of seconds that specifies the threshold for creating a new message. Every 30 seconds, the sensor or console sends messages that have been written for more than the specified time period to prevent messages from growing too large. This option is valid only if `compression` is set to `true`.
Specify the body parameter in the following JSON format.
{ "compression": true, "gzip_threshold_bytes": 0, "gzip_threshold_seconds": 0, "host": "string", "name": "string", "port": 0, "protocol": "string" }
POST /odstargets/syslog
Specify the following parameters.
- body: Object
-
- name: String
- The name for the target.
- host: String
- The hostname or IP address of the remote Syslog server.
- port: Number
- The TCP or UDP port number of the remote Syslog server.
- tcp_length_prefix_framing: Boolean
- (Optional) Indicates whether to prepend the number of bytes in a message to the beginning of the message. If this parameter is set to false, the end of each message is delimited by a trailing newline.
- batch_min_bytes: Number
- (Optional) The minimum number of bytes to send at a time to the syslog server.
- concurrent_connections: Number
- (Optional) The number of concurrent connections to send messages over.
- localtime: Boolean
- (Optional) Indicates whether timestamps reference the local time zone of the sensor or console. If this parameter is set to false, timestamps reference GMT.
- protocol: String
- The protocol to transmit data over.
The following values are valid:
- tcp
- udp
- tls
- tls_client_cert: String
- (Optional) The TLS client certificate that is sent to the Syslog server during the TLS handshake. Specify this option if client authentication is enabled on the Syslog server.
- tls_client_key: String
- (Optional) The private key of the TLS client certificate specified by the tls_client_cert parameter. Specify this option if client authentication is enabled on the Syslog server.
- skip_cert_verification: Boolean
- (Optional) Indicates whether to bypass TLS certificate verification for encrypted data. This parameter is valid only if protocol is set to tls.
- tls_ca_certs: String
- (Optional) The trusted certificates to validate the Syslog server certificate with, in PEM format. Specify this option if your Syslog server certificate has not been signed by a valid Certificate Authority (CA). If this option is not specified, the server certificate is validated with the built-in list of valid CA certificates. This option is valid only if the protocol is TLS and skip_cert_verification is false.
Specify the body parameter in the following JSON format.
{ "batch_min_bytes": 0, "concurrent_connections": 0, "host": "string", "localtime": true, "name": "string", "port": 0, "protocol": "string", "skip_cert_verification": true, "tcp_length_prefix_framing": true, "tls_ca_certs": "string", "tls_client_cert": "string", "tls_client_key": "string" }
DELETE /odstargets/http/{name}
Specify the following parameters.
- name: String
- The name of the target.
DELETE /odstargets/kafka/{name}
Specify the following parameters.
- name: String
- The name of the target.
DELETE /odstargets/mongodb/{name}
Specify the following parameters.
- name: String
- The name of the target.
Packet Search
You can search for and download packets stored on the ExtraHop system. The downloaded packets can then be analyzed through a third-party tool, such as Wireshark.
For more information about Packets, see Packets.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /packets/search | Search for packets by specifying parameters in a URL. |
POST /packets/search | Search for packets by specifying parameters in a JSON string. |
Operation details
GET /packets/search
Specify the following parameters.
- output: String
- (Optional) The output format.
* `pcap` - A PCAP file that contains packets.
* `keylog_txt` - A keylog text file that contains secrets for decryption.
* `pcapng` - A PCAPNG file that can contain both packets and secrets for decryption.
* `zip` - A ZIP file that contains both a PCAP and keylog text file.
* `extract` - A ZIP file that contains files extracted from packets that matched the query. This option is valid only if you have full access to the NDR module.
The following values are valid:
- pcap
- keylog_txt
- pcapng
- zip
- extract
- include_secrets: Boolean
- (Optional) Specifies whether to include secrets in the PCAPNG file. This option is valid only if `output` is set to `pcapng`.
- decrypt_files: Boolean
- (Optional) Specifies whether to decrypt extracted files with stored secrets. This option is valid only if the `output` parameter is `extract`.
