Start Demo

Deploy an ExtraHop sensor on Google Cloud Platform

The following procedures explain how to deploy a virtual ExtraHop sensor in a Google Cloud environment. You must have experience deploying virtual machines in Google Cloud within your virtual network infrastructure.

An ExtraHop virtual sensor can help you to monitor the performance of your applications across internal networks, the public internet, or a virtual desktop interface (VDI), including database and storage tiers. The ExtraHop system can monitor application performance across geographically distributed environments, such as branch offices or virtualized environments through inter-VM traffic.

This installation enables you to run network performance monitoring, network detection and response, and intrusion detection on a single sensor.

Important:Before you can enable the IDS module on this sensor, you must upgrade the sensor firmware to version 9.6 or later. When the upgrade completes, you can apply the new license to the sensor.
Note:If you have enabled the IDS module on this sensor, and your ExtraHop system does not have direct access to the Internet and access to ExtraHop Cloud Services, you will need to upload IDS rules manually. For more information, see Upload IDS rules to the ExtraHop system through the REST API.

To ensure that the deployment is successful, make sure you have access and ability to create the required resources. You might need to work with other experts in your organization to ensure that the necessary resources are available.

System requirements

Your environment must meet the following requirements to deploy a virtual ExtraHop sensor in GCP:

  • You must have a Google Cloud Platform (GCP) account.
  • You must have the ExtraHop deployment file, which is available on the ExtraHop Customer Portal.
  • You must have an ExtraHop sensor product key.
  • You must have packet mirroring enabled in GCP to forward network traffic to the ExtraHop system. Packet mirroring must be configured to send traffic to nic1 (not nic0) of the ExtraHop instance. See https://cloud.google.com/vpc/docs/using-packet-mirroring.
    Important:To ensure the best performance for initial device synchronization, connect all sensors to the console and then configure network traffic forwarding to the sensors.
  • You must have firewall rules configured to allow DNS, HTTP, HTTPS, and SSH traffic for ExtraHop administration. See https://cloud.google.com/vpc/docs/using-firewalls.

Virtual machine requirements

You must provision a GCP instance type that most closely matches your ExtraHop virtual sensor size and that meets the following module requirements.

Sensor Modules Recommended Instance Type Datastore Disk Size
EDA 1100v EDA n1-standard-4 (4 vCPUs and 15 GB memory) 61 GB
EDA 6320v EDA + IDS n2-standard-32 (32 vCPUs and 128 GB memory) 1400 GB

Upload the ExtraHop deployment file

  1. Sign in to your Google Cloud Platform account.
  2. From the navigation menu, click Cloud Storage > Buckets.
  3. Click the name of the storage bucket where you want to upload the ExtraHop deployment file.
    If you do not have a preconfigured storage bucket, create one now.
  4. Click Upload files.
  5. Browse to the extrahop-<module>-gcp-<version>.tar.gz file you previously downloaded and click Open.

Next steps

When the file upload completes, you can create the image.

Create the image

  1. From the navigation menu, click Compute Engine > Images.
  2. Click Create Image.
  3. In the Name field, type a name to identify the ExtraHop sensor.
  4. From the Source drop-down list, select Cloud Storage file.
  5. In the Cloud Storage file section, click Browse, locate the extrahop-eda-gcp-<version>.tar.gz file in your storage bucket and then click Select.
  6. Configure any additional fields that are required for your environment.
  7. Click Equivalent Code.
    A panel opens on the right.
  8. In the Equivalent code panel, click Copy.
  9. Click Run in Cloud Shell.
    The copied text displays at the prompt.
  10. Add this option to the end of the command sequence:
    --guest-os-features=GVNIC
  11. Press ENTER.

Next steps

After the command runs, close Cloud Shell, and then click Cancel. Clicking Cancel does not cancel the creation of the image through Cloud Shell.

Create the datastore disk

  1. In the left pane on the Compute Engine page, click Disks.
  2. Click Create Disk.
  3. In the Name field, type a name to identify the ExtraHop disk.
  4. From the Disk source type drop-down list, click Image.
  5. From the Disk type drop-down list, select Standard persistent disk.
  6. From the Source image drop-down list, select the image that you previously created.
  7. In the Size field, type a value, in GB, for the disk size.

    For more information on selecting a disk size, see Virtual machine requirements.

  8. Configure any additional fields that are required for your environment.
  9. Click Create.

Create the VM instance

  1. In the left pane on the Compute Engine page, VM instances.
  2. Click Create Instance and complete the following steps:
    1. In the Name field, type a name to identify the ExtraHop instance.
    2. From the Region drop-down list, select your geographic region.
    3. From the Zone drop-down list, select a location within your geographic zone.
    4. In the Machine configuration section, select General Purpose for the machine family.