- limit_bytes: String
- (Optional) The approximate maximum number of bytes to return. After the ExtraHop system finds packets that match the size specified in the search criteria, the system stops searching for additional packets. However, because the system analyzes multiple packets at a time, the total size of the packets returned might be larger than the specified size. The default unit is bytes, but you can specify other units with a unit suffix. The default value is "100MB". **Note**: If the output is "extract", there is a maximum value for this field. The default maximum is "100MB", but the maximum can be modified in the running configuration. If the output is not "extract", there is no maximum value.
- limit_search_duration: String
- (Optional) The approximate maximum amount of time to perform the packet search. After the specified amount of time has passed, the ExtraHop system stops searching for additional packets. However, the system will extend past the specified time to finish analyzing packets that were being searched before the time expired, and the system analyzes multiple packets at a time. Therefore, the search might last longer than the specified time. The default unit is milliseconds, but other units can be specified with a unit suffix. See the REST API Guide for supported time units and suffixes. The default value is "5m". **Note**: If the output is "extract", there is a maximum value for this field. The default maximum is "5m", but the maximum can be modified in the running configuration. If the output is not "extract", there is no maximum value.
- always_return_body: Boolean
- (Optional) Specifies the behavior if the query does not match any packets or if the packets matched by the query do not contain any files. If the value is true, the system returns an empty file and a 200 status code. If the value is false, the system returns a 204 status code but does not return a file.
- from: String
- The beginning timestamp of the time range the search will include, expressed in milliseconds since the epoch. A negative value specifies that the search will begin with packets captured at a time in the past. For example, specify -10m to begin the search with packets captured 10 minutes before the time of the request. Negative values can be specified with a time unit other than milliseconds, such as seconds or hours. See the REST API Guide for supported time units and suffixes.
- until: String
- (Optional) The ending timestamp of the time range the search will include, expressed in milliseconds since the epoch. A 0 value specifies that the search will end with packets captured at the time of the search. A negative value specifies that the search will end with packets captured at a time in the past. For example, specify -5m to end the search with packets captured 5 minutes before the time of the request. Negative values can be specified with a time unit other than milliseconds, such as seconds or hours. See the REST API Guide for supported time units and suffixes.
- bpf: String
- (Optional) The Berkeley Packet Filter (BPF) syntax for the packet search. For more information about BPF syntax, see the REST API Guide.
- ip1: String
- (Optional) Returns packets sent to or received by the specified IP address.
- port1: String
- (Optional) Returns packets sent from or received on the specified port.
- ip2: String
- (Optional) Returns packets sent to or received by the specified IP address.
- port2: String
- (Optional) Returns packets sent from or received on the specified port.
POST /packets/search
Specify the following parameters.
- body: Object
- The parameters of the packet search.
- output: String
- (Optional) The output format.
The following values are valid:
- pcap
- keylog_txt
- pcapng
- zip
- extract
- include_secrets: Boolean
- (Optional) Whether or not to include TLS secrets together with packet data in .pcapng files. Only valid if "output" is "pcapng".
- decrypt_files: Boolean
- (Optional) Specifies whether to decrypt extracted files with stored secrets. This option is valid only if the `output` parameter is `extract`.
- limit_bytes: String
- (Optional) The approximate maximum number of bytes to return. After the ExtraHop system finds packets that match the size specified in the search criteria, the system stops searching for additional packets. However, because the system analyzes multiple packets at a time, the total size of the packets returned might be larger than the specified size. The default unit is bytes, but you can specify other units with a unit suffix. The default value is "100MB". **Note**: If the output is "extract", there is a maximum value for this field. The default maximum is "100MB", but the maximum can be modified in the running configuration. If the output is not "extract", there is no maximum value.
- limit_search_duration: String
- (Optional) The approximate maximum amount of time to perform the packet search. After the specified amount of time has passed, the ExtraHop system stops searching for additional packets. However, the system will extend past the specified time to finish analyzing packets that were being searched before the time expired, and the system analyzes multiple packets at a time. Therefore, the search might last longer than the specified time. The default unit is milliseconds, but other units can be specified with a unit suffix. See the REST API Guide for supported time units and suffixes. The default value is "5m". **Note**: If the output is "extract", there is a maximum value for this field. The default maximum is "5m", but the maximum can be modified in the running configuration. If the output is not "extract", there is no maximum value.
- always_return_body: Boolean
- (Optional) Specifies the behavior if the query does not match any packets or if the packets matched by the query do not contain any files. If the value is true, the system returns an empty file and a 200 status code. If the value is false, the system returns a 204 status code but does not return a file.
- from: String
- The beginning timestamp of the time range the search will include, expressed in milliseconds since the epoch. A negative value specifies that the search will begin with packets captured at a time in the past. For example, specify -10m to begin the search with packets captured 10 minutes before the time of the request. Negative values can be specified with a time unit other than milliseconds, such as seconds or hours. See the REST API Guide for supported time units and suffixes.
- until: String
- (Optional) The ending timestamp of the time range the search will include, expressed in milliseconds since the epoch. A 0 value specifies that the search will end with packets captured at the time of the search. A negative value specifies that the search will end with packets captured at a time in the past. For example, specify -5m to end the search with packets captured 5 minutes before the time of the request. Negative values can be specified with a time unit other than milliseconds, such as seconds or hours. See the REST API Guide for supported time units and suffixes.
- bpf: String
- (Optional) The Berkeley Packet Filter (BPF) syntax for the packet search. For more information about BPF syntax, see Filter packets with Berkeley Packet Filter syntax.
- ip1: String
- (Optional) Returns packets sent to or received by the specified IP address.
- port1: String
- (Optional) Returns packets sent from or received on the specified port.
- ip2: String
- (Optional) Returns packets sent to or received by the specified IP address.
- port2: String
- (Optional) Returns packets sent from or received on the specified port.
Specify the body parameter in the following JSON format.
{ "always_return_body": true, "bpf": "string", "decrypt_files": true, "from": "string", "include_secrets": true, "ip1": "string", "ip2": "string", "limit_bytes": "string", "limit_search_duration": "string", "output": "string", "port1": "string", "port2": "string", "until": "string" }
Filter packets with Berkeley Packet Filter syntax
Search for packets with the Berkeley Packet Filter (BPF) syntax alone, or in combination with the built-in filters.
Berkeley Packet Filters are a raw interface to data link layers and are a powerful tool for intrusion detection analysis. The BPF syntax enables users to write filters that quickly drill down on specific packets to see the essential information.
The ExtraHop system constructs a synthetic packet header from the packet index data and then runs the BPF syntax queries against the packet header to ensure that queries are much faster than scanning the full packet payload. Note that ExtraHop supports only a subset of the BPF syntax. See Supported BPF syntax.
The BPF syntax consists of one or more primitives preceded by one or more qualifiers. Primitives usually consist of an ID (name or number) preceded by one or more qualifiers. There are three different kinds of qualifiers:
- type
- Qualifiers that indicate what type the ID name or number refers to. For example, host, net, port, and portrange. If there is no qualifier, host is assumed.
- dir
- Qualifiers that specify a particular transfer direction to and or from an ID. Possible directions are src, dst, src and dst, and src or dst. For example, dst net 128.3.
- proto
- Qualifiers that restrict the match to the particular protocol. Possible protocols are ether, ip, ip6, tcp, and udp.
Supported BPF syntax
The ExtraHop system supports the following subset of the BPF syntax for filtering packets.