      For more information on selecting a machine type, see Virtual machine requirements.

    5. In the Boot disk section, click Change.
    6. Click Existing disks.
    7. From the Disk drop-down list, select the disk that you previously created.
    8. Click Select.
  3. Click Advanced options.
  4. Click Networking.
  5. In the Network tags field, type the following tag names, separating each name with a space:
    • https-server
    • http-server
    • dns
    • ssh-all


    Important:Network tags are required to apply firewall rules to the ExtraHop instance. If you do not have existing firewall rules that allow this traffic, you must create the rules. For more information, see https://cloud.google.com/vpc/docs/using-firewalls.
  6. In the Network interfaces section, click the management interface.
    1. From the Network drop-down list, select your management network.
    2. From the Subnetwork drop-down list, select your management network subnet.
    3. Configure any additional fields that are required for your environment.
    4. Click Done.
  7. Click Add a network interface to configure the data capture interface.
    Important:The management interface and data capture interface must be in different Virtual Private Cloud (VPC) networks.
    1. From the Network drop-down list, select your network that will mirror traffic to the ExtraHop system.
    2. From the Subnetwork drop-down list, select your network subnet.
    3. From the External IPv4 drop-down list, select None.
    4. Configure any additional fields that are required for your environment.
    5. Click Done.
  8. Click Create.

Create an instance group

  1. In the left pane on the Compute Engine page, click Instance groups.
  2. Click Create Instance Group.
  3. Click New unmanaged instance group.
  4. In the Name field, type an instance group name.
  5. From the Network drop-down list, select the network that the instance can access.
  6. From the Subnet drop-down list, select your network subnet.
  7. From the Select VM drop-down list, select your sensor.
  8. Click Create.

Create a load balancer

  1. From the navigation menu, click Network services > Load balancing.
    Note: If the Network services menu is not in your navigation menu, click More Products.
  2. Click Create Load Balancer.
  3. In the Network Load Balancer (UDP/Multiple protocols) section, click Start Configuration.
  4. Under Select a Load balancer type, click UDP load balancer.
  5. Under Internet facing or internal only, select Only between my VMs.
  6. Under Backend type, keep the default value (Backend Service).
  7. Click Continue.
  8. In the Load Balancer name field, type a load balancer name.
  9. From the Region drop-down list, select your geographic region.
  10. From the Network drop-down list, select your network.
  11. In the Backends section, from the Instance group drop-down list, select your instance group.
  12. Click Health check and then click Create a Health Check.
  13. In the Name field, type a health check name.
  14. From the Protocol drop-down list, select TCP.
  15. In the Port field, type 443.
  16. Click Save.

Create a traffic mirroring policy

  1. From the navigation menu, click VPC Network > Packet mirroring.
  2. Click Create Policy.
  3. In the Policy name field, type a new policy name.
  4. From the Region drop-down list, select your geographic region.
  5. Click Continue.
  6. Select Mirrored source and collector destination are in the same VPC network.
  7. From the Network drop-down list, select the VPC network.
  8. Click Continue.
  9. Select the Select one or more subnetworks checkbox.
  10. From the Select subnet drop-down list, select the checkbox next to your subnet.
  11. Click Continue.
  12. Select the checkbox next to the VM instance.
  13. Click Continue.
  14. From the Collector destination drop-down list. select the load balancer that you previously created.
  15. Click Continue.
  16. Select Mirror all traffic (default).
  17. Click Submit.

Configure the sensor

  1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
    The default login name is setup and the password is the VM instance ID.
  2. Accept the license agreement and then log in.
  3. Follow the prompts to enter the product key, change the default setup and shell user account passwords, connect to ExtraHop Cloud Services, and connect to an ExtraHop console.

Next steps

After the system is licensed, and you have verified that traffic is detected, complete the recommended procedures in the post-deployment checklist.

Configure L3 device discovery

You must configure the ExtraHop system to discover and track local and remote devices by their IP address (L3 Discovery). To learn how device discovery works in the ExtraHop system, see Device discovery.
  1. Log in to the Administration settings on the ExtraHop system through https://<extrahop-hostname-or-IP-address>/admin.
  2. In the System Configuration section, click Capture.
  3. Click Device Discovery.
  4. In the Local Device Discovery section, select the Enable local device discovery checkbox to enable L3 Discovery.
  5. In the Remote Device Discovery section, type the IP address in the IP address ranges field.
    You can specify one IP address or a CIDR notation, such as 192.168.0.0/24 for an IPv4 network or 2001:db8::/32 for an IPv6 network.
  6. Click Save.
Last modified 2024-04-19