Note: |
|
Primitive | Examples | Description |
---|---|---|
[src|dst] host <host ip> | host 203.0.113.50 dst host 198.51.100.200 |
Matches a host as the IP source, destination, or either. These host expressions can be specified in conjunction with other protocols like ip, arp, rarp or ip6. |
ether [src|dst] host <MAC> | ether host 00:00:5E:00:53:00 ether dst host 00:00:5E:00:53:00 |
Matches a host as the Ethernet source, destination, or either. |
vlan <ID> | vlan 100 | Matches a VLAN. Valid ID numbers are 0-4095. VLAN priority
bits are zero. If the original packet had more than one VLAN tag, the synthetic packet the BPF matches against will only have the innermost VLAN tag. |
[src|dst] portrange <p1>-<p2>
or [tcp|udp] [src|dst] portrange <p1>-<p2> |
src portrange 80-88 tcp dst portrange 1501-1549 |
Matches packets to or from a port in the given range. Protocols can be applied to a port range to filter specific packets within the range. |
[ip|ip6][src|dst] proto <protocol> | proto 1 src 10.4.9.40 and proto ICMP ip6 and src fe80::aebc:32ff:fe84:70b7 and proto 47 ip and src 10.4.9.40 and proto 0x0006 |
Matches IPv4 or IPv6 protocols other than TCP and UDP. The protocol can be a number or name. |
[ip|ip6][tcp|udp] [src|dst] port <port> | udp and src port 2005 ip6 and tcp and src port 80 |
Matches IPv4 or IPv6 packets on a specific port. |
[src|dst] net <network> | dst net 192.168.1.0 src net 10 net 192.168.1.0/24 |
Matches packets to or from a source or destination or either, that reside in a
network. An IPv4 network number can be specified as one of the following values:
|
[ip|ip6] tcp tcpflags & (tcp-[ack|fin|syn|rst|push|urg|) | tcp[tcpflags] & (tcp-ack) !=0 tcp[13] & 16 !=0 ip6 and (ip6[40+13] & (tcp-syn) != 0) |
Matches all packets with the specified TCP flag |
Fragmented IPv4 packets (ip_offset != 0) | ip[6:2] & 0x3fff != 0x0000 | Matches all packets with fragments. |
Pairing
This resource enables you to generate a token required to connect a sensor to a console.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
POST /pairing/token | Generate a token required to connect the sensor to a console. |
Record Log
Records are structured flow and transaction information about events on your network.
After you connect the ExtraHop system to a record store, you can generate and send record information to the recordstore, and you can query records to retrieve information about any object on your network. For more information, see Query for records through the REST API.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /records/cursor/{cursor} | Deprecated. Replaced by POST /records/cursor. |
POST /records/cursor | Retrieve records starting at a specified cursor. This operation is only supported if records are stored on an ExtraHop recordstore (such as the EXA 5300) or on CrowdStrike LogScale. |
POST /records/search | Perform a record log query. |
Operation details
POST /records/search
Specify the following parameters.
- body: Object
- The record log query.
- from: Number
- The beginning timestamp of the time range the query will search, expressed in milliseconds since the epoch. A negative value specifies that the search will begin with records created at a time in the past. For example, specify -600000ms to begin the search with records created 10 minutes before the time of the request. Negative values can be specified with a time unit other than milliseconds, such as seconds or hours. See the REST API Guide for supported time units and suffixes.
- until: Number
- The ending timestamp of the time range the query will search, expressed in milliseconds since the epoch. A 0 value specifies that the search will end with records created at the time of the request. A negative value specifies that the search will end with records created at a time in the past. For example, specify -300000ms to end the search with records created 5 minutes before the time of the request. Negative values can be specified with a time unit other than milliseconds, such as seconds or hours. See the REST API Guide for supported time units and suffixes.
- types: Array of Strings
- (Optional) An array of one or more record formats. The query returns only records that match the specified formats. If no value is specified, the query returns records of any type. Valid values for this field are displayed in the Record Type field on the Record Formats page. For example: "~cifs".
- limit: Number
- The maximum number of records returned by the query. The maximum value cannot exceed 10000. The default value is 100.
- offset: Number
- The number of records to skip in the query results. The query will return records starting from the offset value. This parameter is often combined with the limit and sort parameters. The default value is 0. For ExtraHop recordstores, the maximum value is 10,000; to retrieve records returned after the first 10,000, see POST /records/cursor/. For third-party recordstores, there is no maximum value.
- sort: Array of Objects
- The list of one or more sort objects that specify sort priorities. The returned records are sorted in the order the objects are listed. The parameters are defined under the sort_item section below. If no sort_item values are provided, records are sorted by timestamp in descending order.
- field: String
- The field name that returned records are sorted by.
- direction: String
- The order in which returned records are sorted. The default order is descending. After all other sorting criteria are applied, or if no sorting criteria was specified, the default order is descending by timestamp.
The following values are valid:
- asc
- desc
- filter: Object
- The object containing the parameters that specify the filter criteria. The parameters are defined under the filter section below. If no filter values are provided, the query returns all records that match the time range and any specified record formats.
- field: String
- The name of the field in the record to be filtered. The query compares the contents of the field parameter to the value of the operand parameter. If the specified field name is ".any", the union of all field values will be searched. If the specified field name is ".ipaddr" or ".port", the client, server, sender, and receiver roles are included in the search. Field names are located in record formats that can be viewed in the ExtraHop system.
- operator: String
- The compare method applied when matching the operand value against the field contents. All filter objects require an operator.
The following values are valid:
- >
- <
- <=
- >=
- =
- !=
- startswith
- ~
- !~
- and
- or
- not
- exists
- not_exists
- in
- not_in
- operand: String or Number or Object
- The value that the query attempts to match. The query compares the value of the operand to the contents of the field parameter and applies the compare method specified by the operator parameter. You can explicitly specify the operand data type as described in the REST API Guide.
- rules: Array of Objects
- The list of one or more filter objects within a single filter object. Filter objects can be embedded recursively. Only "and", "or", and "not" operators are allowed for this parameter.
- context_ttl: Number
- The amount of time to keep the search context active. The specified value is interpreted as a duration into the future. The default unit is milliseconds, but other units can be specified with a unit suffix. See the REST API Guide for supported time units and suffixes. If a non-null value is specified, the response includes a cursor ID that is accepted by POST /records/cursor/. This parameter is not supported for third-party recordstores.
Specify the body parameter in the following JSON format.
{ "context_ttl": 0, "filter": { "field": "string", "operator": "string", "operand": "string", "rules": [] }, "from": 0, "limit": 0, "offset": 0, "sort": { "field": "string", "direction": "string" }, "types": [], "until": 0 }
POST /records/cursor
Specify the following parameters.
- body: Object
- The cursor ID that specifies the next page of results in the query.
- cursor: String
- The unique identifier of the cursor that specifies the next page of results in the query.
Specify the body parameter in the following JSON format.
{ "cursor": "string" }
- context_ttl: Number
- (Optional) The amount of time to keep the search context active, expressed in milliseconds.
GET /records/cursor/{cursor}
Specify the following parameters.
- cursor: String
- The cursor ID.
- context_ttl: Number
- (Optional) The amount of time to keep the search context active, expressed in milliseconds.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "cursor": "string", "from": 0, "records": {}, "total": 0, "until": 0, "warnings": {} }
Operand values in record queries
The operand field in the POST /records/search method specifies the value that a record query attempts to match. You can specify either the value only or both the data type and the value. If you specify only the value, the query will refer to the record format associated with the field parameter to determine the data type of the value.
The following example explicitly specifies the data type and value of the operand:
{ "from": -1000, "filter": { "field" : "senderAddr", "operator": "=", "operand" : { "type" : "ipaddr4", "value": "1.2.3.4" } } }
The following example specifies only the value of the operand:
{ "from": -1000, "filter": { "field" : "senderAddr", "operator": "=", "operand" : "1.2.3.4" } }
You can explicitly specify the following data types in the operand field:
- application
- boolean
- device
Note: You must specify the discovery ID of the device in the value field. You can find the discovery ID of a device through the POST /devices/search operation. - device_filter
- device_group
- flowinterface
- flownetwork
- ipaddr4
- ipaddr6
- number
- network_locality
- object
- string
The operand field supports CIDR notation when filtering by IP addresses; the operator field must be set to "=" or "!=".
{ "filter": { "operator": "and", "rules": [ { "field": "method", "operand": "SMB2_READ", "operator": "=" }, { "field": "reqL2Bytes", "operand": "100", "operator": ">" } ] }, "types": [ "~cifs" ], "from": "-30m" }
Query records with a device group filter
To filter records by device group in the REST API, you must send a POST request to the /records/search endpoint with a record query filter that meets the following criteria:
- The field must specify devices, such as client, server, sender, or receiver.
- The operator must be either in or not_in.
- The operandtype must be device_group.
- The operandvalue must be a string representation of the numerical device group ID. You can retrieve device group IDs by running the GET /devicegroup operation and viewing the contents of the id field in the response.
For example, the following query searches for records in which the client device was a member of a device group with an ID of 200:
{ "from": "-30m", "filter": { "field": "client", "operator": "in", "operand": { "type": "device_group", "value": "200" } } }
You can also filter records by device group criteria without creating a device group by specifying the operand type as device_filter. For example, the following query searches for records in which the client device is running Windows 10:
{ "from": "-30m", "filter": { "field": "client", "operator": "in", "operand": { "type": "device_filter", "value": { "field": "software", "operand": "windows_10", "operator": "=" } } } }
Note: | Operand values with type device_filter for record search are formatted the same as device search filters. For more information, see Operand values for device groups. |
Query records with a network locality filter
To filter records by device group in the REST API, you must send a POST request to the /records/search endpoint with a record query filter that meets the following criteria:
- The field must be a record field that specifies an IP address such as clientAddr, serverAddr, senderAddr, or receiverAddr.
- The operator must be either in or not_in.
- The operand type must be network_locality.
- The operand value must be a string representation of a numerical network locality ID. You can view locality IDs with the GET /networklocalities operation.
For example, the following query searches for records where the client device is in a network locality with an ID of 123:
{ "from": "-30m", "filter": { "field": "clientAddr", "operand": { "type": "network_locality", "value": "123" }, "operator": "in" } }
Supported time units
For most parameters, the default unit for time measurement is milliseconds. However, the following parameters return or accept alternative time units such as minutes and hours:
- Device
- active_from
- active_until
- Device group
- active_from
- active_until
- Metrics
- from
- until
- Record Log
- from
- until
- context_ttl
The following table displays supported time units:
Time unit | Unit suffix |
---|---|
Year | y |
Month | M |
Week | w |
Day | d |
Hour | h |
Minute | m |
Second | s |
Millisecond | ms |
To specify a time unit other than milliseconds for a parameter, append the unit suffix to the value. For example, to request devices active in the last 30 minutes, specify the following parameter value:
GET /api/v1/devices?active_from=-30m
The following example specifies a search for HTTP records created between 1 and 2 hours ago:
{ "from": "-2h", "until": "-1h", "types": ["~http"] }
Report
A report is a PDF file of a dashboard that you can schedule for email delivery to one or more recipients. You can specify how often the report email is delivered and the time interval for dashboard data included in the PDF file.
Important: | You can only schedule reports from an ECA VM. |
Here are some important considerations about dashboard reports:
- You can only create a report for dashboards that you own or have been shared with you. Your ability to create a report is determined by your user privileges. Contact your ExtraHop administrator for help.
- Each report can only link to one dashboard.
- If you created a report for a dashboard that was later deleted or became inaccessible to you, the scheduled email will continue to be sent to recipients. However, the email will not include the PDF file and will instead notify recipients that the dashboard is unavailable to the report owner.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /reports | Retrieve all reports. |
POST /reports | Create a report. |
DELETE /reports/{id} | Delete a specific report. |
GET /reports/{id} | Retrieve a specific report. |
PATCH /reports/{id} | Update a specific report. |
GET /reports/{id}/contents | Retrieve the contents of a specific report. |
PUT /reports/{id}/contents | Replace the contents of a specific report. |
GET /reports/{id}/download | Retrieve the PDF of a report. |
POST /reports/{id}/emailgroups | Change the email group assigned to a specific dashboard report. |
GET /reports/{id}/emailgroups | Retrieve a list of email groups assigned to a specific dashboard report. |
DELETE /reports/{id}/emailgroups/{group-id} | Remove an email group from a specific dashboard report. |
POST /reports/{id}/emailgroups/{group-id} | Add an email group to a specific dashboard report. |
POST /reports/{id}/queue | Immediately generate and send a specific report. |
Operation details
GET /reports
There are no parameters for this operation.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "cc": [], "description": "string", "email_message": "string", "email_subject": "string", "enabled": true, "from": "string", "id": 0, "include_links": "string", "name": "string", "output": {}, "owner": "string", "schedule": {}, "until": "string" }
POST /reports
Specify the following parameters.
- body: Object
- The contents of the report.
- name: String
- The name of the report.
- description: String
- (Optional) The description of the report.
- owner: String
- The username of the report owner.
- cc: Array of Strings
- The list of email addresses, not included in an email group, to receive reports.
- enabled: Boolean
- (Optional) Indicates whether the report is enabled.
- from: String
- The beginning timestamp of the time interval for the report contents, relative to the current time and expressed in milliseconds.
- until: String
- (Optional) The ending timestamp of the time interval for the report contents, relative to the current time and expressed in milliseconds.
- email_subject: String
- (Optional) The content of the subject line for the report email.
- schedule: Object
- (Optional) The object containing the parameters that specify the scheduled time range to generate and send the report. The parameters are defined in the schedule_type section below.
- type: String
- The type of delivery schedule for the report.
The following values are valid:
- hourly
- daily
- weekly
- monthly
- at: Array of Objects
- (Optional) The list of objects that specify the delivery parameters for the report. The parameters are defined in the at_type section below.
- by_day: Array of Strings
- (Optional) The days of the week to send the report.
The following values are valid:
- mo
- tu
- we
- th
- fr
- sa
- su
- on_day: Number
- (Optional) The day of the month to run the report on.
- tz: String
- (Optional) The timezone in which to send the report.
- hour: Number
- (Optional) The hour at which to send the report.
- minute: Number
- (Optional) The minute at which to send the report.
- interval: String
- (Optional) The interval may be previous_week, previous_month, or nothing.
The following values are valid:
- previous_week
- previous_month
- output: Object
- The object containing the parameters that specify the output format for the report. The parameters are defined in the format_type section below.
- type: String
- The output format for the report.
The following values are valid:
- width: String
- (Optional) The width option for the report output.
The following values are valid:
- narrow
- medium
- wide
- pagination: String
- (Optional) The pagination scheme for the report output.
The following values are valid:
- per_region
- theme: String
- (Optional) The display theme for the report output.
The following values are valid:
- light
- dark
- space
- contrast
Specify the body parameter in the following JSON format.
{ "cc": [], "description": "string", "email_subject": "string", "enabled": true, "from": "string", "name": "string", "output": { "type": "string", "width": "string", "pagination": "string", "theme": "string" }, "owner": "string", "schedule": { "type": "string", "at": { "by_day": [], "on_day": 0, "tz": "string", "hour": 0, "minute": 0 }, "interval": "string" }, "until": "string" }
POST /reports/{id}/queue
Specify the following parameters.
- id: Number
- The unique identifier for the report.
PATCH /reports/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the report.
- body: Object
- The contents of the report.
- name: String
- The name of the report.
- description: String
- (Optional) The description of the report.
- owner: String
- The username of the report owner.
- cc: Array of Strings
- The list of email addresses, not included in an email group, to receive reports.
- enabled: Boolean
- (Optional) Indicates whether the report is enabled.
- from: String
- The beginning timestamp of the time interval for the report contents, relative to the current time and expressed in milliseconds.
- until: String
- (Optional) The ending timestamp of the time interval for the report contents, relative to the current time and expressed in milliseconds.
- email_subject: String
- (Optional) The content of the subject line for the report email.
- schedule: Object
- (Optional) The object containing the parameters that specify the scheduled time range to generate and send the report. The parameters are defined in the schedule_type section below.
- type: String
- The type of delivery schedule for the report.
The following values are valid:
- hourly
- daily
- weekly
- monthly
- at: Array of Objects
- (Optional) The list of objects that specify the delivery parameters for the report. The parameters are defined in the at_type section below.
- by_day: Array of Strings
- (Optional) The days of the week to send the report.
The following values are valid:
- mo
- tu
- we
- th
- fr
- sa
- su
- on_day: Number
- (Optional) The day of the month to run the report on.
- tz: String
- (Optional) The timezone in which to send the report.
- hour: Number
- (Optional) The hour at which to send the report.
- minute: Number
- (Optional) The minute at which to send the report.
- interval: String
- (Optional) The interval may be previous_week, previous_month, or nothing.
The following values are valid:
- previous_week
- previous_month
- output: Object
- The object containing the parameters that specify the output format for the report. The parameters are defined in the format_type section below.
- type: String
- The output format for the report.
The following values are valid:
- width: String
- (Optional) The width option for the report output.
The following values are valid:
- narrow
- medium
- wide
- pagination: String
- (Optional) The pagination scheme for the report output.
The following values are valid:
- per_region
- theme: String
- (Optional) The display theme for the report output.
The following values are valid:
- light
- dark
- space
- contrast
Specify the body parameter in the following JSON format.
{ "cc": [], "description": "string", "email_subject": "string", "enabled": true, "from": "string", "name": "string", "output": { "type": "string", "width": "string", "pagination": "string", "theme": "string" }, "owner": "string", "schedule": { "type": "string", "at": { "by_day": [], "on_day": 0, "tz": "string", "hour": 0, "minute": 0 }, "interval": "string" }, "until": "string" }
GET /reports/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the report.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "cc": [], "description": "string", "email_message": "string", "email_subject": "string", "enabled": true, "from": "string", "id": 0, "include_links": "string", "name": "string", "output": {}, "owner": "string", "schedule": {}, "until": "string" }
GET /reports/{id}/download
Specify the following parameters.
- id: Number
- The unique identifier for the report.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "cc": [], "description": "string", "email_message": "string", "email_subject": "string", "enabled": true, "from": "string", "id": 0, "include_links": "string", "name": "string", "output": {}, "owner": "string", "schedule": {}, "until": "string" }
DELETE /reports/{id}
Specify the following parameters.
- id: Number
- The unique identifier for the report.
GET /reports/{id}/contents
Specify the following parameters.
- id: Number
- The unique identifier for the report.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "dashboard_id": 0, "params": {}, "type": "string" }
PUT /reports/{id}/contents
Specify the following parameters.
- id: Number
- The unique identifier for the report.
- body: Object
- The contents of the report.
POST /reports/{id}/emailgroups/{group-id}
Specify the following parameters.
- id: Number
- The unique identifier for the report.
- group-id: Number
- The unique identifier for the email group.
POST /reports/{id}/emailgroups
Specify the following parameters.
- id: Number
- The unique identifier for the report.
- body: Object
- The list of email group IDs to assign or unassign to the report.
- assign: Array of Numbers
- IDs of resources to assign
- unassign: Array of Numbers
- IDs of resources to unassign
Specify the body parameter in the following JSON format.
{ "assign": [], "unassign": [] }
Running config
The running configuration file is a JSON document that contains core system configuration information for the ExtraHop system.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /runningconfig | Retrieve the current running configuration file. |
PUT /runningconfig | Replace the current running configuration file. Configuration file changes are not automatically saved. |
POST /runningconfig/save | Save the current changes to the running configuration file. |
GET /runningconfig/saved | Retrieve the saved running configuration file. |
Software
You can view a list of software that the ExtraHop system has observed on your network.
Operation | Description |
---|---|
GET /software | Retrieve software observed by the ExtraHop system. |
GET /software/{id} | Retrieve software observed by the ExtraHop system by ID. |
Operation details
GET /software
Specify the following parameters.
- software_type: String
- (Optional) The type of software.
- name: String
- (Optional) The name of the software.
- version: String
- (Optional) The version of the software.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "description": "string", "id": "string", "name": "string", "software_type": "string", "version": "string" }
GET /software/{id}
Specify the following parameters.
- id: String
- The unique identifier for the software.
If the request is successful, the ExtraHop system returns an object in the following format.
{ "description": "string", "id": "string", "name": "string", "software_type": "string", "version": "string" }
TLS decrypt key
This resource enables you to add a decryption key for your network traffic.
The following table displays all of the operations you can perform on this resource:
Operation | Description |
---|---|
GET /ssldecryptkeys | Retrieve all TLS decryption keys. |
POST /ssldecryptkeys | Create a new TLS decryption key. |
DELETE /ssldecryptkeys/{id} | Remove an TLS key from the ExtraHop system. |
GET /ssldecryptkeys/{id} | Retrieve an TLS PEM and metadata. |
PATCH /ssldecryptkeys/{id} | Update an existing TLS decryption key. |
GET /ssldecryptkeys/{id}/protocols | Retrieve all protocols assigned to an TLS decryption key. |
POST /ssldecryptkeys/{id}/protocols | Create a new protocol for an TLS decryption key. |
DELETE /ssldecryptkeys/{id}/protocols/{protocol} | Delete a protocol from an TLS decryption key. |
Thank you for your feedback. Can we contact you to ask follow up questions?